Instruction/ maintenance manual of the product 420 Amtrol
Go to page of 8
This handbook will discuss the basic sizing used for our larger Well-X-Trol ® s such as WX-400, 420, 44 0, and 450 series. This allows you to use the Well- X-Trol ® “principle of separation of air and water” on larger jobs that are beyond the typical residential range.
-2- Utilizing the Maximum Capacity of Full Acceptance Well-X-Trol ® s Series 400, 420, 440 and 450 When used with conventional pressure ranges, these Well-X-Trol models use only a fraction of their maximum capacity. For Example: A WX-423 with a total volume of (275) gallons will accept the following: at 30/50 – (85) gallons or 30.
-3- For example, if we look at a typical pump curve for a ( 15) HP – (85) GPM submersible pump – we can sel ect a pump cut-in and cut-out point on the curve which will provide optimum pump operation. The pump curve shows pump performance as it s pressure rises from cut-off ( ( 0 ) head in test) to maximum head in feet.
Subtracting the feet of head required for lift (240 ′ ) we can convert this point to PSIG: Maximum pump cut-out = 420 feet Less lift = 240 feet Maximum pressure = 180 feet To convert feet of head to PSIG, we divide by (2.31) (there is (2.31) feet of head for each PSI): 180 ÷ 2.
-5- Step Three: Calculate Acceptance Factor (AF) Remember our formula for calculating the acceptance factor (AF) for diaphragm tanks? Step Four: Maximum Acceptance Factor Verification After calculating the acceptance factor (AF), we must compare the value to the maximum acceptance factors shown in Table 1.
-6- NOTES.
-7- NOTES.
Part #: 9017-102 (04/11) MC# 10005 AMTROL, AMTROL logo and WELL-X-TROL are registered trademarks of AMTROL Inc. and afliates in the U.S. and elsewhere. All rights reserved. 1400 Division Road, West W arwick, RI 02893 T : 401.884.6300 F: 401.885.2567 www .
An important point after buying a device Amtrol 420 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Amtrol 420 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Amtrol 420 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Amtrol 420 you will learn all the available features of the product, as well as information on its operation. The information that you get Amtrol 420 will certainly help you make a decision on the purchase.
If you already are a holder of Amtrol 420, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Amtrol 420.
However, one of the most important roles played by the user manual is to help in solving problems with Amtrol 420. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Amtrol 420 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
