Instruction/ maintenance manual of the product Patriot (2013) Jeep
Go to page of 66
.
.
.
.
.
INTRODUCTION Congratulations on selecting your new Chrysler Gr oup LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that ar e traditional to our vehicles.
control. Failur e to operate this vehicle safely may r esult in a collision, r ollover of the vehicle, and severe or fatal injury . Drive car efully . Failure to use the driver and passenger seat belts pr o- vided is a major cause of sever e or fatal injury .
6 INTRODUCTION.
W ARNINGS AND CAUTIONS This Owners Manual contains W ARNINGS against op- erating procedures that could result in a collision or bodily injury . It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not r ead this entir e Owners Manual, you may miss important information.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
W ARNING! • For personal security and safety in the event of an collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • Before exiting a vehicle, always apply the parking brake, shift the transmission into P ARK, and re- move the Key Fob from the ignition.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1. Remove the mini-latch and regular latch from its stowed position in the right r ear side trim panel. 2. Grasp the mini-latch plate and pull the belt over the seat.
6. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 7. Position the lap belt across your thighs, below your abdomen. T o r emove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, pull on the lap belt.
8. Position the shoulder belt on your chest so that it is comfortable and not r esting on your neck. The r etrac- tor will withdraw any slack in the belt.
3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing.
Automatic Locking Retractor Mode (ALR) — If Equipped In this mode, the shoulder belt is automatically pre-locked. The belt will still r etract to remove any slack in the shoulder belt. The Automatic Locking Mode is available on all passenger-seating positions with a combination lap/ shoulder belt.
Energy Management Feature This vehicle has a safety belt system with an Energy Management featur e in the fr ont seating positions to help further reduce the risk of injury in the event of a head-on collision. This safety belt system has a r etractor assembly that is designed to release webbing in a controlled manner .
the Active Head Restraints (AHR) to deploy . If a rear impact requires deployment, both the driver and fr ont passenger seat AHRs will be deployed. When AHRs deploy during a r ear impact, the front half of the head r estraint extends forwar d to minimize the gap between the back of the occupant’s head and the AHR.
CAUTION! All occupants, including the driver , should not oper - ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
3. Pull down then rearward towards the r ear of the vehicle then down to engage the locking mechanism. 4. The AHR fr ont soft foam and trim half should lock into the back decorative plastic half.
NOTE: • If you have dif ficulties or pr oblems r esetting the Active Head Restraints, see an authorized dealer . • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer .
unbuckled while traveling at speeds greater than 5 mph (8 km/h), BeltAlert will pr ovide both audio and visual notification. The fr ont passenger seat BeltAlert is not active when the front passenger seat is unoccupied.
Seat Belts And Pregnant W omen W e recommend that pregnant women use the seat belts throughout their pregnancy . Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug acr oss the hips as possible.
The Advanced Fr ont Air Bags have a multistage inflator design. This allows the air bag to have dif ferent rates of inflation that are based on the severity and type of collision.
• Instrument Panel • Knee Impact Bolster • Driver Advanced Front Air Bag • Passenger Advanced Front Air Bag • Supplemental Seat-Mounted Side Air Bags (SAB) • Supplemental Side Air Bag Infl.
W ARNING! (Continued) • Do not drill, cut or tamper with the knee bolster in any way . • Do not mount any accessories to the knee bolster such as alarm lights, stereos, citizen band radios, etc.
An important point after buying a device Jeep Patriot (2013) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jeep Patriot (2013) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jeep Patriot (2013) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jeep Patriot (2013) you will learn all the available features of the product, as well as information on its operation. The information that you get Jeep Patriot (2013) will certainly help you make a decision on the purchase.
If you already are a holder of Jeep Patriot (2013), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jeep Patriot (2013).
However, one of the most important roles played by the user manual is to help in solving problems with Jeep Patriot (2013). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jeep Patriot (2013) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
