Instruction/ maintenance manual of the product JCD3006 Jensen
Go to page of 10
JCD3006 JCD3006 Inst allation and Operation Manual MOBILE CD PLAYER / RECEIVER.
JCD3006 2 SAFETY INFORMA TION When Driving Keep the volume level Iow enough to be aware of the road a nd traffic conditions. When Washing your V ehicle Do not expose the product to water or excessiv e moisture. Moisture can cause electrical shorts, fire or other damage.
JCD3006 3 INSTALLATION Before You Begin 1. Disconnect Battery Before you begin, always disconnect the battery negative terminal. 2. Remove T r ansport Screws Important Notes • Before final installation, test the wiring co nnections to make sure the unit is connected properly and the system works.
JCD3006 4 2. Carefully unsnap the plastic trim ring from t he front of the new radio chassis. Remove and discard the trim ring. 3. Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.
JCD3006 5 WIRING Power Antenna Connect to power antenna or amplifier , If not used, tape bare end of wire. Ground Connect to ground terminal or clean unpainted metal part of chassis. Memory / Battery Connect to battery or 12 volt power source that is always live.
JCD3006 6 BASIC OPERATION Control Panel Release (REL) Press the REL button (3) to release the control panel. Power On/Off ( ) Press the button (1) to turn the unit ON or OFF . Volume Control T o increase the volume, rotate the volume control knob (6) clockwise.
JCD3006 7 T UNER OPER ATION Select a Band Press the B button (19) on the control panel (or the BND button on the remote control) to change between three FM bands and one AM band.
JCD3006 8 CD OPERATION Insert and Eject Disc Insert a disc, label-side up, with the unit turned on. “S-CDP” will display on the LCD for about 2 seconds and the unit will play the first track on t he disc. Press the e ject button (2) to stop disc play and eject the disc.
JCD3006 9 SPECIFICATIONS CD Signal to Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 70dB Sampling Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JCD3006 10 ASA Electronics Corporation www .asaelectr onics.com © 2006 ASA Electronics Corporation v .071206.
An important point after buying a device Jensen JCD3006 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen JCD3006 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen JCD3006 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen JCD3006 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen JCD3006 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen JCD3006, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen JCD3006.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen JCD3006. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen JCD3006 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
