Instruction/ maintenance manual of the product JiSS-250i Jensen
Go to page of 8
Port able S peaker St ation for iPod & iPhone INSTRUCTION MANUAL JiSS-250i (iPod & iPhone not included) Please read this Instruction Manual carefully before using the unit and retain it for fu.
1 IMPORT ANT INSTRUCTIONS 1. Do not install the system near any heat sources such as radiators, heat registers, stoves, or other apparatus (includi ng amplifiers) that produce heat. 2. Protect the power cord from being walked on or pinche d particularly at plugs, convenience receptacles, and the point w here they exit from the apparatus.
2 COMPLIANCE WITH FCC REGUL A TION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired o peration.
3 LOCA TION OF CONTROLS POWER SOURCE This Portable Speaker System is designed to operat e on 4 x 1.5V ‘AAA’ (UM-4) batteries (Not included) or with the included AC Adaptor. GETTING STARTED A. DC OPERA T ION For better performanc e and longer opera ting time, we recommend using alkaline -type batteries.
4 B. AC P OWER CONNECTION 1. Plug the AC adaptor into a household 120V AC ~ 60Hz power source. 2. Insert the other plug into the DC INPUT Jack on the back of JiSS-250i. Note: The b atteries will be automatically disconnected o nce the AC ada ptor is plugg ed into the DC Jack and the System will ope rate on AC power .
5 DOCKING YOUR IPod 1. Fold out the STANDS located on the bottom of JiSS-250i. 2. Select a suitable adaptor attachment for your iPod/iPhone and insert it into the docking tray. Your iPod/iPhone can now be inserted onto the dock connect or by aligning the connector on the bottom of the iPod onto the connector in the docking bay as shown below.
6 seconds to switch off the device and then gently remove it from the docking connector. 10. To turn JiSS-250i off, press the STANDBY Button again. Note: i. The System will automatically enter sleep mode 5 minutes after playback stops and switch to standby mode automatically after 30 minutes of no activity.
7 TROUBLESHOOTING GUIDE Should you experience any difficulti es in the use of this player please refer to the following chart or call 1 800 777 5331 for Product Service and Support. Symptom Possible Problem Solution Using a wrong iPod adaptor Make sure the adaptor properly fit s for your iPod.
An important point after buying a device Jensen JiSS-250i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen JiSS-250i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen JiSS-250i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen JiSS-250i you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen JiSS-250i will certainly help you make a decision on the purchase.
If you already are a holder of Jensen JiSS-250i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen JiSS-250i.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen JiSS-250i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen JiSS-250i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
