Instruction/ maintenance manual of the product JiSS-330 Jensen
Go to page of 9
OWNER'S MANUAL JiSS-330 ® (iPod Not Included) PLEASE READ THIS OPERATING MANUAL COMPLETEL Y BEFORE OPERATING THIS UNIT AND RET AIN THIS BOOKLET FOR FUTURE REFERENCE ® DOCKING SPEAKER ST A TION FOR iPod JISS-330 US IB V .02 : 148.5 X 210mm 8 210 x 297mm 32 80gms bk+bk 2007.
TABLE OF CONTENTS 2 3 4 4 5 5-6 7 8 9 10 10 11 12 12 13 14 14 ® DEAR JENSEN CUSTOMER IMPORTANT SAFETY INSTRUCTIONS COMPLIANCE WITH FCC REGULATIONS PRODUCT FEA TURES INSTALLA TION LOCATION OF CONTROLS.
3 IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards.
INSTALLA TION 5 Remote Control battery The battery compartment is located on the bottom of the Remote Control. (1) Remove the battery compartment door . (2) Follow the polarity diagram shown inside the compartment and install 2 x "AAA" batteries (included).
® 1. iPod docking bay ® 2. iPod docking connector 3 . ON/ST ANDBY button ----- To turn the unit on or of f. 4. VOLUME + / - button ----- Adjust volume level up or down. 5. Three Speakers 6. Remote Infrared Sensor 7. DC15V IN jack ----- For the connection of external DC power supply.
9 i P o d D O C K I N G T his mode l inc lude s a da pt or s for a dopt ing diff e re nt i P od mode ls . If the doc king ba y will no t be u s e d for a n 1 . S e l e c t a s uit a bl e a da pt or for you r iP od a nd ins e rt it int o t he doc king ba y 2 .
11 AUXILIARY INPUT This model provides an auxiliary audio signal input for connecting an external audio device. You may connect an audio cable with 3.5 mm stereo plug (included) to the AUX IN Jack located on the back of the unit.
TROUBLESHOOTING GUIDE iPod mode is not selected. Symptom Possible Problem Solution The unit does not respond (no power) AC Adaptor is not plugged into a wall outlet or the output connector is not plugged into the DC15V IN jack on the back of the unit.
14 SPECIFICATIONS Power Requirement Main unit DC input : DC 15V , 1 100 mA Remote Control 2 x DC1.5V "AAA" (UM-4) Batteries Response 100 - 16000Hz Total Power Output 10 W max Frequency Printed in China SERVICE Please refer to the instructions on the enclosed warranty card for returning your unit for service.
An important point after buying a device Jensen JiSS-330 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen JiSS-330 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen JiSS-330 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen JiSS-330 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen JiSS-330 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen JiSS-330, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen JiSS-330.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen JiSS-330. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen JiSS-330 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
