Instruction/ maintenance manual of the product 200-l Amtrol
Go to page of 2
EXTR OL ® L SERIES REPLACEMENT BLADDER INSTRUCTIONS PLUG AIR V AL VE DOME Figure 1 DRAIN PLUG ST AND DOME Figure 2 MARK Figure 3 DIP TUBE Figure 4 READ CAREFULLY THE EXTROL REPLACEMENT BLADDER INSTRUCTIONS TO AVOID SERIOUS PERSONAL INJURY AND PROPERTY HAZARDS AND TO ENSURE SAFE USE AND PROPER CARE OF THIS PRODUCT.
© 2014 AMTROL Inc. Part #: 9017-099 (01/14) 11. Pump out water remaining in very bottom of tank. 12. Wash down inside walls of tank as necessary. 13. Mop up remaining water. 14. Dry out inside of tank (reversed vacuum cleaner or air line from a compressor).
An important point after buying a device Amtrol 200-l (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Amtrol 200-l yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Amtrol 200-l - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Amtrol 200-l you will learn all the available features of the product, as well as information on its operation. The information that you get Amtrol 200-l will certainly help you make a decision on the purchase.
If you already are a holder of Amtrol 200-l, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Amtrol 200-l.
However, one of the most important roles played by the user manual is to help in solving problems with Amtrol 200-l. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Amtrol 200-l along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
