Instruction/ maintenance manual of the product Compass (2010) Jeep
Go to page of 473
Compass O W N E R ’ S M A N U A L 2 0 1 0 I n f o r m a t i o n P r o v i d e d b y :.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............
I n f o r m a t i o n P r o v i d e d b y :.
INTRODUCTION CONTENTS 䡵 Intr oduction ........................... 4 䡵 Rollover W arning ....................... 4 䡵 How T o Use This Manual .................. 5 䡵 W arnings And Cautions ................... 7 䡵 V ehicle Identification Number .
INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
control. Failure to operate this vehicle safely may result in an accident, rollover of the vehicle, and severe or fatal injury . Drive carefully . Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury . In fact, the U.
6 INTRODUCTION I n f o r m a t i o n P r o v i d e d b y :.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ Ignition Key Removal .................. 1 2 ▫ Locking Doors W ith A Key .............. 1 5 ▫ Key-In-Ignition Reminder ............... 1 5 䡵 Sentry Key 威 .
▫ T o Lock The Doors And Liftgate .......... 2 1 ▫ Sound Horn W ith Remote Key Lock ........ 2 1 ▫ Flash Lights W ith Remote Key Lock/Unlock . . 22 ▫ Using The Panic Alarm ................. 2 3 ▫ Programming Additional T ransmitters ...... 2 3 ▫ General Information .
▫ Automatic Locking Retractors (ALR) Mode — If Equipped ................... 4 8 ▫ Seat Belt Pretensioners — If Equipped ...... 4 9 ▫ Supplemental Rear Impact Active Head Restraints (AHR) ...................... 4 9 ▫ Enhanced Seat Belt Use Reminder System (BeltAlert 威 ) .
A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a safe place.
NOTE: If you try to r emove the key befor e you place the shift lever in P ARK, the key may become trapped tem- porarily in the ignition switch cylinder .
CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Manual T ransmission — If Equipped 1. T urn the ignition switch to the ACC (Accessory) position.
Locking Doors With A Key Y ou can insert the key with either side up. T o lock the door , turn the key to the right. T o unlock the door , turn the key to the left. Refer to “Maintenance Procedures” in “Maintaining Y our V ehicle” for further information.
If the V ehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 sec- onds), it indicates that there is a fault in the electronics. Should this occur , have the vehicle serviced as soon as possible by an authorized dealer .
Customer Key Programming If you have two valid Sentry Keys 威 , you can program new Sentry Keys 威 to the system by performing the following procedur e: 1. Cut the additional Sentry Key 威 T ransponder blank(s) to match the ignition switch lock cylinder key code.
repr ogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be repr ogrammed. General Information The Sentry Key 威 system complies with FCC rules Part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference.
disarm. After approximately 16 seconds, the V ehicle Security Light will flash slowly . This shows that the V ehicle Security Alarm is fully armed. T o Disarm The System Press UNLOCK on the RKE transmitter , or insert the key into the ignition switch and turn the ignition switch to the ON position.
T o Unlock The Doors And Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver ’s door , or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to acknowledge the unlock signal.
Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the V ehicle Security Alarm. Illuminated Approach — If Equipped This feature activates the headlights for up to 90 seconds when the doors are unlocked with the RKE transmitter .
3. T est the feature while outside of the vehicle by press- ing the LOCK button on the RKE transmitter with the ignition switch in the LOCK position and the key re- moved. 4. Repeat these steps if you want to return this feature to its previous setting.
3. T est the feature while outside of the vehicle by press- ing the LOCK/UNLOCK buttons on the RKE transmitter with the ignition switch in the LOCK position and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting.
2. This device must accept any interference that may be received including interference that may cause undesired operation. NOTE: Changes or modifications not expressly ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o reassemble the RKE transmitter case, snap the two halves together .
W ARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Mon- oxide (CO) which is odorless and colorless. Car- bon Monoxide is poisonous and can cause serious injury or death when inhaled. • Keep Remote Keyless Entry (RKE) transmitters away from children.
Remote start will also cancel if any of the following occur: • The engine stalls or RPM exceeds 2500 • Any engine warning lamps come on • The hood is opened • The hazard switch is pressed • .
DOOR LOCKS Manual Door Locks Use the manual door lock plunger to lock the doors from inside the vehicle. If the plunger is down when the door is closed, the door will lock.
Power Door Locks A power door lock switch is located on the driver’s door panel. Press this switch to lock or unlock the doors and liftgate. NOTE: T o prevent from locking the key in the vehicle, the power door lock switch will not operate when the key is in the ignition and either front door is open.
2. The transmission is in gear . 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mph (24 km/h). 6. The doors wer e not pr eviously locked using the power door lock switch or Remote Keyless Entry (RKE) transmitter .
NOTE: • If you do not hear the chime it means that the system did not enter the programming mode and you will need to repeat the procedure. • Use the Automatic Door Locks feature in accordance with local laws. Automatic Unlock Doors on Exit The doors will unlock automatically if: 1.
4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this feature to its previous setting. NOTE: • If you do not hear the chime it means that the system did not enter the programming mode and you will need to repeat the procedure.
W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window and open the door with the outside door handle.
• For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 min- utes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time for this feature is programmable.
Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on the other doors. T o disable the window contr ols on the other doors, press the window LOCKOUT switch. T o enable the window con- trols, press the window LOCKOUT switch a second time.
Once unlocked, the liftgate can be opened or closed without using the key . T o open the liftgate, squeeze the liftgate release and pull the liftgate open with one fluid motion.
W ARNING! (Continued) • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode. Gas props support the liftgate in the open position.
all the way out and then adjusting the belt to the desired length to restrain a child seat or secure a large item in a seat — if equipped If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and T ether for CHildren (LA TCH) feature also can be used to hold infant and child restraint systems.
ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All the seats in your vehicle are equipped with Lap/ Shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or collisions.
W ARNING! (Continued) • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too.
W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well.
W ARNING! (Continued) • A belt that is worn under your arm is very danger- ous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones.
W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt can’t do its job as well.
Adjustable Upper Shoulder Belt Anchorage In the front seat, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Push the anchorage button to r elease the anchorage, and move it up or down to the position that fits you best.
In the rear seat, move toward the center of the seat to position the belt away from your neck. Second Row Center Lap/Shoulder Belt Operating Instructions The second row center lap/shoulder belt features a three-point seat belt with a mini-latch and buckle, which allows the shoulder belt to detach from the lower anchor when the seat is folded.
3. Route the shoulder belt to the inside of the right head restraint. 4. When the belt is long enough to fit, insert the mini- latch plate into the mini-buckle until you hear a “click.” 5. Sit back in the seat. Slide the regular latch plate up the webbing as far as necessary to allow the belt to go around your lap.
7. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, pull on the lap belt. A snug belt r educes the risk of sliding under the belt in a collision.
button on the top of the mini-buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . Insert the mini-latch plate into the slot provided in the trim panel.
2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound.
How the Active Head Restraints (AHR) W ork The Occupant Restraint Controller (ORC) determines whether the severity or type of rear impact require the Active Head Restraints (AHR) to deploy . In case of AHR deployment both driver and front passenger seat AHR’s will be deployed.
CAUTION! All occupants, including the driver , should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident.
3. Pull down then rearward towar ds the rear of the vehicle then down to engage the locking mechanism. 4. The AHR front soft foam and trim half should lock into the back decorative plastic half.
NOTE: • If you have difficulties or problems resetting the head restraints, see an authorized dealer . • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer .
BeltAlert 威 Programming BeltAlert 威 can be enabled or disabled by your authorized dealer or by performing the following procedur e: NOTE: The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or ST AR T position.
Seat Belt Extender If a seat belt is too short, even when fully extended, and when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized dealer can provide you with a seat belt extender . This extender should be used only if the existing belt is not long enough.
Supplemental Restraint System (SRS) - Airbags This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the center of the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove compartment.
This vehicle is equipped with Supplemental Side Airbag Inflatable Curtains (SABIC) to protect the driver , front, and rear passengers sitting next to a window . The SABIC are located above the side windows. The trim covering the side airbags is labeled SRS AIRBAG.
Advanced Front Airbag Features The Advanced Fr ont Airbag system has multistage driver and fr ont passenger airbags. This system provides output appropriate to the severity and type of collision as determined by the Occupant Restraint Controller (ORC), which may receive information from the impact sensors at the front of the car .
Supplemental Side Seat Airbags — If Equipped Supplemental side seat airbags provide enhanced protec- tion and work together with supplemental Side Airbag Inflatable Curtains (SABIC) to help protect an occupant during a side impact. The supplemental side seat airbag is marked with an airbag label sewn into the outboard side of the seat.
Supplemental Side Airbag Inflatable Curtain (SABIC) SABIC airbags offer side-impact and vehicle r ollover protection to front and rear seat outboard occupants in addition to that provided by the body structure.
The system includes sensors adjacent to both front and rear seat occupants that ar e calibrated to deploy the SABIC airbags during impacts that require airbag occu- pant protection.
W ARNING! Infants in rear facing child restraints should NEVER ride in the front seat of a vehicle with a passenger front airbag. An airbag deployment can cause severe injury or death to infants in that position.
W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions, the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
The Advanced Fr ont Airbags will not deploy in all frontal collisions, including some that may produce substantial vehicle damage — for example, some pole collisions, truck underrides, and angle of fset collisions.
It also includes diagnostics that will illuminate the instru- ment cluster Airbag W arning Light if a malfunction is noted. The diagnostics also recor d the nature of the malfunction. W ARNING! Ignoring the Airbag W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision.
The ORC determines if a side collision requir es the side airbags to inflate based on the severity and type of collision. The ORC monitors the r eadiness of the electronic parts of the system whenever the ignition switch is in the ST AR T or ON positions.
Because airbag sensors estimate deceleration over time, vehicle speed and damage are not good indicators of whether or not an airbag should have deployed. NOTE: In a rollover the pretensioners and/or SABIC airbags may deploy on both sides of the vehicle.
If you do have a collision, which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abra- sions and/or skin reddening to the driver and front passenger as the airbags deploy and unfold.
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you.
Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system immediately .
2. Under certain circumstances, EDR data may not be recor ded (e.g., loss of battery power). In conjunction with other data gathered during a com- plete accident investigation, the electronic data may.
3. Requested by police under a legal warrant. 4. Otherwise required by law . Data parameters that are recorded: • Diagnostic tr ouble code(s) and warning light status for electronically-contr olled .
Infants and Child Restraints There are differ ent sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt. Always check the child seat owner’s manual to ensure you have the correct seat for your child.
in the vehicle by the lap/shoulder belt or the LA TCH child restraint anchorage system. Refer to ⬙ LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CHildren) ⬙ .
that you can install the child restraint in the vehicle where you will use it, before you buy it. • The restraint must be appropriate for your child’s weight and height. Check the label on the restraint for weight and height limits. • Carefully follow the instructions that come with the restraint.
Any seat belt system will loosen with time, so check the belt occasionally , and pull it tight if necessary . • In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint.
have lower anchorages that are capable of accommodat- ing LA TCH-compatible child seats having flexible, webbing-mounted lower attachments. Child seats with fixed lower attachments must be installed in the out- board positions only .
provide add-on tether strap kits for some of their older products. T ether anchorage kits are also available for most older vehicles. Because the lower anchorages are to be introduced to passenger car.
In general, you will first loosen the adjusters on the lower and tether straps so that you can attach the hook or connector to the lower and tether anchorages more easily . The tether strap should be routed over the center of the head r estraint and attached to the tether anchor on the r ear of the seatback.
T ransporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in a collision. Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts.
SAFETY TIPS T ransporting Passengers NEVER TRANSPORT P ASSENGERS IN THE CARGO AREA. W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed.
If you are requir ed to drive with the trunk/liftgate open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed. DO NOT use the recir culation mode. The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system.
Defroster Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield.
I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 8 9 ▫ Inside Day/Night Mirror ................ 8 9 ▫ Automatic Dimming Mirror — If Equipped . . . 89 ▫ Outside Mirror — Driver Side ............
䡵 V oice Command — If Equipped ........... 1 2 1 ▫ V oice Command System Operation ........ 1 2 1 ▫ Commands ........................ 1 2 3 ▫ V oice T raining ...................... 1 2 6 䡵 Seats .............................. 1 2 6 ▫ Front Seat Adjustment .
▫ Flash-T o-Pass ....................... 1 4 3 ▫ Map/Reading Lights .................. 1 4 4 䡵 W indshield W ipers And W ashers .......... 1 4 4 ▫ W indshield W iper Operation ............ 1 4 5 ▫ Intermittent W iper System .............. 1 4 6 ▫ W indshield W ashers .
▫ Opening The Sunroof ................. 1 5 9 ▫ Closing The Sunroof .................. 1 5 9 ▫ Pinch Protect Feature ................. 1 6 0 ▫ Pinch Protect Override ................ 1 6 0 ▫ V enting Sunroof — Express ............. 1 6 0 ▫ Sunshade Operation .
MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirr or to center on the view through the rear window . Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicle).
CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean.
Power Mirrors The control for the power mirrors is located on the driver’s door trim panel. T o adjust a mirror , turn the control wand toward the left or right mirror positions indicated. T ilt the control wand in the direction you want the mirror to move.
W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in this convex mirror .
Uconnect™ Phone — IF EQUIPPED Uconnect™ Phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect™ Phone al- lows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”W ork ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ).
linked (or paired) cellular phone can be used with the system at a time. The system is available in English, Spanish, or French languages. W ARNING! Any voice commanded system should be used only in safe driving conditions following local laws and phone use.
The radio display will be used for visual prompts from the Uconnect™ Phone such as ⬙ CELL ⬙ or caller ID on certain radios. Operation V oice commands can be used to operate the Uconnect™ Phone and to navigate through the Uconnect™ Phone menu structure.
T o activate the Uconnect™ Phone from idle, simply pr ess the button and follow the audible prompts for directions. All Uconnect™ Phone sessions begin with a press of the button on the radio control head. Cancel Command At any prompt, after the beep, you can say ⬙ Cancel ⬙ and you will be returned to the main menu.
• Y ou will then be asked to give your cellular phone a priority level between one and seven, with one being the highest priority . Y ou can pair up to seven cellular phones to your Uconnect™ Phone. However , at any given time, only one cellular phone can be in use, connected to your Uconnect™ Phone.
or downloaded phonebook. T o learn how to store a name in the phonebook, refer to ⬙ Add Names to Y our Uconnect™ Phonebook, ⬙ in the phonebook. • The Uconnect™ system will confirm the name and then dial the corr esponding phone number , which may appear in the display of certain radios.
Phonebook Download – Automatic Phonebook T ransfer From Cellular Phone If equipped and specifically supported by your phone, Uconnect™ Phone automatically downloads names (text names) and number entries from the cellular phone’s phonebook. Specific Bluetooth 威 Phones with Phone Book Access Profile may support this feature.
Phonebook Download — Single Entry If equipped and supported by your phone, Uconnect™ Phone allows the user to download entries from their phone via Bluetooth 威 .
• Y ou will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose the number designation (home, work, cellular , or pager) that you wish to edit. • When prompted, recite the new phone number for the phonebook entry that you are editing.
• After you enter the name, the Uconnect™ Phone will ask you which designation you wish to delete: home, work, cellular , pager , or all. Say the designation you wish to delete. • Note that only the phonebook entry in the current language is deleted.
• The Uconnect™ Phone will then prompt you as to the number designation you wish to call. • The selected number will be dialed. Phone Call Features The following features can be accessed through the Uconnect™ Phone if the feature(s) are available on your cellular service plan.
by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progress. T o go back to the first call, refer to ⬙ T oggling Between Calls ⬙ in this section. T o combine two calls, refer to ⬙ Conference Call ⬙ in this section.
Call T ermination T o end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically .
Uconnect™ Phone Features Language Selection T o change the language that the Uconnect™ Phone is using: • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say the name of the language you wish to switch to English, Espanol, or Francais.
Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area. • If supported, this number may be programmable on some systems. T o do this, press the button and say ‘Setup’, followed by ‘Emergency’.
Paging T o learn how to page, refer to ⬙ W orking with Automated Systems. ⬙ Paging works properly except for pagers of certain companies, which time out a little too soon to work properly with the Uconnect™ Phone. V oice Mail Calling T o learn how to access your voice mail, refer to ⬙ W orking with Automated Systems.
The Uconnect™ Phone will then send the corresponding phone number associated with the phonebook entry , as tones over the phone. NOTE: • Y ou may not hear all of the tones due to cellular phone network configurations.
Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the Uconnect™ Phone (while dialing via the cellular phone keypad, the user must exercise caution and take precautionary safety measures).
from your Uconnect™ Phone pair ed cellular phone to the Uconnect™ Phone or vice versa, press the button and say ⬙ T ransfer Call. ⬙ Connect or Disconnect Link Between the Uconnect™ Phone and.
• The selected phone will be used for the next phone call. If the selected phone is not available, the Uconnect™ Phone will return to using the highest priority phone present in or near (approximately within 30 ft (9 m)) the vehicle. Delete Uconnect™ Phone Paired Cellular Phones • Press the button to begin.
Repeat the words and phrases when prompted by the Uconnect™ Phone. For best results, the V oice T raining session should be completed when the vehicle is parked with the engine running, all windows closed, and the blower fan switched off. This procedur e may be repeated with a new user .
• When navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say ⬙ Send. ⬙ • Storing names in the phonebook when the vehicle is not in motion is recommended. • It is not recommended to store similar sounding names in the Uconnect™ Phonebook.
• Performance, such as audio clarity , echo, and loudness to a large degree rely on the phone and network, and not the Uconnect™ Phone. • Echo at the phone far end can sometimes be reduced by lowering the in-vehicle audio volume. • In a convertible vehicle, system performance may be compromised with the convertible top down.
1 16 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 17 I n f o r m a t i o n P r o v i d e d b y :.
1 18 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompt.
V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oic.
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the V oice Command button, listen for the beep, and say your command. Pressing the V oice Command button while the system is speaking is known as “barging in.
Commands The V oice Command system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pr essing the V oice Command button.
Radio FM T o switch to the FM band, say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the frequency) • “Next Station” (to select th.
Memo T o switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: • “New Memo” (to recor d a new memo) — During the recor ding, you may press the V oice Command button to stop r ecording.
NOTE: Keep in mind that you have to press the V oice Command button first and wait for the beep before speaking the “Barge In” commands. V oice T raining For users experiencing difficulty with the system recog- nizing their voice commands or numbers the Uconnect™ V oice “V oice T raining” feature may be used.
desired. Then, using body pressur e, move forward and rearwar d on the seat to be sure that the seat adjusters have latched. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control.
Manual Seat Height Adjustment — If Equipped The driver’s seat height can be raised or lowered by using the handle on the outboard side of the seat to adjust the driving position. Manual Lumbar — If Equipped The lumbar adjustment handle is located on the outboard side of the driver’s seat.
Driver’s Seatback Recline T o recline the seatback, lean forward before lifting the handle, then lean back to the desired position and release the handle. Lift the handle to return the seatback to an upright position. W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
Six-W ay Power Seats — If Equipped The power seat switch is located on the outboard side of the seat near the floor . Use the switch to move the seat up, down, forward, rearward, or to tilt the seat. W ARNING! Adjusting a seat while the vehicle is moving is dangerous.
Heated Seats — If Equipped This feature heats the front driver and passenger seats. The heaters provide the same heat level for both the seat cushion and the seatback. The contr ols for the fr ont heated seats are located on the center instrument panel area.
W ARNING! (Continued) • Do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat.
Adjusting Active Head Restraints Active Head Restraints can reduce the risk of injury in the event of a rear impact. The Active Head Restraint should be adjusted so the top of the head restraint is located above the top of your ear .
T o raise the head restraint, pull upward on the head restraint (on some models, you may need to press the push button). T o lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head restraint.
NOTE: • The head restraints should only be removed by quali- fied technicians, for service purposes only . If either of the head restraints requir e removal, see your autho- rized dealer .
W ARNING! (Continued) • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the operation of the Active Head Restraint in the event of an accident and could result in serious injury or death.
T o raise the seatback, pull the strap forward and lift the seatback into its upright position. W ARNING! Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers.
W ARNING! • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only with the vehicle is parked.
Lift the hood prop rod, clipped to the right side (left side facing hood) of the engine compartment to secure the hood in the open position. Place the hood prop at the location stamped into the inner hood surface. CAUTION! T o prevent possible damage, do not slam the hood to close it.
LIGHTS Multifunction Lever The multifunction lever contr ols the operation of the headlights, parking lights, turn signals, headlight beam selection, instrument panel light dimming, interior lights, the passing lights and the fog lights. The multifunction lever is located on the left side of the steering column.
Instrument Panel Dimming Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened.
Fog Lights — If Equipped The front fog light switch is on the multifunction lever . T o activate the front fog lights, turn on the parking lights or the low beam headlights and pull out the end of the multifunction lever . NOTE: The fog lights will only operate with the head- lights on low beam.
NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective.
Map/Reading Lights These lights are mounted between the sun visors above the rear view mirror . Each light is turned on by pressing the button. Press the button a second time to turn the light off. The lights also come on when a door is opened or the dimmer control is turned fully upward, past the second detent.
Windshield Wiper Operation Rotate the end of the lever upward to the LO position for low-speed wiper operation. Rotate the end of the lever upward to the HI position for high-speed wiper operation.
Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Select the delay interval by turning the end of the lever . Rotate the end of the lever upward (clockwise) to decrease the delay time and downward (counter clockwise) to increase the delay time.
Mist Feature Push down on the control lever to activate a single wipe to clear the windshield of road mist or spray from a passing vehicle. As long as the lever is held down, the wipers will continue to operate.
Push down on the lever to unlock the steering column. W ith one hand firmly on the steering wheel, move the steering column up or down, as desired. Push the lever up to lock the steering column firmly in place. W ARNING! Do not adjust the steering column while driving.
NOTE: In order to ensure proper operation, the Elec- tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated simultaneously . If this occurs, the Electronic Speed Con- trol System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.
T o Set a Desired Speed When the vehicle has reached the desired speed, press down on the lever and release. Release the accelerator and the vehicle will operate at the selected speed. NOTE: The vehicle should be traveling at a steady speed and on level ground before pressing the SET lever .
T apping the SET DECEL lever once will result i na1m p h (1.6 km/h) speed decrease. Each time the lever is tapped, speed decreases. Manual T ransaxle Pressing the clutch pedal will disengage the Electronic Speed Control. A slight incr ease in engine RPM before the speed control disengages is normal.
On steep hills a greater speed loss or gain may occur so it may be preferable to drive without Electronic Speed Control. W ARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Y our ve- hicle could go too fast for the conditions, and you could lose control.
W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards.
Place the handheld transmitter 1–3 in (3-8 cm) away fr om the HomeLink 威 button you wish to program while keeping the indicator light in view . 3. Simultaneously pr ess and hold both the chosen Ho.
This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open and close the door). 6. Firmly press and release the LEARN or TRAINING button. The name and color of the button may vary by manufacturer .
Gate Operator/Canadian Programming Canadian radio-frequency laws requir e transmitter sig- nals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink 威 to pick up the signal during programming.
Reprogramming A Single HomeLink 姞 Button T o r eprogram a channel that has been previously trained, follow these steps: 1. T urn the ignition switch to the ON/RUN position. 2. Press and hold the desired HomeLink 威 button until the indicator light begins to flash after 20 seconds.
General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interference that may cause undesired operation.
W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
stop the movement and the sunroof will remain in a partial close condition until the switch is pushed and held forward again. T o ensure sunroof is fully closed, press and hold switch until sunroof has completely stopped moving. Express Mode Press the switch forward and release, and the sunroof will close automatically from any position.
Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
Power is available when the ignition switch is in the ON or ACC position. Insert the cigar lighter or accessory plug into the outlet for use. T o preserve the heating element, do not hold the lighter in the heating position. NOTE: • T o ensur e proper operation a MOP AR 威 knob and element must be used.
CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting.
manually , unplug the device and plug it in again. T o avoid overloading the circuit, check the power ratings on electrical devices prior to using the inverter . W ARNING! T o avoid serious injury or death: • Do not use a three-prong adaptor . • Do not insert any objects into the receptacles.
CAUTION! (Continued) • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade the battery even more quickly .
There are two cupholders located in the back for the rear passengers. STORAGE Glove Compartment And Storage Bin Located on the passenger side of the instrument panel are an upper storage bin and a lower glove compartment.
T o open the lower glove compartment, pull outward on the release handle. Door Storage The interior door panels are equipped with lower storage areas. Glove Compartment Front Door Storage 3 UNDERST AN.
CONSOLE FEA TURES The floor console contains both an upper and lower storage compartment. T o open the upper storage compartment, push inwar d on the upper handle to unlatch the upper lid and lift the lid open. T o open the lower storage compartment, lift upward on the lower handle to unlatch the lower storage compart- ment and lift the lid open.
W ARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injury .
Press in on the flashlight to release it. T o operate the flashlight, press the switch once for high, twice for low , and a third time to return to off. Cargo Cover The cargo area trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining rear seat.
T o install the Cargo Cover , insert either end of the cover into one of the two notches located in the rear trim panels. W ith one of the cover ends installed, push inward on the opposite end and install it into the same notch location of the rear trim panel.
W ARNING! In an accident a cargo cover loose in the vehicle could cause injury . It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compart- ment. Remove the cover from the vehicle when taken from its mounting.
Cargo Tie-Down Loops There are four D-rings installed in the cargo area for securing cargo. W ARNING! • Cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose.
W ARNING! (Continued) • Place as much cargo as possible in front of the rear axle. T oo much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway . • Do not pile luggage or cargo higher than the top of the seatback.
Rotate the center portion of the lever upward to the “On” position to activate the rear wiper . NOTE: The rear wiper operates in an intermittent mode only . Rotate the center portion of the lever past the first detent to activate that rear washer .
turns off after approximately 10 minutes. For an addi- tional five minutes of operation, press the button a second time. NOTE: T o prevent excessive battery drain, use the rear window defroster only when the engine is operating.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Features ............... 1 8 1 䡵 Instrument Cluster .................... 1 8 2 䡵 Instrument Cluster Descriptions ........... 1 8 3 䡵 Electronic V ehicle Information Center (EVIC) — If Equipped .
▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play , DVD-V ideo) . . . 214 ▫ Notes On Playing MP3/WMA Files ....... 2 1 6 ▫ List Button (Disc Mode For MP3/WMA Play) ......... 2 1 9 ▫ Info Button (Disc Mode For MP3/WMA Play) ..
▫ Notes On Playing MP3 Files ............ 2 4 3 ▫ List Button (CD Mode For MP3 Play) ...... 2 4 5 ▫ Info Button (CD Mode For MP3 Play) ...... 2 4 6 䡵 Universal Consumer Interface (UCI) — If Equipped .......................... 2 4 7 ▫ Connecting The iPod 威 .
▫ Operating Instructions — V ideo Entertainment System (VES)™ (If Equipped) ................. 2 5 7 䡵 Remote Sound System Controls — If Equipped .......................... 2 5 7 ▫ Radio Operation ..................... 2 5 8 ▫ CD Player .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 5 — Storage Bin 9 — Heated Seat Switch – If Equipped 2 — Demisters 6 — Glove Compartment 10 — Hazard W arning Flasher 3 — Instrument Cluster .
INSTRUMENT CLUSTER 182 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge / Fuel Door Reminder When the ignition switch is in the ON position, the pointer will show the level of fuel remain- ing in the fuel tank. The fuel pump symbol points to the side of the vehicle where the fuel door is located.
briefly as a bulb check. If the light does not come on during starting, have the system checked by an autho- rized dealer . 4. Oil Pressure W arning Light This light indicates low engine oil pressure. The light should turn on momentarily when the engine is started.
continuous chime will sound to alert you to turn the signals of f. If either indicator flashes at a rapid rate, check for a defective outside light bulb.
12. T achometer The white area of the scale shows the permissible engine revolutions-per -minute (RPM x 1000) for each gear range. Before reaching the red area, ease up on the accelerator to prevent engine damage. 13. Engine T emperatur e W arning Light This light warns of an overheated engine condi- tion.
booster , the ABS pump will run when applying the brake and a brake pedal pulsation may be felt during each stop. The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic system.
The light also will turn on when the parking brake is applied with the ignition switch in the ON position. NOTE: This light shows only that the parking brake is applied.
17. T emperatur e Gauge The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily . The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer .
20. Shift Lever Indicator The Shift Lever Indicator is self-contained within the instrument cluster . It displays the gear position of the automatic transmission.
maintain correct tire pressur e, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly .
23. Odometer / T rip Odometer Display Area This display indicates the total distance the vehicle has been driven. NOTE: U.S. Federal regulations requir e that upon trans- fer of vehicle ownership, the seller certify to the pur- chaser the correct mileage that the vehicle has been driven.
area. T ighten the fuel filler cap properly and press the TRIP ODOMETER button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL).
24. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of an Onboard Diagnostic system called OBD II that monitors emissions, engine, and automatic trans- mission control systems. The light will illuminate when the key is in the ON/RUN position before engine start.
25. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog lights are on. 26. Electronic Stability Control (ESC) OFF Indicator Light — If Equipped This light indicates the Electr onic Stability Con- trol system (ESC) has been turned off by the driver .
When lit solid: There is an 4WD system fault. 4WD performance will be at a reduced level. Service the 4WD system soon. When blinking: The 4WD system is temporarily dis- abled due to overload condition.
The EVIC consists of the following: • System status • V ehicle information warning message displays • Personal Settings (Customer-Pr ogrammable Features) • Compass heading • Outside temperat.
• Gate Ajar (with a single chime) • Headlamps or Park Lamps On • Key In Ignition • Check TPM System Engine Oil Change Indicator System — If Equipped Oil Change Required Y our vehicle is equipped with an engine oil change indicator system.
EVIC Functions Press the EVIC button until one of the following func- tions is displayed on the EVIC: • Compass/T emperatur e/Audio • A verage Fuel Economy • Distance T o Empty (DTE) • Elapsed.
Compass/T emperature/Audio Press and release the EVIC button to display one of eight compass headings to indicate the direction the vehicle is facing, the outside temperature, and the current radio station. For additional information regarding the compass, refer to Personal Settings (Customer-Pr ogrammable Features).
Elapsed Time Shows the total elapsed time of travel since the last reset when the ignition switch is in the ACC position. Elapsed time will increment when the ignition switch is in the ON or ST AR T position.
position (automatic transmission). Press and hold the EVIC button when in this display until “ON” or “OFF” appears to make your selection. RKE Unlock Driver’s Door 1st When Driver’s Door 1.
power outlets will remain active for up to 10 minutes after the ignition switch has been turned OFF . Opening a vehicle door will cancel this feature. Press and hold the EVIC button when in this display until “OFF”, “45 sec.”, “5 min.”, or “10 min.
large metal or metallic objects) until the “CAL” message displayed in the EVIC turns off. The compass will now function normally . NOTE: A good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, undergr ound cables, railroad tracks, etc.
button several times until you have displayed the Per- sonal Settings (Customer -Programmable Features) menu. Once in the Personal Settings (Customer-Programmable Features) menu, press and release (less than one second) the EVIC button several times until “Compass V ariance” is displayed.
indicator will come on continuously in the EVIC display to indicate that the compass is now in the calibration mode, and that the vehicle can now be driven to calibrate.
Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith Uconnect” message will display on the radio screen. TIME Button Press the TIME button to alternate locations of the time and frequency display .
Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decrease the bass tones. Push the rotary TUNE/SCROLL control knob a second time and MID will display .
T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or undefined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls R.
station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radio will tune to the preset station.
NOTE: • The available selections for each of the above entries varies depending upon the disc. • These selections can only be made while playing a DVD. • VES™ Power - Allows you to turn VES™ ON and OFF (if equipped). • VES™ Lock - Locks out rear VES™ remote controls (if equipped).
down and selecting ⬙ other . ⬙ Enter the country code using the TUNE/SCROLL control knob to scroll up and down to select the number and then push to select. Subtitle Language — If Equipped Selecting this item allows you to choose a default subtitle language (effective only if the language is supported by the disc).
SET Button — T o Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory , press the SET button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this station and press and release that button.
CAUTION! The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate “Disc Hot” and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player and other radio internal components.
The disc can be ejected with the radio and ignition OFF . SEEK Button (CD MODE) Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection.
Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor- mally .
frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3/WMA files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.
• Number of files and folders - Loading times will increase with more files and folders T o increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. T o create a single-session disc, enable the “Disc at Once” option before writing to the disc.
Pressing the AUX button will change the mode to auxil- iary device if the AUX jack is connected. NOTE: The AUX device must be turned on and the device’s volume set to the proper level. If the AUX audio is not loud enough, turn the device’s volume up.
Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in “Understanding The Features Of Y our V ehicle”. Operating Instructions - Uconnect™ Multimedia (Satellite Radio) (If Equipped) Refer to “Uconnect™ Multimedia (Satellite Radio)”.
The REN, RER and RBZ radios contain a CD/DVD player , USB port, and a 30-gigabyte hard drive (HDD). Sirius Satellite Radio is optional. The 6.5 in (16.5 cm) touch screen allows for easy menu selection. The RER radio also contains a Global Positioning System (GPS)-based Navigation system.
5. T o save the new time setting, touch the screen where the word “Save” is displayed. Changing Daylight Savings T ime When selected, this featur e will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1.
3. T ouch the screen wher e the words “Set T ime Zone” ar e displayed. The time zone selection menu will appear on the screen. 4. Select a time zone by touching the screen where your selection appears.
6. T o save the new time setting, touch the screen where the word “Save” is displayed. Changing Daylight Savings T ime When selected, this featur e will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1.
3. T ouch the screen where “User Clock” is displayed, the clock setting menu will appear on the screen. 4. T ouch the screen wher e the words “Set T ime Zone” ar e displayed. The time zone selection menu will appear on the screen. 5. Select a time zone by touching the screen where your selection appears.
Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume control turns continuously (360 degrees) in either direction, without stopping.
R W/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM or FM frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to incr ease or counterclockwise to decrease the frequency .
SET/RND Button — T o Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory , press the SET/RND button. The symbol SET 1 will now show in the display window . Select the button (1 to 6) you wish to lock onto this station and press and release that button.
• This radio is capable of playing compact discs (CD), recor dable compact discs (CD-R), rewritable compact discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up.
If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped).
Notes on Playing MP3 Files The radio can play MP3 files; however , acceptable MP3 file recor ding media and formats ar e limited. When writing MP3 files, pay attention to the following restric- tions. Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3.
Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3 files). Discs cr eated with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
MEDIA CENTER 130 (RES/RSC) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. V oice Command System (Radio) — If Equipped Refer to “V oice Command” in “Understanding The Fea- tures If Y our V ehicle”.
3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save time change.
Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display .
Program T ype 16-Digit Character Display Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc .
hours, press the TUNE/SCROLL control knob to set the minutes. The minutes will begin to blink. Adjust the minutes using the right side TUNE/SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. AM/FM Button Press the button to select either AM or FM mode.
Operation Instructions — CD MODE for CD and MP3 Audio Play NOTE: • The ignition switch must be in the ON or ACC position to operate the radio. • This radio is capable of playing compact discs (C.
EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF .
SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the right SEEK button to move to the next ran- domly selected track.
• Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ . ⬙ and a three- character extension) • Level 2: 31 (including a separator ⬙ . ⬙ and a three- character extension) Multisession disc formats are supported by the radio.
ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pro files are not supported. Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium.
INFO Button (CD Mode for MP3 Play) Pressing the INFO button repeatedly will scroll through the following T AG information: Song T itle, Artist, File Name, and Folder Name (if available). Press the INFO button once more to return to ⬙ elapsed time ⬙ priority mode.
UNIVERSAL CONSUMER INTERF ACE (UCI) — IF EQUIPPED NOTE: This section is for sales code RES and REQ/ REL/RET radios only with uconnect™. For sales code RER, RBZ, REN, REP , REW , RB2 or REZ touch-screen radio UCI feature, refer to the separate RER, REN, RBZ, RB2 or REZ User’s Manual.
NOTE: • Y ou may have to remove the connector pin protection cap from the 16–pin connector port, prior to connect- ing the cable. • If the iPod 威 battery is completely discharged, it may not communicate with the UCI system until a mini- mum charge is attained.
• T urning it counterclockwise (backward) by one click, during the first two seconds of the track, will jump to the previous track in the list. T urning this button at any other time in the track, will jump to the beginning of the current track. • Jump backward in the curr ent track by pressing and holding the << RW button.
During Scan mode, you can also press the << SEEK and SEEK >> buttons to select the previous and next tracks. • RND button (available on sales code RES radio only): Pressing this button toggles between Shuffle ON and Shuffle OFF modes for the iPod 威 .
• Preset 5 – Audiobooks • Preset 6 – Podcasts • Pressing a PRESET button will display the current list on the top line and the first item in that list on the second line. • T o Exit List mode without selecting a track, press the same PRESET button again to go back to Play mode .
Uconnect™ Multimedia (SA TELLITE RADIO) — IF EQUIPPED (REN/REQ/RER/RES/REU/RBZ RADIOS ONL Y) Satellite radio uses direct satellite-to-receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio.
Sirius ID number will display . The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. ESN/SID Access W ith REN/RER/RBZ Radios While in SA T mode, press the MENU button on the radio faceplate. Next, touch the SUBSCRIPTION tab on the touch screen.
• Dense tree coverage may interrupt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent reception.
R W/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arrows. TUNE Control (Rotary) T urn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the channel.
SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscription.
Operating Instructions — Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in “Understanding The Features Of Y our V ehicle”. Operating Instructions — Video Entertainment System (VES)™ (If Equipped) Refer to separate “V ideo Entertainment System (VES)™ Guide.
The button located in the center of the right-hand control will switch modes to Radio or CD. The left-hand control is a rocker type switch with a pushbutton in the center . The function of the left-hand control is dif ferent depending on which mode you are in.
3. Do not apply paper or tape to the disc; avoid scratch- ing the disc. 4. Do not use solvents such as benzene, thinner , cleaners, or anti-static sprays. 5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatur es may become too high.
Manual Heating and Air Conditioning The Manual T emperature Controls consist of a series of outer rotary dials and inner push knobs. Blower Control Rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position.
T emperature Control Rotate this control to regulate the tem- perature of the air inside the passenger compartment. Rotating the dial left into the blue area of the scale indicates cooler temperatur es while r otating right into the red area indicates warmer temperatures.
NOTE: For all settings except full cold or full hot, there is a differ ence in temperature between the upper and lower outlets. The warmer air flows to the floor outlets.
NOTE: • Continuous use of the recir culation mode may make the inside air stuffy and window fogging may occur . Extended use of this mode is not recommended. • The use of the recirculation mode in cold or damp weather will cause windows to fog on the inside, because of moisture buildup inside the vehicle.
Automatic T emperature Control (A TC) — If Equipped The Automatic T emperature Control system automati- cally maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger . Automatic Operation Operation of the system is quite simple.
Y ou will experience the greatest efficiency by simply allowing the system to function automatically . Selecting the “O” (OFF) position on the blower control stops the system completely and closes the outside air intake. The recommended setting for maximum comfort for the average person is 72°F (22°C); however , this may vary .
Blower Control For full automatic operation or for automatic blower operation turn the knob to AUTO position. In manual mode there are seven blower speeds that can be individual selected.
4 UNDERST ANDING YOUR INSTRUMENT P ANEL 267 I n f o r m a t i o n P r o v i d e d b y :.
The operator can override the AUTO mode setting to change airflow distribution by r otating the Mode Control knob (on the right) to one of the following positions. • Panel Air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow .
• Air Conditioner Control Press this button to turn on the air conditioning during manual operation only . When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the Mode control dial. Press this but- ton a second time to turn OFF the air conditioning.
• Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation button. However , under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents.
W indow Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defr ost. The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side win- dow fogging becomes a problem, increase blower speed.
Control Setting Suggestions for V arious W eather Conditions 272 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 7 7 ▫ Manual T ransaxle – If Equipped .......... 2 7 7 ▫ Automatic T ransaxle – If Equipped ........ 2 7 7 ▫ Normal Starting ..................... 2 7 8 ▫ Extreme Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) .
䡵 AutoStick 威 — If Equipped ............... 2 8 5 ▫ Operation ......................... 2 8 6 ▫ General Information .................. 2 8 6 䡵 Four-Wheel Drive Operation — If Equipped . . 287 䡵 Driving On Slippery Surfaces ............
▫ T ir e Identification Number (TIN) ......... 3 1 1 ▫ T ir e T erminology And Definitions ......... 3 1 2 ▫ T ir e Loading And T ire Pressure .......... 3 1 3 䡵 T ir es — General Information ............. 3 1 7 ▫ T ir e Pressur e ........
▫ Fuel System Cautions ................. 3 3 8 ▫ Carbon Monoxide W arnings ............ 3 3 9 䡵 Adding Fuel ......................... 3 3 9 ▫ Fuel Filler Cap (Gas Cap) .............. 3 3 9 ▫ Loose Fuel Filler Cap Message ........... 3 4 1 䡵 V ehicle Loading .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons.
Do not press the accelerator . T urn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. If the engine fails to start, the starter will disengage automatically in 10 seconds.
If Engine Fails to Start If the engine fails to start after you have followed the “Normal Starting” and “Extreme Cold W eather” proce- dures, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there. Crank the engine for no more than 15 seconds.
W ARNING! Remember to disconnect the cord before driving. Damage to the 110-1 15 V olt electrical cord could cause electrocution. MANUAL TRANSAXLE — IF EQUIPPED Five–Speed Manual T ransaxle W ARNING! Y ou or others could be injured if you leave the vehicle unattended without having the parking brake fully applied.
Use each gear in numerical order , do not skip a gear . Be sure the transaxle is in first gear , (not third), when starting from a standing position. Damage to the clutch can result from starting in third gear . For most city driving, you will find it easier to use only the lower gears.
CAUTION! If you skip more than one gear while downshifting or downshift at too high a vehicle speed, you could damage the engine, transmission, or clutch. T o maintain a safe speed and prolong brake life, shift down to second or first gear when descending a steep grade.
W ARNING! It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something.
Gear Ranges DO NOT race the engine when shifting from P ARK or NEUTRAL positions into another gear range. P ARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never use P ARK while the vehicle is in motion.
• Look at the shift indicator window on the shift lever bezel to ensure it is in the P ARK position. • Y ou must press the brake pedal to move the shift lever out of the P ARK position. CAUTION! Before moving the shift lever out of P ARK, you must turn the ignition from LOCK to ON so the steering wheel and shift lever are released.
engine from overspeed. Changes down will only happen at minimum engine speed to prevent stalling. Operation NOTE: AutoStick 威 is not functional until the CVT warms up in cold weather . AutoStick 威 operation is activated in the DRIVE position by moving the shift lever side-to-side.
• If a downshift would cause the engine to overspeed, that shift will not occur until it is safe for the engine. However . the CVT will stay in the manually selected ratio. • If the system detects powertrain overheating, the transmission will revert to the automatic shift mode and r emain in that mode until the powertrain cools off.
cluster . This can be done on the fly , at any vehicle speed. T o deactivate, simply pull on the switch one more time. The “4WD Indicator Light” will then go out. NOTE: Refer to “Electronic Brake Control System/ Electronic Stability Control (ESC)” in “Starting and Op- erating” for further information.
2. Slow down if the road has standing water or puddles. 3. Replace the tires when tread wear indicators first become visible. 4. Keep the tires properly inflated. 5. Maintain enough distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop.
CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stop- ping distances.
in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle.
Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated.
The parking brake lever is located in the center console. T o apply the parking brake, pull the lever up as firmly as possible. T o release the parking brake, pull the lever up slightly , press the center button, then lower the lever completely .
to move the shift lever out of P ARK. The parking brake should always be applied whenever the driver is not in the vehicle. W ARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons.
BRAKE SYSTEM Y our vehicle is equipped with power assisted brakes as standard equipment. In the event power assist is lost for any r eason (for example, r epeated brake applications with the engine off), the brakes will still function.
Anti-Lock Brake System (ABS) The ABS provides increased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to prevent wheel lock-up. W ARNING! • Pumping of the anti-lock brakes will diminish their effectiveness and may lead to an accident.
requir ed. However , the conventional brake system will continue to operate normally if the “Brake W arning Light” is not on. If the “ABS W arning Light” is on, the brake system should be serviced as soon as possible to restor e the benefits of anti-lock brakes.
W ARNING! The Anti-Lock Brake System (ABS) contains sophis- ticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This in- terference can cause possible loss of Anti-Lock brak- ing capability .
slip differ ential and contr ols the wheel spin acr oss a driven axle. If one wheel on a driven axle is spinning faster than the other , the system will apply the brake of the spinning wheel. This will allow mor e engine torque to be applied to the wheel that is not spinning.
Electronic Roll Mitigation (ERM) This system anticipates the potential for wheel lift by monitoring the driver ’s steering wheel input and the speed of the vehicle.
Hill Start Assist (HSA) – Manual T ransaxle Only The HSA system is designed to assist the driver when starting a vehicle from a stop on a hill. HSA will maintain the level of brake pressur e the driver applied for a short period of time after the driver takes their foot off of the brake pedal.
For vehicles not equipped with the EVIC, perform the following steps: NOTE: Y ou must complete Steps 1 through 8 within 90 seconds. 1. Center the steering wheel (front wheels pointing straight forward). 2. Shift the transaxle into NEUTRAL. 3. Apply the parking brake.
driver and compares it to the actual path of the vehicle. When the actual path does not match the intended path, ESC applies the brake of the appropriate wheel to assist in counteracting the over-steer or under-steer condition • Over-steer - when the vehicle is turning more than appropriate for the steering wheel position.
ESC Malfunction Indicator Light The “ESC Malfunction Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON position.
Partial Of f (Four-Wheel Drive Models) or On (T wo-Wheel Drive Models) This mode is entered by momentarily pressing the “ESC Off” switch. When in “Partial Off” mode, the TCS portion of ESC, except for the “limited slip” feature described in the TCS section, has been disabled and the “ESP/TCS Indicator Light” will be illuminated.
the vehicle reaches a speed of 35 mph (56 km/h). At 35 mph (56 km/h) the system returns to “Partial Off” mode, as described above. TCS remains off.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards.
T ires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- tion. Example: T145/80D18 103M. • High flotation tire sizing is based on U.S. design standards and it begins with the tire diameter molded into the sidewall.
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can ca.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ir es with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof.
Tire Loading and Tire Pressure T ire Placard Location NOTE: The proper cold tire inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard T ire Placard Loc.
This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear , and spare tires.
3. Subtract the combined weight of the driver and pas- sengers from XXX lbs or XXX kg. 4. The resulting figure equals the available amount of cargo and luggage load capacity .
316 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pressures can cause uneven wear patterns to develop across the tire tread.
CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard are always “cold tire inflation pressur e.
loading may be required for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pressures. W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous.
W ARNING! • T emporary use spare tires are for emergency use only . W ith these tires, do not drive more than 50 mph (80 km/h). • T emporary use spare tires have limited tread life. When the tread is worn to the tread wear indica- tors, the temporary use spare tire needs to be replaced.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one.
Life of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES Some areas of the country requir e the use of snow tires during W inter . Standard tir es are of the all-season type and satisfy this requirement as indicated by the M+S designation on the tire sidewall.
The suggested rotation method is shown in the following diagram. TIRE PRESSURE MONITORING SYSTEM (TPMS) The T ire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recom- mended cold placard pressure. The tire pressur e will vary with temperature by about 1 psi (6.
The TPMS will continue to warn the driver of low tire pressur e as long as the condition exists, and will not turn off until the tire pr essure is at or above the recommended cold placard pressure.
CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warnings have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style.
• Seasonal temperature changes will affect tire pressur e, and the TPMS will monitor the actual tire pressure in the tire. Base System This is the TPMS warning indicator located in the instrument cluster . The TPMS uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure lev- els.
fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat providing the system fault still exists. The T ir e Pressur e Monitoring T elltale Light will turn off when the fault condition no longer exists.
5. Once you repair or replace the original road tire and reinstall it on the vehicle in place of the compact spare tire, the TPMS will update automatically and the T ire Pressur e Monitoring T elltale Light will turn OFF , as long as no tire pressure is below the low-pressur e warning limit in any of the four active road tires.
every ignition cycle for each condition that it detects. In addition, the EVIC will display a graphic of the pressure value(s) with the low tire(s) flashing.
If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the T ire Pressure Monitoring T elltale Light will no longer flash, the ⬙ CHECK TPM SYSTEM ⬙ text message will not be present, and a pressure value will be displayed instead of dashes.
2. If you install the compact spare tire in place of a road tire that has a pressur e below the low-pressur e warning limit, upon the next ignition key cycle, a chime will sound and the T ire Pressur e Monitoring T elltale Light will still turn ON due to the low tire.
The tire pressur e sensors are covered under one of the following licenses: United States ..................... KR5S120123 Canada .....................
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE. Oxygen- ates are required in some areas of the country during the winter months to reduce carbon monoxide emissions. Fuels blended with these oxygenates may be used in your vehicle.
• disconnect and reconnect the battery to reset the engine controller memory More extensive repairs will be required for prolonged exposure to E85 fuel. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase the octane num- ber .
Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law .
Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill.
After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door . This keeps the gas cap suspended away from and protects the vehicle’s surface. CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler cap (gas cap).
W ARNING! (Continued) • Never add fuel when the engine is running. This is in violation of most state and Federal fire regula- tions and may cause the MIL to turn on. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle.
V ehicle Certification Label Y our vehicle has a V ehicle Certification Label attached to the driver’s door B-Pillar . The label contains the following information: • Name of manufacturer • Mont.
Curb W eight The curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants or cargo loaded into the vehicle.
TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer , carefully review this information to tow your load as efficiently and safely as possible.
W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident. T ongue W eight (TW) The tongue weight is the downward force exerted on the hitch ball by the trailer .
safety . The addition of a friction/hydraulic sway control also dampens sway caused by traffic and cr osswinds and contributes positively to tow vehicle and trailer stability .
T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransaxle Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. (See Note 1) 2.
Never exceed the maximum trailer tongue weight stamped on your bumper or trailer hitch. Consider the following items when computing the weight on the rear axle of the vehicle: • The trailer tongue weight of the trailer . • The weight of any other type of cargo or equipment put in or on your vehicle.
CAUTION! (Continued) • Then, during the first 500 miles (805 km) that a trailer is towed, do not drive over 50 mph (80 km/h) and do not make starts at full throttle. This helps the engine and other parts of the vehicle wear in at the heavier loads. Perform the maintenance listed in the “Maintenance Schedule.
W ARNING! (Continued) • V ehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle automatic transmission in P ARK. Always block or ⴖ chock ⴖ the trailer wheels. • GCWR must not be exceeded.
replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s GVWR and GA WR limits. T owing Requirements – T railer Brakes − Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer .
T owing Requirements – T railer Lights and Wiring Y our authorized dealer offers a trailer wiring harness designed specifically for your vehicle. Whenever you pull a trailer , regar dless of the trailer size, stop lights and turn signals on the trailer are requir ed for motoring safety .
T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. Automatic T ransaxle The automatic transaxle fluid and filter should be changed if you REGULARL Y tow a trailer for more than 45 minutes of continuous operation.
Electronic Speed Control – If Equipped − Do not use in hilly terrain or with heavy loads. − When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed. − Use speed contr ol in flat terrain and with light loads to maximize fuel efficiency .
RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) T owing This V ehicle Behind Another V ehicle (Flat T owing With All Four Wheels On The Ground) Recreational T owing Condition Manual T rans- axle V ehicl.
I n f o r m a t i o n P r o v i d e d b y :.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 3 5 8 䡵 If Y our Engine Overheats ................ 3 5 8 䡵 Automatic T ransaxle Overheating .......... 3 6 0 䡵 Jacking And T ire Changing ............... 3 6 0 ▫ Jack Location .
HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located on the instrument panel, below the radio. Press the switch to turn on the Hazard W arning flasher . When the switch is activated, all dir ectional turn signals will flash on and off to warn oncoming traffic of an emergency .
CAUTION! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. T urn off the air conditioning and wait until the pointer drops back into the normal range.
AUTOMA TIC TRANSAXLE OVERHEA TING During sustained high speed driving or trailer towing up long grades on hot days, the automatic transaxle oil may become too hot.
Jack Location The jack and jack-handle are stowed under the load floor in the cargo area. Spare Tire Stowage The compact spare tire is stowed under the rear load floor in the cargo area. Spare T ire Removal Lift up the load floor cover and remove the hold down.
5. T urn on the Hazard W arning flasher . 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked.
W ARNING! (Continued) • If working on or near a roadway , be extremely careful of motor traffic. • T o assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. • T urn on the Hazard W arning flasher .
CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 3. 3. There are two front jacking locations and two rear jacking locations on each side of the body . The front locations are outlined by two triangular cutouts, the rear ones by two rectangular cutouts.
W ARNING! T o avoid possible personal injury , handle the wheel covers with care to avoid contact with any sharp edges. NOTE: The wheel cover is held on the wheel by the wheel nuts. When reinstalling the original wheel, prop- erly align the wheel cover to the valve stem, place the wheel cover onto the wheel, then install the wheel nuts.
1 1. Check the tire pressur e as soon as possible. Correct the tire pressure as requir ed. JUMP-ST ARTING PROCEDURES If your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack.
Preparations for Jump-Start The battery in your vehicle is located in the front of the engine compartment below the air intake duct. T o access the battery remove the air intake duct by turning the two finger screws, located on the radiator support.
W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact.
CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect the positive (+) end of the jumper cable to the positive (+) post of the discharged vehicle.
8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery . 9. Disconnect the positive (+) end of the jumper cable from the positive (+) post of the discharged vehicle. 10. Reinstall the air intake duct.
CAUTION! (Continued) • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h) while in gear (no transmission shifting occurring).
CAUTION! DO NOT flat tow any vehicle equipped with an automatic transmission. Damage to the drivetrain will result. Manual T ransaxle • Front Wheel Drive (FWD) or All Wheel Drive (A WD) vehicles can be flat towed (all four wheels on the ground) with the transmission in NEUTRAL.
Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. A dolly should be used under the front wheels if the rear wheels are raised. Proper towing equipment is necessary to prevent dam- age to the vehicle.
I n f o r m a t i o n P r o v i d e d b y :.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.0L ............. 3 7 7 䡵 Engine Compartment — 2.4L ............. 3 7 8 䡵 Onboard Diagnostic System — OBD II ...... 3 7 9 ▫ Loose Fuel Filler Cap Message ........... 3 7 9 䡵 Emissions Inspection And Maintenance Programs .
▫ Exhaust System ..................... 3 9 1 ▫ Cooling System ..................... 3 9 3 ▫ Brake System ....................... 3 9 8 ▫ Automatic T ransaxle (CVT) – If Equipped . . . 400 ▫ Manual T ransaxle – If Equipped .......... 4 0 1 ▫ Rear Drive Assembly (RDA) – A WD/4WD Models Only .
ENGINE COMP ARTMENT — 2.0L 1 — W asher Fluid Reservoir 6 — Integrated Power Module 2 — Power Steering Fluid Reservoir 7 — Battery (Under Cover) 3 — Engine Oil Fill 8 — Coolant Pressure C.
ENGINE COMP ARTMENT — 2.4L 1 — W asher Fluid Reservoir 6 — Battery (Under Cover) 2 — Power Steering Fluid Reservoir 7 — Air Cleaner Filter 3 — Engine Oil Fill 8 — Coolant Pressure Cap 4 .
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems.
persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row , the system will turn on the MIL.
4. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle.
CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transaxle, power steering or air condition- ing.
when the reading is at the low end of the indicated range will result in the oil level at the full end of the indicator range. CAUTION! Do not overfill the engine.
CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New V ehicle Limited W arranty . Engine Oil V iscosity (SAE Grade) SAE 5W -20 engine oil is recommended for all operating temperatures.
station, or governmental agency for advice on how and where used oil and oil filters can be safely discarded in your area. Engine Oil Filter The engine oil filter should be replaced at every engine oil change. Engine Oil Filter Selection All of this manufacturer’s engines have a full-flow type disposable oil filter .
Maintenance-Free Battery The top of the maintenance-free battery is permanently sealed. Y ou will never have to add water , nor is periodic maintenance requir ed. W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you.
CAUTION! (Continued) • If a “fast charger” is used while the battery is in the vehicle, disconnect both vehicle battery cables before connecting the charger to the battery .
W ARNING! (Continued) • The air conditioning system contains refrigerant under high pressure. T o avoid risk of personal injury or damage to the system, adding refrigerant or any repair requiring lines to be disconnected should be done by an experienced repairman.
amount of a high quality lubricant, such as MOP AR 威 Lock Cylinder Lubricant or equivalent directly into the lock cylinder . Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild, nonabrasive cleaner or use the washer solvent.
Exhaust System The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system. If you notice a change in the sound of the exhaust system, or if.
Under normal operating conditions, the catalytic con- verter will not requir e maintenance. However , it is im- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition.
T o minimize the possibility of catalyst damage: • Do not shut off the engine or interrupt the ignition when the transaxle is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected for a prolonged period.
Check the coolant recovery bottle tubing for brittle rub- ber , cracking, tears, cuts and tightness of the connection at the bottle and radiator . Inspect the entire system for leaks. Cooling System – Drain, Flush And Refill Refer to “Maintenance Schedule” for further information.
CAUTION! (Continued) • This vehicle has not been designed for use with Propylene Glycol based engine coolant (anti- freeze). Use of Propylene Glycol based engine coolant (antifreeze) is not recommended. Adding Coolant Y our vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals.
NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze) and will requir e more frequent coolant changes.
rules for your community . T o prevent ingestion by ani- mals or children do not store ethylene glycol-based engine coolant (antifreeze) in open containers or allow it to r emain in puddles on the gr ound. If ingested by a child or pet, seek emergency assistance immediately .
• Check the coolant freeze point in the radiator and in the coolant r ecovery bottle. If engine coolant (anti- freeze) needs to be added, the contents of the coolant recovery bottle must also be protected against freezing.
Brake Master Cylinder The fluid level in the master cylinder should be checked when performing under hood services, or immediately if the brake system warning light is on.
W ARNING! (Continued) • T o avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container . Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point.
fluid which has been formulated with special metal to metal friction coefficient additives to provide the proper steel belt traction on the drive and driven pulleys. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintain- ing Y our V ehicle” for further information.
Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more than 3/16 in (4.7 mm) below the bottom of the hole. Add fluid, if necessary , to maintain the proper level.
Power T ransfer Unit (PTU) – A WD/4WD Models Only Lubricant Selection Use only the manufacturer’s recommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintain- ing Y our V ehicle” for further information. Fluid Level Check V isually inspected the unit at each oil change for leakage.
The most common causes of corrosion are: • Road salt, dirt and moisture accumulation. • Stone and gravel impact. • Insects, tree sap and tar . • Salt in the air near sea coast localities. • Atmospheric fallout/industrial pollutants. W ashing • W ash your vehicle regularly .
• It is important that the drain holes in the lower edges of the doors, r ocker panels and trunk be kept clear and open. • If you detect any stone chips or scratches in the paint, touch them up immediately . The cost of such repairs is considered the responsibility of the owner .
Stain Repel Fabric Cleaning Procedure – If Equipped Stain Repel seats may be cleaned in the following man- ner: • Remove as much of the stain as possible by blotting with a clean, dry towel.
W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas, they may cause respiratory harm. Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights.
Instrument Panel Bezels CAUTION! When installing hanging air fresheners in your ve- hicle, read the installation instructions carefully . Some air fresheners will damage the finish of painted or decorated parts if allowed to directly contact any surface.
inside of the cover . Refer to “Engine Compartment” in “Maintaining Y our V ehicle” for further information. Cavity Cartridge Fuse Mini- Fuse Description 1 Empty Empty 2 15 Amp Lt Blue A WD/4W.
Cavity Cartridge Fuse Mini- Fuse Description 16 15 Amp Lt Blue IGN Run/Acc Dome Lamp/Sunroof/Rear W iper Motor/ACC Inverter 17 10 Amp Red IOD Feed Mod-Wcm 18 40 Amp Green ASD Relay Contact PWR Feed 19.
Cavity Cartridge Fuse Mini- Fuse Description 31 10 Amp Red Headlamp W asher Relay Control – If Equipped 32 30 Amp Pink ENG ASD Control Feed 1 33 10 Amp Red ABS MOD/J1962 Conn/PCM 34 30 Amp Pink ABS .
• Disengage the mini-fuse in the Power Distribution Center labeled IOD (Ignition Off-Draw). • Disconnect the negative cable from the battery . REPLACEMENT BULBS All the inside bulbs are brass or glass wedge base. Aluminum base bulbs are not approved and should not be used for replacement.
BULB REPLACEMENT Headlamps 1. Raise the hood and locate the connector behind the headlamp. 2. Reach into the engine compartment and pull the red lock out at the green connector .
3. Remove green connector from back of bulb by pulling straight back. 4. T wist the bulb to the left. 414 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
5. Pull bulb outward from assembly . NOTE: These are halogen bulbs. T ake care not to touch the bulb with your fingers. Body oils from your fingers could cause excessive heat buildup which reduces bulb life. Fog Lamps 1. Access lamp through the lower fascia cutout.
T ail Lamp, Rear T urn Signal and Backup Lamp 1. Remove the two push-pins from the taillamp housing. 2. Grasp the taillamp and pull firmly to disengage the lamp from the aperture panel.
4. Remove bulb from socket and replace. License Lamps 1. Use a screw driver to gently pry against the side of the snap tab to remove the lamp from the liftgate.
2. Rotate the socket 1/4 turn counterclockwise. 3. Pull bulb from socket. 418 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
Center High-Mounted Stoplamp Light is an LED assembly . See your authorized dealer for replacement. Off-Road Lamp 1. Remove the three screws attaching the lens to the housing.
2. Unlatch the wire clasp securing the bulb into the housing and rotate it into the position shown. 3. Disconnect the bulb from the lamp harness to replace the bulb.
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 13.6 Gallons 51.5 Liters Engine Oil with Filter 2.0L and 2.4L Engine (SAE 5W -20, API Certified) 4.5 Quarts 4.26 Liters Cooling System * 2.0L and 2.4L Engine (MOP AR 威 Engine Coolant/Antifreeze 5 Y ear/100,000 Mile Formula or equivalent) 7.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hy- brid Organic Additive T echnology) or equivalent. Engine Oil Use API Certified SAE 5W -20 Engine Oil, meeting the requir ements of Chrysler Material Standard MS-6395.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransaxle (CVT) – If Equipped MOP AR 威 CVTF+4 威 Manual T ransaxle – If Equipped MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product.
I n f o r m a t i o n P r o v i d e d b y :.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 2 6 䡵 Maintenance Schedule .................. 4 2 6 ▫ Required Maintenance Intervals .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued pr oper functioning of the emissions control system.
NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change and even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time.
Once a Month • Check the tire pressure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of the coolant reservoir , brake master cylinder , and power steering — add as needed.
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs. ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes.
42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Author.
60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs. ❏ Inspect the brake linings; replace if necessary .
66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs. ❏ Inspect and replace PCV valve if necessary .
102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Flush and replace the engine coolant if not done at 60 months.
1 14,000 Miles (190,000 km) or 1 14 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature A.
120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs. ❏ Inspect the brake linings; replace if necessary .
126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
150,000 Miles (250,000 km) or 150 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs. ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes.
† This maintenance is recommended by the manufacturer to the owner , but is not requir ed to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 4 7 ▫ Prepar e For The Appointment ........... 4 4 7 ▫ Prepar e A List ...................... 4 4 7 ▫ Be Reasonable W ith Requests .
䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 5 3 ▫ T readwear ......................... 4 5 3 ▫ T raction Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center .
has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. Y ou’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer .
vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tir e grading categories were established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle.
T emperature Grades The temperature grades are A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10 I n f o r m a t i o n P r o v i d e d b y :.
ABS (Anti-Lock Brake System) .............. 2 9 7 Adding Engine Coolant (Antifreeze) .......... 3 9 5 Adding Fuel ........................... 3 3 9 Adding W asher Fluid ..................... 3 9 0 Additives, Fuel ......................... 3 3 7 Air Cleaner , Engine (Engine Air Cleaner Filter) .
Overheating .......................... 3 6 0 Selection Of Lubricant ................... 4 0 0 Shifting ............................. 2 8 4 Special Additives ...................... 4 0 1 Autostick ............................. 2 8 5 Battery ...........
Cargo Light ............................ 1 6 9 Cargo Load Floor ........................ 1 7 2 Cargo T ie-Downs ........................ 1 7 3 Carrier , Luggage ........................ 1 7 6 Cellular Phone ........................ 93,259 Center High Mounted Stop Light .
Disposal of Used Coolant ................ 3 9 6 Drain, Flush, and Refill .................. 3 9 4 Inspection ........................... 3 9 7 Points to Remember ................. 396,397 Pressur e Cap ......................... 3 9 6 Selection of Coolant (Antifreeze) .
Electronic Stability Program ............... 3 0 3 T raction Control System ................. 2 9 9 Electronic Speed Control (Cruise Control) ...... 1 4 8 Electronic Stability Program (ESP) ............ 3 0 3 Electronic V ehicle Information Center (EVIC) .
Flat T ire Stowage ........................ 3 6 5 Flooded Engine Starting ................... 2 7 9 Fluid, Brake ........................... 4 2 3 Fluid Capacities ......................... 4 2 1 Fluid Leaks ............................. 8 3 Fluid Level Checks Automatic T ransaxle .
Gauges Coolant T emperatur e ................... 1 8 9 Fuel ............................... 1 8 3 Odometer ........................... 1 9 2 T achometer .......................... 1 8 6 Gearshift .............................. 2 8 4 General Information .
Ignition Key Removal ..................... 1 2 Immobilizer (Sentry Key) ................... 1 5 Infant Restraint .......................... 7 3 Information Center , V ehicle ................. 1 9 6 Inside Rearview Mirror .................... 8 9 Instrument Cluster .
Lights .............................. 83,140 Airbag ...................... 57,64,70,82,184 Alarm .............................. 1 8 8 Anti-Lock ........................... 1 8 5 Back-Up ............................ 4 1 6 Brake W arning ...............
Locks Child Protection ........................ 3 2 Door ................................ 2 8 Power Door ........................... 2 9 Lubrication, Body ....................... 3 8 9 Luggage Rack (Roof Rack) ................. 1 7 6 Lumbar Support ..
Odometer ............................. 1 9 2 T r i p ............................. 190,192 Oil Change Indicator ..................... 1 9 8 Oil Change Indicator , Reset ................. 1 9 8 Oil, Engine ......................... 383,421 Capacity ...
W indows ............................. 3 3 Power Steering Fluid ..................... 4 2 3 Power T ransfer Unit ...................... 4 0 3 Pregnant W omen and Seat Belts .............. 5 5 Preparation for Jacking .................... 3 6 1 Pretensioners Seat Belts .
Roll Over W arning ........................ 4 Roof Rack (Luggage Rack) ................. 1 7 6 Rotation, T ires .......................... 3 2 5 Safety Checks Inside V ehicle ................. 8 2 Safety Checks Outside V ehicle ............... 8 3 Safety Defects, Reporting .
Service Assistance ....................... 4 4 7 Service Contract ......................... 4 4 9 Service Manuals ........................ 4 5 1 Setting the Clock ............. 208,222,224,227,236 Settings, Personal ........................ 2 0 1 Shift Speeds, Manual T ransaxle .
System, Remote Starting .................... 2 5 T achometer ............................ 1 8 6 T aillights .............................. 4 1 6 T emperatur e Control, Automatic (A TC) ........ 2 6 4 T emperatur e Gauge, Engine Coolant ....... 189,359 T ether Anchor , Child Restraint .
Spinning ............................ 3 2 1 T r ead W ear Indicators ................... 3 2 2 T ongue W eight/T railer W eight .............. 3 4 7 T owing ............................... 3 4 4 24-Hour T owing Assistance ............... 1 0 7 Disabled V ehicle .
Uniform T ire Quality Grades ................ 4 5 3 Universal Consumer Interface (UCI) Connector . . . 247 Universal T ransmitter ..................... 1 5 2 Unleaded Gasoline ....................... 3 3 5 V anity Mirrors ........................... 9 2 V ariance, Compass .
An important point after buying a device Jeep Compass (2010) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jeep Compass (2010) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jeep Compass (2010) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jeep Compass (2010) you will learn all the available features of the product, as well as information on its operation. The information that you get Jeep Compass (2010) will certainly help you make a decision on the purchase.
If you already are a holder of Jeep Compass (2010), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jeep Compass (2010).
However, one of the most important roles played by the user manual is to help in solving problems with Jeep Compass (2010). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jeep Compass (2010) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
