Instruction/ maintenance manual of the product Commander (2010) Jeep
Go to page of 460
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................. 1 1 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
I n f o r m a t i o n P r o v i d e d b y :.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 Rollover W arning ....................... 5 䡵 How T o Use This Manual .................. 6 䡵 W arnings And Cautions ................... 8 䡵 V ehicle Identification Number .
INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This is a specialized utility vehicle designed for both on-road and of f-road use.
This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a W arranty Information Booklet, located on the DVD, and various customer-oriented documents.
Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury . In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million annually .
1 INTRODUCTION 7 I n f o r m a t i o n P r o v i d e d b y :.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
I n f o r m a t i o n P r o v i d e d b y :.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 4 ▫ W ireless Ignition Node (WIN) ............ 1 4 ▫ Integrated Ignition Key ................. 1 5 ▫ Ignition Key Removal .................. 1 5 ▫ Key-In-Ignition Reminder .
▫ Remote Open W indow Feature — If Equipped ........................... 2 3 ▫ Using The Panic Alarm ................. 2 4 ▫ Programming Additional T ransmitters ...... 2 4 ▫ T ransmitter Battery Service .............. 2 4 ▫ General Information .
▫ Enhanced Seat Belt Use Reminder System (BeltAlert 威 ) ......................... 4 7 ▫ Seat Belts And Pregnant W omen .......... 4 8 ▫ Seat Belt Extender ..................... 4 8 ▫ Supplemental Restraint Systems (SRS) ...... 4 9 ▫ Advanced Front Airbag Featur es .
A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Remote Keyless Entry (RKE) transmitter with integrated ignition key and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the double-sided key into the ignition switch with either side up.
Integrated Ignition Key The integrated ignition key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) trans- mitter and an emergency key , which stores in the r ear of the RKE transmitter . The emergency key allows for entry into the vehicle should the battery in the vehicle or the RKE transmitter go dead.
NOTE: • If you try to remove the key befor e you place the shift lever in P ARK, it may become trapped temporarily in the ignition switch. If this occurs, rotate the key to the right slightly , then remove the key as described.
Key-In-Ignition Reminder If you open the driver’s door with the integrated ignition key in the ignition, a chime will sound to remind you to remove the key . NOTE: The Key-In-Ignition reminder only sounds when the integrated ignition key is placed in the LOCK or ACC position.
NOTE: The Sentry Key 威 Immobilizer system is not compatible with aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security pr otection. All of the RKE transmitters provided with your new vehicle have been programmed to the vehicle electr onics.
General Information The Sentry Key 威 system complies with FCC rules Part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation.
V ehicle Security Light (located in the instrument cluster) will flash rapidly for about 16 seconds to signal that the V ehicle Security Alarm is arming.
REMOTE KEYLESS ENTR Y (RKE) This system allows you to lock or unlock the doors and liftgate, or activate the panic alarm, from distances up to approximately 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmitter . The RKE transmitter does not need to be pointed at the vehicle to activate the system.
Remote Key Unlock, Driver Door/All Doors First Press This feature lets you pr ogram the system to unlock either the driver’s door or all doors, on the first press of the UNLOCK button on the RKE transmitter .
T o Lock the Doors Press and r elease the LOCK button on the RKE transmit- ter to lock all doors. The turn signal lamps will flash and the horn will chirp to acknowledge the signal. Sound Horn with Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter .
Using the Panic Alarm T o turn the Panic Alarm featur e on or off, pr ess and hold the P ANIC button on the RKE transmitter for at least one second and release. When the Panic Alarm is on, the headlights and park lamps will flash, the horn will pulse on and off, and the interior lights will turn on.
2. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. Reposition the access door panel over the battery opening and snap into place.
If your RKE transmitter fails to operate from a normal distance, check for these two conditions: 1. A weak battery in the RKE transmitter . The expected life of the battery is a minimum of three years. 2. Closeness to a radio transmitter such as a radio station tower , airport transmitter , and some mobile or CB radios.
W ARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Mon- oxide (CO) which is odorless and colorless. Car- bon monoxide is poisonous and can cause serious injury or death when inhaled. • Keep Remote Keyless Entry (RKE) transmitters away from children.
NOTE: T o avoid unintentional shutdowns, the system will disable the one time press of the REMOTE ST ART button for two seconds after receiving a valid Remote Start request.
Power Door Locks The power door lock switch is located on each front door panel. Press the switch to lock or unlock the doors. If the plunger is down when the door is closed, the door will lock. Therefor e, make sure the key is not inside the vehicle before closing the door .
This feature is selectable and can be turned on or of f. Refer to “Auto Door Locks” under “Customer- Programmable Featur es” in the “Electronic V ehicle Infor- mation Center (EVIC),” in Section 4 of this manual, or see your authorized dealer .
passenger/rear passenger door windows. The window controls will operate only when the ignition switch is in the ON or ACC position. The power window switches remain active for up to 10 minutes after the ignition switch has been turned OFF . Opening a vehicle front door will cancel this featur e.
Auto Up Feature with Anti-Pinch Protection — Driver’s and Front Passenger Door Only Lift the window switch to the second detent, release, and the window will go up automatically . T o stop the window from going all the way up during the Auto Up operation, push down on the switch briefly .
Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
W ARNING! Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. Y ou and your pas- sengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. Liftgate Flipper Glass The liftgate flipper glass is also unlocked when the liftgate is unlocked.
W ARNING! T o avoid injury , stand back when opening. Glass will automatically rise. Once the liftgate flipper glass has been opened, connec- tion to the rear window wiper is interr upted, preventing activation of the rear wiper blade while the flipper glass is open.
When the LIFTGA TE button on the RKE transmitter is pressed two times, the turn signals will flash twice to signal that the liftgate is opening or closing. NOTE: • In the event of a power malfunction to the liftgate, an emergency liftgate latch r elease can be used to open the liftgate.
• The power liftgate must be in the full open position for rear liftgate close button or over head console close button to operate. If the liftgate is not fully open, press the Liftgate button on the Fob with Integrated Key (FOBIK) to fully open the liftgate, and then press it again to close.
W ARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes.
• Knee bolsters/blockers for front seat occupants • Front seat belts incorporate pr etensioners to enhance occupant protection by managing occupant ener gy during an impact event If you will be ca.
Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thr own from the vehicle. Seat belts r educe the possibility of ejection and the risk of injury caused by striking the inside of the vehicle.
Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
W ARNING! (Continued) • A belt that is worn under your arm is very danger - ous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs are not as strong as shoulder bones.
6. T o release the belt, push the r ed button marked PRESS on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow it to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
As a guide, if you are shorter than average, you will prefer a lower position, and if you ar e taller than average, you will prefer a higher position. When you r elease the anchorage, try to move it up or down to make sure that it is locked in position.
How to Disengage the Automatic Locking Mode Disconnect the combination lap/shoulder belt and allow it to retract completely to disengage the Automatic Locking Mode and activate the V ehicle Sensitive (Emer- gency) Locking mode.
NOTE: These devices are not a substitute for pr oper seat belt placement by the occupant. The seat belt must still be worn snugly and positioned properly . The pretensioners ar e triggered by the Occupant Re- straint Controller (ORC). Like the airbags, the pr etension- ers are single use items.
4. T urn the ignition key to the OFF position. A single chime will sound to signify that you have successfully completed the programming. BeltAlert 威 can be reactivated by r epeating this procedur e.
Supplemental Restraint Systems (SRS) This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the center of the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove compartment.
The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation based on the severity and type of collision. This vehicle may also be equipped with Supplemental Side Airbag Inflatable Curtains (SABIC) to protect the driver , front, and r ear passengers sitting next to a win- dow .
low , medium, or high. If a low output is sufficient to meet the need, the remaining gas in the inflator is expended. W ARNING! • Do not put anything on or around the airbag covers or attempt to open them manually . Y ou may damage the airbags and you could be injured because the airbags may no longer be functional.
NOTE: • Should a vehicle rollover occur , the pretensioners and/or SABIC airbags on both sides of the vehicle may deploy . • Airbag covers may not be obvious in the interior trim; but they will open during airbag deployment.
Along with seat belts and pretensioners, Advanced Front Airbags work with the knee bolsters to provide impr oved protection for the driver and fr ont passenger .
Y ou should read the instructions pr ovided with your child restraint to make sur e that you are using it pr operly . All occupants should AL W A YS wear their lap and shoul- der belts properly . The driver and front passenger seats should be moved back as far as practical to allow the Advanced Front Airbags room to inflate.
Airbag Deployment Sensors and Controls Occupant Restraint Controller (ORC) The ORC is part of a Federally regulated safety system requir ed for this vehicle. The ORC determines if deployment of the front and/or side airbags in a frontal or side collision is r equired.
The ORC monitors the readiness of the electr onic parts of the system whenever the ignition switch is in the ST AR T or ON position. If the key is in the LOCK position, in the ACC position, or not in the ignition, the airbags are not on and will not inflate.
the Advanced Fr ont Airbags. Dif ferent airbag inflation rates are possible, based on the collision type and sever - ity . The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the bags inflate to their full size.
Front and Side Impact Sensors In front and side impacts, impact sensors aid the ORC in determining appropriate r esponse to impact events. Ad- ditional sensors in the ORC determine the level of airbag deployment and provide verification.
If you do have a collision which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abra- sions and/or skin reddening to the driver and fr ont passenger as the airbags deploy and unfold.
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you.
Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system immediately .
2. Under certain circumstances, EDR data may not be recor ded (e.g., loss of battery power). In conjunction with other data gathered during a com- plete accident investigation, the electronic data may.
4. Otherwise required by law . Data parameters that are r ecorded: • Diagnostic trouble code(s) and warning light status for electronically-contr olled safety systems, including the airbag system .
W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a projectile inside the vehicle. The force required to hold even an infant on your lap can become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured.
W ARNING! (Continued) • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint.
locking retractor , pull the belt from the retractor until there is enough to allow you to pass thr ough the child restraint and slide the latch plate into the buckle.
Older Children and Child Restraints Children who weigh mor e than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing dir ection are for childr en who weigh 20 to 40 lbs (9 to 18 kg), and who are older than one year .
LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CHildren) Y our vehicle’s second row seat is equipped with the child restraint anchorage system called LA TCH.
If your child seats are not LA TCH-compatible, you can only install the child seats using the vehicle’s seat belts. For typical installation instructions, r efer to “Installing the LA TCH-Compatible Child Restraint System”.
Many , but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap.
W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
the buckle, turn the buckle around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secur e, try a differ ent seating position. T o attach a child restraint tether strap: Route the tether strap over the seatback and attach the hook to the tether anchor located on the back of the seat.
ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not r equired for the engine in your vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
W ARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly . Exhaust Gas W ARNING! Exhaust gases can injure or kill.
Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for br oken, damaged, deteriorated, or mispositioned parts.
Defroster Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 8 2 ▫ Inside Day/Night Mirror ................ 8 2 ▫ Automatic Dimming Mirror — If Equipped . . . 82 ▫ Outside Mirrors ...................... 8 3 ▫ Exterior Mirrors Folding Featur e .
▫ Four-W ay Passenger’s Power Seat — If Equipped ....................... 8 8 ▫ Head Restraints ...................... 8 9 ▫ Front Heated Seats — If Equipped ......... 9 0 ▫ Rear Heated Seats — If Equipped .......... 9 1 ▫ 40/20/40 Second Row Folding Seat .
▫ Battery Saver Feature — Exterior/Interior Lights ............................ 1 1 0 ▫ Lights-On Reminder .................. 1 1 0 ▫ T urn Signals ........................ 1 1 0 ▫ Lane Change Assist .................... 1 1 1 ▫ High/Low Beam Switch .
䡵 Rear Park Assist — If Equipped ........... 1 2 2 ▫ Rear Park Assist Sensors ............... 1 2 2 ▫ Rear Park Assist W arning Display ........ 1 2 3 ▫ Enable/Disable The Rear Park Assist ...... 1 2 4 ▫ Service The Rear Park Assist ......
▫ V enting Sunroof — Express ............. 1 3 8 ▫ Sunshade Operation .................. 1 3 9 ▫ W ind Buffeting ...................... 1 3 9 ▫ Sunroof Maintenance ................. 1 3 9 ▫ Ignition Off Operation ................. 1 3 9 ▫ Sunroof Fully Closed .
MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror . The mirror should be adjusted to center on the view through the r ear window .
CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean.
Outside Automatic Dimming Mirrors — If Equipped The driver and passenger outside mirrors will automati- cally adjust for glare fr om vehicles behind you. This feature is contr olled by the inside Automatic Dimming Mirror and can be turned on or of f by pressing the button at the base of the inside mirror .
Illuminated V anity Mirrors — If Equipped T o access an illuminated vanity mirror , flip down one of the sun visors. Lift the cover to reveal the mirr or . The light will turn on automatically . Sun Visor Extension — If Equipped This feature has a pull out extension on the sun visor for increased coverage.
W ARNING! • DO NOT allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Be sure everyone in your vehicle is in a seat and using a seat belt properly .
W ARNING! Do not ride with the seatback reclined so that the seat belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.
Eight–W ay Driver’s Power Seat The driver’s power seat switches are located on the outboard side of the driver’s seat. The bottom switch controls up/down, forwar d/rearwar d, and tilt adjust- ment. The top switch controls the seatback r ecline adjust- ment.
NOTE: The four-way seat does not have an up/down adjustment. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured.
W ARNING! Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the event of a collision. The head restraints should always be checked prior to operating the vehicle and never adjusted while the vehicle is in motion.
W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, ex- haustion or other physical condition must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long periods of time.
After turning the ignition ON, you can choose from High, Low or Off heat settings. Amber indicator lights in each switch indicate the level of heat in use. T wo indicator lights will illuminate for High, one for Low and none for Off. Press the switch once to select High-level heat- ing.
W ARNING! (Continued) • Do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat.
2. Fold the seatback down, and tumble the seat forward. W ARNING! Do not drive the vehicle with the outer second row seats in the tumbled position. The outer second row seats are only intended to be tumbled for entry and exit to the third row seat. Failure to follow these instructions could result in personal injury .
Folding Middle Seatback (Second Row Seat) 1. Pull the release strap. Release Strap Release Strap 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 95 I n f o r m a t i o n P r o v i d e d b y :.
2. Lower the center seatback. Center Seat Armrest (Second Row Seat) — If Equipped The second row center seat may be equipped with a armrest. Pull strap to lower armr est.
50/50 Third Row Folding Seat — If Equipped T o Lower Rear Seat Either side of the third r ow seat can be lowered to allow for extended cargo space and still maintain some r ear seating room. 1. Open the tailgate. 2. Pull the seatback release handle (toward r ear of ve- hicle) and lower the seatback using the pull strap.
T o Raise Rear Seat 1. Open the tailgate. 2. Detach pull strap from back of seat and pull seatback upward until it locks into place. Reattach strap. 3.
Y our vehicle is equipped with two RKE transmitters. One or both RKE transmitters can be linked to either memory position. The memory system can accommodate up to four RKE transmitters, each one linked to either of the two memory positions.
5. T urn on the radio and set the radio station presets (up to 12 AM and 12 FM stations can be set). 6. T urn the ignition switch to the LOCK position and remove the key . 7. Press and release the S (SET) button located on the driver’s door . 8. W ithin five seconds, press and r elease MEMOR Y button 1 or 2 on the driver’s door .
T o recall the memory setting for driver two, press MEMOR Y button number 2 on the driver’s door , or the UNLOCK button on the RKE transmitter linked to memory position 2. A recall can be cancelled by pr essing any of the MEMOR Y buttons on the drivers door during a r ecall (S, 1, or 2).
Easy Entry/Exit Seat This feature pr ovides automatic driver’s seat positioning which will enhance driver mobility out of and into the vehicle. There ar e two possible Easy Entry/Exit adjustments available: • The seat cushion will move rearwar d approximately 2.
TO OPEN AND CLOSE THE HOOD T o open the hood, two latches must be released. 1. Pull the release lever inside your vehicle located below the instrument panel and in fr ont of the driver’s door . 2. Reach under the hood, move safety latch to the left and lift the hood.
W ARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. Be sure all hood latches are fully latched before driving.
Headlights and Parking Lights T urn the end of the multifunction lever to the first detent for parking light operation. T urn to the second detent for headlight operation.
This system performs two functions. W ith the engine running and the multifunction lever in the AUTO posi- tion, the headlights will turn on and off based on the surrounding light levels. Headlights On Automatically With Wipers If your vehicle is equipped with Automatic Headlights it also has this customer-pr ogrammable feature.
NOTE: If the windshield or SmartBeam™ mirror is replaced, the SmartBeam™ mirr or must be re-aimed to ensure pr oper performance. See your local authorized dealer . T o Activate 1. Select “Auto High Beams” Refer to “Electronic V ehicle Information Center (EVIC) — Customer-Pr ogrammable Features” in Section 4 of this manual.
Daytime Running Lights — If Equipped The high beam headlights come on at a low intensity level whenever the engine is running, and the transmis- sion is not in the P ARK position. The lights remain on until the ignition switch is turned OFF or the parking brake is engaged.
• A front fog light is a lighting device pr oviding illumi- nation forward of the vehicle under conditions of fog, rain, snow or dust. The front fog lights supplement the low beams of a standard headlight system. • Proper aim and adjustments of the fr ont fog lights should be made to prevent excessive glar e for other drivers.
Battery Saver Feature — Exterior/Interior Lights If the multifunction lever is left in the interior light position, parking light position, or the headlight position when the ignition switch is moved to the OFF position, the battery saver feature will automatically turn of f the exterior and interior lights after eight minutes.
Lane Change Assist T ap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn of f. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beam.
by pressing the fr ont recessed ar ea of the lens. T o turn these lights off, pr ess the recessed ar ea of the lens a second time. WINDSHIELD WIPERS AND W ASHERS The windshield wiper/washer control lever is located on the right side of the steering column.
Windshield Wiper Operation Rotate the end of the lever upward to the LO position for low-speed wiper operation. Rotate the end of the lever upward to the HI position for high-speed wiper operation. CAUTION! Always remove any buildup of snow that prevents the windshield wiper blades from returning to the “park” position.
W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with the defroster before and during windshield washer use.
delay interval. The delay can be regulated fr om a maxi- mum of approximately 18 seconds between cycles, to a cycle every 1/2 second. NOTE: The wiper delay times depend on vehicle speed. If the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled.
• The Rain Sensing feature may not function pr operly when ice, or dried salt water is present on the wind- shield. • Use of Rain-X 威 or products containing wax or silicone may reduce Rain Sensing performance.
TIL T/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downwar d. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column.
improved position with the steering wheel. The adjust- able pedal system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. The position of the brake and accelerator pedals can be adjusted without compromising safety or comfort in actuating the pedals.
CAUTION! Do not place any article under the adjustable pedal’s or impede its ability to move as it may cause damage to the pedal controls. Pedal travel may become lim- ited if movement is stopped by an obstruction in the adjustable pedal’s path. W ARNING! Do not adjust the pedals while the vehicle is moving.
NOTE: In order to ensur e proper operation, the Elec- tronic Speed Contr ol System has been designed to shut down if multiple Speed Control functions ar e operated simultaneously .
T o Deactivate A soft tap on the brake pedal, pulling the Electronic Speed Control lever towar d you, or normal brake pres- sure while slowing the vehicle will deactivate Electr onic Speed Control without erasing the set speed memory . Pressing the ON/OFF button or turning of f the ignition switch erases the set speed memory .
NOTE: • The Electronic Speed Contr ol System maintains speed up and down hills. A slight speed change on moderate hills is normal. • On steep hills a greater speed loss or gain may occur so it may be preferable to drive without Electr onic Speed Control.
Rear Park Assist W arning Display The Rear Park Assist W arning Display , located in the headliner near the flipper glass, provides both visible and audible warnings to indicate the distance between the rear fascia and the detected obstacle.
W ARNING DISPLA Y DIST ANCES DISPLA Y LED OBST ACLE DIST ANCE FROM: LED COLOR AUDIBLE SIGNAL REAR CORNERS REAR CENTER 1st LED 59 in (150 cm) Y ellow Y es, Half Second 2nd LED 51 in (130 cm) Y ellow None 3rd LED 45 in (1 15 cm) Y ellow None 4th LED 31.
When the switch is pressed to disable the system, the instrument cluster will display the “P ARK ASSIST DIS- ABLED” message. Refer to “Electronic V ehicle Informa- tion Center (EVIC)” in Section 4 of this manual.
• When you turn off the Rear Park Assist System, the instrument cluster will display “P ARK ASSIST DIS- ABLED.” Furthermore, once you turn of f the Rear Park Assist System, it remains off until you turn it on again, even if you cycle the ignition key .
CAUTION! • The Rear Park Assist System is only a parking aid and it is unable to recognize every obstacle, in- cluding small obstacles. Parking curbs might be temporarily detected or not detected at all. Ob- stacles located above or below the sensors will not be detected when they are in close proximity .
W ARNING! (Continued) • Before using the Rear Park Assist System, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the ve- hicle when the vehicle is not used for towing.
CAUTION! • T o avoid vehicle damage, the Rear Camera system should only be used as a parking aid. The Rear Camera system is unable to view every obstacle or object in your drive path. • T o avoid vehicle damage, the vehicle must be driven slowly when using the Rear Camera system to be able to stop in time when an obstacle is seen.
T urning the Rear Camera On or Off — Without Navigation Radio 1. Press the ⬙ menu ⬙ hard key . 2. Select ⬙ system setup ⬙ soft key . 3. Enable or disable the rear camera feature by selecting ⬙ enable rear camera in r everse ⬙ soft key . 4.
NOTE: HomeLink 威 is disabled when the V ehicle Secu- rity Alarm is active. W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets are in the path of the door or gate.
Programming HomeLink 姞 Before Y ou Begin If you have not trained any of the HomeLink 威 buttons, erase all channels before you begin training. T o do this, press and hold the two outside buttons for up to 20 seconds. The EVIC will display “CLEARING CHANNELS.
NOTE: Some gate operators and garage door openers may requir e you to replace Step 3 with pr ocedures noted in the “Gate Operator/Canadian Programming” section. 4. Press and hold the just-trained HomeLink 威 button. If the channel has been trained, the EVIC display will now state “CHANNEL # TRANSMIT .
6. Firmly press and release the “LEARN” or “TRAIN- ING” button. The name and color of the button may vary by manufacturer . NOTE: There ar e 30 seconds in which to initiate the next step after the “Learn” button has been pressed.
If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Pr ogramming HomeLink 威 ” earlier in this section. Using HomeLink 姞 T o operate, simply press and release the pr ogrammed HomeLink 威 button.
T roubleshooting Tips If you are having tr ouble programming HomeLink 威 , her e are some of the most common solutions: • Replace the battery in the original transmitter . • Press the learn button on the garage door opener to complete the training for rolling code.
POWER SUNROOF — IF EQUIPPED The power sunroof switch is located on the over head console. W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch.
Opening Sunroof — Express Press the switch r earward and r elease, and the sunroof will open automatically from any position. The sunr oof will open fully , then stop automatically . This is called “Express Open”. During Expr ess Open operation, any movement of the sunroof switch will stop the sunr oof.
Sunshade Operation The sunshade can be opened manually . However , the sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open. Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears.
NOTE: Hold onto shade handle until shade is com- pletely open or closed. ELECTRICAL POWER OUTLETS Y our vehicle is equipped with 12 V olt power outlets that can be used to power cellular phones, small electronics and other low powered electrical accessories.
• T o ensure proper operation a MOP AR 威 knob and element must be used. The front power outlets ar e located to the left and right of the convenience tray (lower center of instrument panel). Pull lightly on the tab of the plastic cover to access these power outlets.
W ARNING! T o avoid serious injury or death: • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
POWER INVERTER — IF EQUIPPED There is a 1 15 V olt, 150 W att inverter outlet located on the back of the center console to convert DC current to AC current. This outlet can power cellular phones, electr on- ics and other low power devices requiring power up to 150 W atts.
may have to be reset manually . T o reset the inverter manually press the power inverter button OFF and ON. T o avoid overloading the circuit, check the power ratings on electrical devices prior to using the inverter . Press the power inverter switch (located on the upper switch bank) to turn the power on to the outlet.
W ARNING! T o avoid serious injury or death: • Do not use a three-prong adaptor . • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use. • If this outlet is mishandled it may cause an electric shock and failure.
Cupholders — Second Row Seat The second row seat has two cupholders in the center armrest. Lower the center armr est. Refer to “Seats” in this section.
CARGO AREA FEA TURES Cargo Load Floor The panel in the load floor is reversible for added utility . One side is carpeted and the other side features a plastic lined tray which holds a variety of items. The cargo load floor is held by spring loaded latches.
1. Flip up pull loop(s) so they are perpendicular (straight up) to the top surface of the tray . 2. Pull up on loop(s) and twist 90 degrees, so they are parallel to the slotted hole in tray .
Rotate the switch upward to the “On” position to activate the rear wiper . NOTE: The rear wiper operates in an intermittent mode only . Rotate the switch upward to the “washer” position to activate that rear washer . The washer pump will continue to operate as long as the lever or ring is engaged.
Rear Window Defroster The rear window defr oster button is located on the climate control panel. Pr ess this button to turn on the rear window defr oster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defr oster is on.
NOTE: If not equipped with crossbars, your authorized dealer can order and install MOP AR 威 crossbars built specifically for this roof rack system. Distribute cargo weight evenly on the r oof rack crossbars. The roof rack does not incr ease the total load carrying capacity of the vehicle.
The optional crossbars must also be secur ed in one of the five detent positions marked with an arrow on the siderails to prevent movement. T o move the crossbars, loosen the thumb screws located at t.
CAUTION! (Continued) • T o avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity of 150 lbs (68 kg). Always distribute heavy loads as evenly as possible and secure the load appropri- ately .
I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 1 5 8 䡵 Instrument Cluster .................... 1 5 9 䡵 Instrument Cluster Description ............ 1 6 0 䡵 Electronic V ehicle Information Center (EVIC) .
䡵 Sales Code RES — AM/FM Stereo Radio W ith CD Player (MP3 AUX Jack )............... 1 8 9 ▫ Operating Instructions — Radio Mode ..... 1 8 9 ▫ Operation Instructions — CD Mode For CD And MP3 Audio Play ................. 1 9 2 ▫ Notes On Playing MP3 Files .
▫ Selecting uconnect™ studios (Satellite) Mode ............................. 2 1 6 ▫ Satellite Antenna ..................... 2 1 6 ▫ Reception Quality .................... 2 1 6 ▫ Operating Instructions - uconnect™ studios (Satellite) Mode .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 5 — Upper Switch Bank 9 — Lower Switch Bank 2 — Instrument Cluster 6 — Power Outlet/Cigar Lighter 10 — Climate Controls 3 — Radio 7 — Storage.
INSTRUMENT CLUSTER 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 159 I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER DESCRIPTION 1. Speedometer Indicates vehicle speed. 2. Brake W arning Light This light monitors various brake functions, including brake fluid level and parking brake application.
W ARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. Y ou could have an accident. Have the vehicle checked immediately . V ehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electr onic Brake Force Distribution (EBD).
5. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system called OBD II that monitors engine and automatic transmission con- trol systems. The light will illuminate when the key is in the ON position before engine start.
6. Airbag W arning Light This light turns on and remains on for six to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not on during starting, stays on, or turns on while driving, have the system inspected by an authorized dealer as soon as possible.
10. Oil Pressure W arning Light This light indicates low engine oil pressur e. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this light turns on.
reduces fuel ef ficiency and tire tr ead life, and may affect the vehicle’s handling and stopping ability . Please note that the TPMS is not a substitute for proper tire maintenance, and it is the d.
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call an authorized dealer- ship for service if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual.
17. 4WD LOW Mode Indicator — If Equipped This light alerts the driver that the vehicle is in the 4WD LOW mode. The front and r ear driveshafts are mechanically locked together for cing the front and rear wheels to r otate at the same speed.
21. Shift Lever Indicator The Shift Lever Indicator is self-contained within the instrument cluster . It displays the gear position of the automatic transmission. NOTE: Y ou must apply the brakes before shifting from P ARK. 22. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position.
electrical devices or increase engine speed (if at idle). If the charging system light r emains on, it means that the vehicle is experiencing a problem with the char ging system. Obtain SER VICE IMMEDIA TEL Y . See an autho- rized dealer . If jump starting is requir ed, refer to “Jump Starting Procedur es” in section 6 of this manual.
• V ehicle Information W arning Message Displays • Personal Settings (Customer-Pr ogrammable Features) • Compass Display • Outside T emperature Display • T rip Computer Functions The system .
Electronic V ehicle Information Center (EVIC) Displays When the appropriate conditions exist, the EVIC displays the following messages: • TURN SIGNAL ON • PERFORM SER VICE • DAMAGED KEY — KEY .
• HOOD/GLASS/DOORS OPEN (with graphic) • HOOD/GA TE/DOOR OPEN (with graphic) • HOOD/GA TE/DOORS OPEN (with graphic) • LIFTGLASS/DOOR OPEN (with graphic) • LIFTGLASS/DOORS OPEN (with graphic).
• MEMOR Y #1 POSITIONS SET • MEMOR Y #2 POSITIONS SET • MEMOR Y SYSTEM DISABLED — SEA TBEL T BUCK- LED (with graphic) • MEMOR Y SYSTEM DISABLED — VEHICLE NOT IN P ARK • DRIVER 1 MEMOR Y • DRIVER 2 MEMOR Y • ADJ. PEDALS DISABLED — CRUISE CONTROL SET • ADJ.
• MANUAL CLOSE TO OPERA TE (Power Liftgate Models Only) • VEHICLE NOT IN P ARK • IGNITION POSITION • PRESS BRAKE TO ST ART • INSER T KEY • TURN TO ON • ECO – Fuel Saver Indicator Engine Oil Change Indicator System Oil Change Required Y our vehicle is equipped with an engine oil change indicator system.
T rip Functions Press and r elease the MENU button until one of the following T rip Functions displays in the EVIC: • A verage Fuel Economy/Fuel Saver Mode (5.
This feature allows you to monitor when you ar e driving in a fuel efficient manner , and it can be used to modify driving habits in order to incr ease fuel economy . Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank.
and average fuel economy , according to the current fuel tank level. DTE cannot be reset thr ough the FUNCTION SELECT button. NOTE: Significant changes in driving style or vehicle loading will greatly af fect the actual drivable distance of the vehicle, regar dless of the DTE displayed value.
the FUNCTION SELECT button for two seconds. Current display will reset along with other functions Compass Display The compass readings indicate the dir ection the vehicle is facing. Press and r elease the COMP ASS/TEMPERA TURE button to display one of eight compass readings and the outside temperature.
5. Complete one or more 360–degree turns (in an ar ea free fr om large metal or metallic objects) until the “CAL” indicator turns off. The compass will now function normally . Compass V ariance Compass V ariance is the difference between Magnetic North and Geographic North.
4. Press and release the FUNCTION SELECT button to change the variance number . Continue until desired number is reached. 5. Press either MENU, SCROLL, or COMP ASS/TEMP button to set the value and exit.
opened. T o make your selection, press and release the FUNCTION SELECT button until YES (Y) or NO (N) appears. Remote Key Unlock When “Driver Door 1st Press” is selected, only the driver’s door will unlock on the first press of the Remote Keyless Entry (RKE) transmitter UNLOCK button.
Auto High Beams (A vailable with SmartBeam™ Only) When this feature is selected, the high beam headlights will deactivate automatically under certain conditions. T o make your selection, press and r elease the FUNCTION SELECT button until YES (Y) or NO (N) appears.
NOTE: The seat will return to the memorized seat location (if Recall Memory with Remote Key Unlock is set to ON) when the RKE transmitter is used to unlock the door . Refer to “Easy Entry/Exit Seat” under “Driver Memory Seat” in Section 3 of this manual for more information.
Display ECO — If Equipped The “ECO” message is located in the Compass/ T emperature display , this message can be turned on or off. T o make your selection, press and release the FUNC- TION SELECT button until “ON” or “OFF” appears.
• Y our system can be set to display pressure units in PSI, kPa, or BAR. SALES CODE (RER/REN) — AM/FM/CD/DVD RADIO – IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN and RER radios contain a CD/DVD player , USB port, and a 30-gigabyte hard drive (HDD).
T o Manually Set the Clock — RER/REN 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed. 3. T ouch the screen wher e “User Clock” is displayed. The clock setting menu will appear on the screen. 4. T o move the hour forward, touch the scr een where the word “Hour” with the arr ow pointing upward is dis- played.
Show T ime if Radio is Off When selected, this feature will display the time of day on the touch screen when the radio is turned of f. Proceed as follows to change the current setting: 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed.
SALES CODE RES — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping, until you release it. TIME Button Press the TIME button to alternate display of the time and radio frequency .
Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display .
Y ou may add a second station to each pushbutton by repeating the above pr ocedure with this exception: Pr ess the SET/RND button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory .
If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/FF Press and hold the FF (Fast Forwar d) button and the CD player will begin to fast forward until FF is r eleased, or R W or another CD button is pressed.
The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders.
rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rate. MPEG Specifi- cation Sampling Fre- quency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.
Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player , or cassette player , and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers.
Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
Phone Button uconnect™ phone — If Equipped Press this button to operate the uconnect™ phone featur e (if equipped). Refer to “uconnect™ phone” in the uconnect™ User Manual located on the DVD for further details.
INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast fr om an FM station (FM mode only). R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows.
Push the rotary TUNE/SCROLL control knob again to exit setting tone, balance, and fade. MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected.
Program T ype 16-Digit Character Display Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name.
window . Select the button (1–6) you wish to lock onto this station and press and r elease that button. If a button is not selected within five seconds after pressing the SET/ RND button, the station will continue to play but will not be stored into pushbutton memory .
Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display . If a CD does not go into the slot more than 1.
NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped). SEEK Button Press the right SEEK button for the next selection on the CD.
Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension.
Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to lo.
Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers.
This feature allows you to plug an iPod 威 into the vehicle’s sound system through a 16–pin connector , using the provided interface cable. UCI supports Mini, 4G, Photo, Nano, 5G iPod 威 and iPhone 威 devices. Some iPod 威 software versions may not fully support the UCI features.
Using This Feature By using the provided connection cable to connect an iPod 威 to the vehicle’s UCI 16–pin connector port: • The iPod 威 audio can be played on the vehicle’s sound system, providing metadata (artist, track title, album, etc.
• Jump backward in the curr ent track by pressing and holding the << RW button. Holding the << RW button long enough will take you to the beginning of the current track. • Jump forward in the curr ent track by pressing and holding the FF >> button.
• RND button (available on sales code RES radio only): Pressing this button toggles between Shuf fle ON and Shuffle OFF modes for the iPod 威 .I ft h e RND icon is showing on the radio display , then the shuffle mode is ON. List Or Browse Mode During Play mode, pressing any of the buttons described below , takes you to List mode.
• Pressing a PRESET button will display the curr ent list on the top line and the first item in that list on the second line. • T o Exit List mode without selecting a track, press the same PRESET button again to go back to Play mode . • LIST button: The LIST button will display the top level menu of the iPod 威 .
uconnect™ studios (SA TELLITE RADIO) — IF EQUIPPED (REN/RER/RES RADIOS ONL Y) Satellite radio uses direct satellite-to-r eceiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio.
Sirius ID number will display . The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. ESN/SID Access W ith REN/RER Radios While in SA T mode, press the MENU button on the radio faceplate. Next, touch the SUBSCRIPTION tab on the touch screen.
Operating Instructions - uconnect™ studios (Satellite) Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. SEEK Buttons Press and r elease the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. T oggle the MUSIC TYPE button again to select the music type. By pressing the SEEK button when the Music T ype function is active, the radio will be tuned to the next channel with the same selected Music T ype name.
pushbutton memory . The channels stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations).
The LCD screen is located on the headliner behind the front seats. REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system contr ols are located on the r ear surface of the steering wheel.
The right-hand control is a r ocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pressing the top of the r ocker switch will increase the volume, and pr essing the bottom of the rocker switch will decr ease the volume.
CD Player Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track, or to the beginning of the previous track if it is within one second after the current track begins to play .
6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatur es may become too high. NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair , moisture or dew on the disc) oversized, or have protection encoding.
The instrument panel featur es four dual-vane airflow registers. T wo registers ar e located on the outer ends of the instrument panel and two ar e located in the center of the instrument panel. These r egisters can be closed to partially block airflow , and they can be adjusted to direct airflow where the occupant desir es.
directed to the fr ont door windows through the side window demister grilles. Some airflow is delivered to the floor while in defrost so that comfort can be maintained. Defrost/Floor Air flows through the fr ont and rear floor outlets and the outlets at the base of the windshield.
Recirculation The recir culation feature can be selected with the mode control knob. Y ou may choose be- tween Bi-Level Recirculation and Panel Recir - culation air outlets while in this mode. Nor- mally , air enters from outside the vehicle. However , when in Recirculation mode air inside the vehicle is r e-used.
NOTE: The numbers on the temperature dial r epresent a comfort setting when the Mode knob is set to AUTO, and not the actual air temperature. T urn the mode control (on the right) knob to AUTO, and place the blower control (on the left) to either LO AUTO or HI AUTO.
NOTE: The temperature setting can be adjusted at any time without affecting automatic contr ol operation. How- ever , if the driver and/or passenger temperature knobs are set to the full hot or full cold positions, the air temperature out of the ducts will be full hot or full cold respectively .
• T o provide you with maximum comfort in the auto- matic mode, during cold start-ups the blower fan will remain of f until the engine warms up. However , the fan will engage immediately if the defrost mode is selected or if you manually select a blower speed.
230 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :.
NOTE: Regardless of the type of operation, when a temperature knob is set to the full clockwise or full counterclockwise position, the system will deliver full hot or full cold air out of the ducts, respectively .
Bi-Level Air flows both through the outlets located in the instrument panel and those located on the floor . Air flows through the r egisters in the back of the center console, and under the front seats to the r ear seat passengers. These registers can be closed to block airflow .
Recirculation mode to be selected while in the defr ost or defrost/floor modes. Attempting to use Recirculation while in these modes will cause the LED in the button to blink and then turn off.
NOTE: The rear climate contr ol system cannot be con- trolled fr om the front seat; it can only be turned on and off. All control of the r ear system must be performed by the rear occupants. Rear Blower Control The left knob on the Rear Control Panel has four posi- tions, “Off”, and a range of thr ee blower speeds.
Rear T emperature Control The center knob on the Rear Control Panel allows the third r ow seat occupants to have control of the r ear temperature as follows: • When the temperature knob is in the cold (Blue) position, cold air will be delivered fr om the outlets.
Regular cleaning of the inside of the windows with a non-filming cleaning solution (vinegar and water works very well) will help prevent contaminates (cigar ette smoke, perfumes, etc.) from sticking to the windows. Contaminates increase the rate of window fogging.
Operating Tips Chart 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 237 I n f o r m a t i o n P r o v i d e d b y :.
I n f o r m a t i o n P r o v i d e d b y :.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur e ..................... 2 4 3 ▫ Normal Starting ..................... 2 4 3 ▫ Extreme Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ............................ 2 4 4 ▫ If Engine Fails T o Start .
▫ Quadra-T rac II 威 Operating Instructions/ Precautions — If Equipped ............. 2 5 6 ▫ Shift Positions ...................... 2 5 7 ▫ Shifting Procedur es ................... 2 5 8 ▫ Quadra-Drive 威 II System — If Equipped .... 2 6 0 䡵 On-Road Driving T ips .
▫ Hill Start Assist (HSA) – Four-Wheel Drive Models W ith NV245 T wo–Speed T ransfer Case Only ......................... 2 8 0 ▫ Hill Descent Control (HDC) – Four -Wheel Drive Models W ith NV245 T wo–Speed T ransfer Case Only .............
▫ 3.7 Engine ......................... 3 1 4 ▫ 5.7L Engine ........................ 3 1 4 ▫ Reformulated Gasoline ................ 3 1 5 ▫ Gasoline/Oxygenate Blends ............. 3 1 5 ▫ E-85 Usage In Non-Flex Fuel V ehicles ...... 3 1 5 ▫ MMT In Gasoline .
ST ARTING PROCEDURE Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! • Never leave children alone in a vehicle.
Extreme Cold Weather (Below ⫺ 20°F or ⫺ 29°C) T o ensure reliable starting at these temperatur es, use of an externally powered electric engine block heater (avail- able from your authorized dealer) is r ecommended.
release it as soon as the starter engages. The starter motor will disengage automatically in 10 seconds. Once this occurs, release the accelerator pedal, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the “Normal Starting” pr ocedure.
AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
Brake/T ransmission Shift Interlock System This vehicle is equipped with a Brake T ransmission Shift Interlock System (BTSI) that holds the shift lever in the P ARK position when the ignition switch is in the LOCK position.
6. Move the shift lever into the NEUTRAL position. 7. The vehicle may then be started in NEUTRAL. Have your vehicle inspected by your local authorized dealer , if the shift lock manual override has been used. Five–Speed Automatic T ransmission The electronically contr olled transmission provides a precise shift schedule.
Never use P ARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. Always apply the parking brake first, then place the shift lever into the P ARK position. W ARNING! • Never use the P ARK position as a substitute for the parking brake.
Electronic Range Select (ERS)Operation The Electronic Range Select (ERS) shift contr ol allows you to move the shift lever left (-) or right (+) when the shift lever is in the DRIVE position, allowing you to limit the highest available gear .
downshift). For example, if you are in DRIVE and ar e in 3rd (dir ect) gear , when you tap the shift lever one time to the left (-), the display will show 4 (ERS 4 is direct gear). Another tap to the left (-) will shift the transmission down to ERS 3 (the added underdrive gear).
• transmission has reached normal operating temperature. NOTE: If the vehicle is started in extremely cold tem- peratures, the transmission may not shift into Over drive and will automatically select the most desirable gear for operation at this temperature.
performance and reduce the potential for transmission overheating or failur e due to excessive shifting. When operating in “TOW/HAUL” mode, the transmission will shift into direct gear and Over drive will be enabled under steady cruise conditions.
3. T urn the engine off, and be sur e to turn the key to the LOCK position. 4. W ait approximately 10 seconds, then r estart the en- gine. 5. Move the shift lever to the desired gear range. If the problem is no longer detected, the transmission will return to normal operation.
the transmission may not shift into the top Overdrive gear (normal 5th gear) until the transmission fluid and engine coolant are warm. • If the vehicle has not been driven in several days, the first few seconds of operation after shifting the trans- mission into gear may seem sluggish.
FOUR-WHEEL DRIVE OPERA TION Quadra-T rac I 姞 Operating Instructions/ Precautions — If Equipped The Quadra-T rac I 威 is a single-speed (HI range only) transfer case, which provides convenient full-time four– wheel drive. No driver interaction is requir ed.
Proper operation of four -wheel drive vehicles depends on tires of equal size, type, and cir cumference on each wheel. Any difference will adversely af fect shifting and cause damage to the transfer case. Because four-wheel drive pr ovides improved traction, there is a tendency to exceed safe turning and stopping speeds.
additional traction and maximum pulling power for loose, slippery road surfaces only . Do not exceed 25 mph (40 km/h). Shifting Procedures 4WD HI to 4WD LOW W ith the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), key ON or engine running, shift the transmission into NEUTRAL, and raise the transfer case T -handle.
“4WD LOW” indicator light in the instrument cluster will flash and go out when the shift is complete. Release the T -handle. NOTE: • If shift conditions/interlocks are not met, or a transfer cas.
5. Repeat Steps 1 to 4 to shift out of NEUTRAL. NOTE: If shift conditions/interlocks are not met, a “CHECK SHIFT PROCEDURES” message will flash from the Electronic V ehicle Information Center (EVIC). Refer to “Electronic V ehicle Information Center (EVIC)” in Section 4 of this manual.
ON-ROAD DRIVING TIPS Utility vehicles have higher ground clearance and a narrower track to make them capable of performing in a wide variety of off-r oad applications. Specific design characteristics give them a higher center of gravity than ordinary cars.
CAUTION! When driving through water , do not exceed 5 mph (8 km/h). Always check water depth before entering, as a precaution, and check all fluids afterward. Driv- ing through water may cause damage that may not be covered by the new vehicle limited warranty .
Driving in Snow , Mud and Sand In heavy snow , when pulling a load, or for additional control at slower speeds, shift the transmission to a low gear and shift the transfer case to 4WD LOW if necessary . Refer to “Four-Wheel Drive Operation” in this section.
If the wheels start to slip as you approach the cr est of a hill, ease off the accelerator and maintain forwar d motion by turning the front wheels slowly . This may provide a fresh “bite” into the surface and will usually pr ovide traction to complete the climb.
• After extended operation in mud, sand, water , or similar dirty conditions, have brake rotors, wheels, brake linings, and axle yokes inspected and cleaned as soon as possible. W ARNING! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking.
W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible.
apparent, and/or the system is not functioning as antici- pated. Coordinate inspection ef forts through an autho- rized dealer . W ARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to ensure accurate fluid level reading.
Be sure the parking brake is firmly set when parked and the shift lever is in the P ARK position. When parking on a hill, you should apply the parking brake before placing the shift lever in P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of P ARK.
When parking on a hill, turn the front wheels towar d the curb on a downhill grade, and away from the curb on an uphill grade. The parking brake should always be applied whenever the driver is not in the vehicle.
W ARNING! • Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an accident. Pumping makes the stopping distance longer .
• Do not “ride” the brakes by resting your foot on the pedal. This could overheat the brakes and r esult in unpredictable braking action, longer stopping dis- tances, or brake damage. • When descending mountains or hills, repeated brak- ing can cause brake fade with loss of braking control.
ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equipped with an advanced electronic brake control system that includes the Anti-Lock Brake System (ABS), T raction Control System (TCS), Brake Assist System (BAS), Electronic Roll Mitigation (ERM), and Electronic Stability Pr ogram (ESP).
T raction Control System (TCS) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to pr ovide enhanced acceleration and stability .
W ARNING! The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The BAS cannot prevent accidents, including those re- sulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
W ARNING! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur . ERM cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles.
“ESP/TCS Indicator Light” begins to flash during accel- eration, ease up on the accelerator and apply as little throttle as possible. Be sur e to adapt your speed and driving to the prevailing r oad conditions.
Partial Of f This mode is entered by momentarily pr essing the “ESP OFF” switch. When in “Partial Off” mode, the TCS portion of ESP , except for the “limited slip” feature described in the TCS section, has been disabled and the “ESP/TCS Indicator Light” will be illuminated.
mode is overcome, turn ESP back on by momentarily pressing the “ESP OFF” switch. This may be done while the vehicle is in motion. Full Of f (Four-Wheel Drive Models Only) This mode is intended for off-highway or of f-road use when ESP stability featur es could inhibit vehicle maneu- verability due to trail conditions.
W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP and ERM are unavailable. In an emergency evasive maneuver , the ESP and ERM systems will not engage to assist in maintaining stability . The “Full Off” ESP mode is intended for off-road use only .
W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP and ERM are unavailable. In an emergency evasive maneuver , the ESP and ERM systems will not engage to assist in maintaining stability . The “Full Off” mode is intended for off- road use only .
period of time after the driver takes their foot off of the brake pedal. If the driver does not apply the throttle during this short period of time, the system will release brake pressur e and the vehicle will roll down the hill.
W ARNING! • If you use a trailer brake controller with your trailer , your trailer brakes may be activated and deactivated with the brake switch. If so, when the brake pedal is released, there may not be enough brake pressure to hold the vehicle and trailer on a hill and this could cause a collision with another vehicle or object behind you.
Hill Descent Control (HDC) – Four-Wheel Drive Models With NV245 T wo–Speed T ransfer Case Only HDC maintains vehicle speed while descending hills during off-r oad driving situations and is available in 4WD LOW range only . T o enable HDC (transfer case must be in 4WD LOW range), press the HDC switch.
and will only activate when the vehicle is descending a hill. It will usually not activate on level ground. The HDC speed may be adjusted by the driver to suit the driving conditions. The speed corresponds to the trans- mission gear selected. • 1st = 1 mph (1.
W ARNING! HDC is only intended to assist the driver in control- ling vehicle speed when descending hills. The driver must remain attentive to the driving conditions and is responsible for maintaining a safe vehicle speed.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards.
T ires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- tion. Example: T145/80D18 103M. • High flotation tire sizing is based on U.S. design standards and it begins with the tir e diameter molded into the sidewall.
EXAMPLE: 15 = Rim diameter in inches (in) Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard te.
NOTE: Under a maximum loaded vehicle condition, gross axle weight ratings (GA WRs) for the front and rear axles must not be exceeded. For further information on GA WRs, vehicle loading, and trailer towing, refer to “V ehicle Loading” in this section.
6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
5 ST ARTING AND OPERA TING 293 I n f o r m a t i o n P r o v i d e d b y :.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread.
CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage it. Inflation pressur es specified on the placard ar e always cold tire inflation pr essure.
Tire Pressures For High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tir e inflation pressur e is very important.
W ARNING! T emporary use spare tires are for emergency use only . W ith these tires, do not drive more than 50 mph (80 km/h). T emporary use spare tires have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck, and do not let anyone near a spinning wheel no matter what the speed.
Life of Tire The service life of a tire is dependent upon various factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
• For vehicles equipped with 18 inch wheels, do not install tire chains or traction devices on tir es larger than 235/60R18XL. T ires larger than this may not provide suf ficient body clearance with chains or other traction devices.
NOTE: The premium T ire Pr essure Monitor System will automatically locate the pressur e values displayed in the correct vehicle position following a tir e rotation. The suggested rotation method is the “forwar d-cross” shown in the following diagram.
The TPMS will warn the driver of a low tire pr essure if the tire pr essure falls below the low pr essure warning threshold for any r eason, including low temperature effects, or natural pr essure loss thr ough the tire.
CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style.
• Seasonal temperature changes will af fect tire pr essure, and the TPMS will monitor the actual tire pr essure in the tire. Base System The T ire Pressur e Monitor System (TPMS) uses wireless technology with wheel rim-mounted electronic sensors to monitor tire pr essure levels.
pressur es have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information. The T ire Pressur e Monitoring T elltale Light will flash on and off for 75 seconds, and r emain on solid when a system fault is detected.
• If your vehicle is not equipped with a matching full-size spare wheel and tir e assembly , it does not have a tire pr essure monitoring sensor in the spar e tire.
The T ire Pressur e Monitor System (TPMS) consists of the following components: • Receiver Module • Four T ire Pressur e Monitoring Sensors • Three T rigger Modules (mounted in three of the four.
NOTE: Y our system can be set to display pressure units in PSI, kPa, or BAR. Should a low tire condition occur on any of the four active road tir e(s), you should stop as soon as possible, and inflate the low tire(s) that is “flashing” on the graphic display to the vehicle’s recommended cold tir e pressur e.
If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the T ire Pressur e Monitoring T elltale Light will no longer flash, the ⬙ CHECK TPM SYSTEM ⬙ message will not be present, and a pr essure value will be displayed instead of dashes.
received fr om the TPM Sensors. However , the system still needs to be serviced as long as the ⬙ CHECK TPM SYSTEM ⬙ message exists. NOTE: • If your vehicle is equipped with a matching full-size spare wheel and tir e assembly , it has a tire pressur e monitoring sensor , and can be monitored by the T ire Pressur e Monitoring System (TPMS).
T ire Pressur e Monitoring T elltale Light will flash on and off for 75 seconds and then r emain on solid, and the EVIC will display a ⬙ CHECK TPM SYSTEM ⬙ message for three seconds and then display dashes (- -) in place of the pressur e value.
FUEL REQUIREMENTS 3.7 Engine All engines (except 5.7L engines) are de- signed to meet all emissions regulations and provide excellent fuel economy and performance when using high-quality un- leaded “regular” gasoline having an oc- tane rating of 87.
Reformulated Gasoline Many areas of the country r equire the use of cleaner burning gasoline referr ed to as “Reformulated Gasoline.” Reformulated gasoline contains oxygenates, and are spe- cifically blended to reduce vehicle emissions and im- prove air quality .
• OBD II “Malfunction Indicator Light” on • poor engine performance • poor cold start and cold drivability • increased risk for fuel system component corr osion T o fix a Non-FFV vehicle i.
conditions and would result in additional cost. Ther efore, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law .
• Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed ar ea, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impu- rities into the fuel system. Also, a poorly fitting aftermarket cap can cause the “Malfunction Indi- cator Light” (MIL) to illuminate, due to fuel vapors escaping from the system.
Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “CHECK GASCAP” message will be displayed in the EVIC (Electronic V ehicle Information Center). Refer to “Electronic V ehicle Information Center” in Section 4 of this manual.
This label contains the month and year of manufacture, Gross V ehicle W eight Rating (GVWR), Gross Axle W eight Rating (GA WR) front and r ear , and V ehicle Identification Number (VIN). A Month-Day-Hour (MDH) number is included on this label and indicates the month, day , and hour of manufacture.
Inflation Pressure This is the cold tire inflation pr essure for your vehicle for all loading conditions up to full GA WR. Curb W eight The curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants or cargo loaded into the vehicle.
CAUTION! Do not load your vehicle any heavier than the GVWR or the maximum front and rear GA WR. If you do, parts on your vehicle can break, or it can change the way your vehicle handles. This could cause you to lose control. Also, overloading can shorten the life of your vehicle.
Gross Combination W eight Rating (GCWR) The GCWR is the total permissible weight of your vehicle and trailer when weighed in combination. NOTE: The GCWR rating includes a 150 lbs (68 kg) allowance for the presence of a driver . Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles.
W eight-Distributing Hitch A weight-distributing hitch system works by applying leverage through spring (load) bars. They ar e typically used for heavier loads, to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer axle(s).
W ithout W eight-Distributing Hitch (Incorrect) W ith W eight-Distributing Hitch (Correct) 326 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :.
T railer Hitch Classification Y our vehicle may be factory equipped for safe towing of trailers weighing over 3,500 lbs (1 587 kg) with the optional T railer T ow Prep Package.
All trailer hitches should be professionally installed on your vehicle. T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine Model GCWR (Gross Com- bined Wt.
NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight refer enced on the T ire and Loading Information placard. Refer to the “T ire– Safety Information” section in this manual.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be considered as part of the total load on your vehicle.
• When hauling cargo or towing a trailer , do not over- load your vehicle or trailer . Overloading can cause a loss of control, poor performance or damage to brakes, axle, engine, transmission, steering, suspension, chas- sis structur e or tires. • Safety chains must always be used between your vehicle and trailer .
− Check the trailer tires for pr oper tire inflation pr es- sures befor e trailer usage. − Check for signs of tire wear or visible tir e damage before towing a trailer . Refer to “T ires–General Infor - mation” in this section. − When replacing tir es, refer to “T ires–General Informa- tion” in this section.
W ARNING! • Do not connect trailer brakes to your vehicle’s hydraulic brake lines. It can overload your brake system and cause it to fail. Y ou might not have brakes when you need them and could have an accident. • T owing any trailer will increase your stopping distance.
Four-Pin Connector 1 — Female Pins 4 — Park 2 — Male Pin 5 — Left Stop/T urn 3 — Ground 6 — Right Stop/T urn Seven-Pin Connector 1 — Battery 5 — Ground 2 — Backup Lamps 6 — Left St.
T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. Automatic T ransmission The DRIVE range can be selected when towing. How- ever , if frequent shifting occurs while in this range, the TOW/HAUL mode (if equipped) or a lower gear range should be selected.
Cooling System T o reduce potential for engine and transmission over- heating, take the following actions: − City Driving When stopped for short periods of time, shift the trans- mission into NEUTRAL and increase engine idle speed. − Highway Driving Reduce speed.
T owing — Quadra-T rac I 姞 (Single-Speed T ransfer Case) Four-Wheel Drive Models Recreational towing is not allowed. This model does not have a NEUTRAL position in the transfer case. T owing — Quadra–T rac II 姞 /Quadra–Drive 姞 II Four-Wheel Drive Models CAUTION! Front or rear wheel lifts should not be used.
complete. A “4WD SYSTEM IN NEUTRAL” message will display on the EVIC (Electronic V ehicle Information Center). Refer to “Electronic V ehicle Information Center (EVIC)” in Section 4 of this manual. 5. Start the engine. 6. Shift the transmission into DRIVE.
CAUTION! T ransmission damage may occur if the transmission is shifted into P ARK with the transfer case in NEU- TRAL and the engine running. W ith the transfer case in NEUTRAL ensure that the engine is OFF prior to shifting the transmission into P ARK (refer to steps 7 and 8 above).
5. Shift the transmission into P ARK. 6. Start the engine. 7. Shift the transmission into DRIVE. NOTE: When shifting out of transfer case NEUTRAL, turning the engine OFF may be requir ed to avoid gear clash.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flashers ................ 3 4 2 䡵 If Y our Engine Overheats ................ 3 4 2 䡵 Jacking And T ire Changing ............... 3 4 3 ▫ Jack Location ....................... 3 4 4 ▫ Spare T ire Stowage .
HAZARD W ARNING FLASHERS The Hazard W arning flasher switch is located on the switch bank just above the climate controls. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency .
NOTE: There ar e steps that you can take to slow down an impending overheat condition: • If your air conditioner (A/C) is on, turn it off. The A/C system adds heat to the engine cooling system and turning the A/C off can help r emove this heat.
Jack Location The scissor-type jack and tir e changing tools are located in a compartment behind the third r ow seat. Refer to “Cargo Area Features” in Section 3 for further informa- tion. Spare Tire Stowage The spare tir e is stowed under the rear of the vehicle by means of a cable winch mechanism.
Spare Tire Removal Fit the jack handle extension over the drive nut. Use the lug wrench to r otate the nut counterclockwise until the spare is on the gr ound with enough slack in the cable to allow pulling the tire out fr om under the vehicle. CAUTION! The winch mechanism is designed for use with the jack extension tube only .
W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough of f the road to avoid being hit when operating the jack or changing the wheel. 2. Set the parking brake. 3. Place the shift lever into P ARK 4.
W ARNING! (Continued) • Never start or run the engine with the vehicle on a jack. • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. • Only use the jack in the positions indicated and for lifting this vehicle during a tire change.
4. Locate the jack as shown. For the front axle, place it under the front lower contr ol arm. Do not raise the vehicle until you are sure the jack is fully engaged. For the rear axle, place it under the axle near the wheel to be changed. Ensure the jack is closest to the inside of the wheel when jacking on the rear axle.
5. Raise the vehicle by turning the jack screw clockwise. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tir e. Minimum tire lift pr ovides maximum stability . W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable.
9. Finish tightening the lug nuts. Push down on the wrench while tightening for incr eased leverage. Alternate nuts until each nut has been tightened twice. The correct wheel nut tightness is 95 ft lbs (130 N·m). If in doubt about the correct tightness, have them checked with a torque wr ench by your authorized dealer or at a service station.
JUMP-ST ARTING If the vehicle has a discharged battery , booster cables may be used to obtain a start from a booster battery or the battery in another vehicle. This type of start can be dangerous if done impr operly , so follow this procedure carefully .
3. T urn off the heater , radio and all unnecessary electrical loads. 4. Connect one end of a jumper cable to the positive terminal of the booster battery .
W ARNING! Any procedure other than above could result in: • Personal injury caused by electrolyte squirting out the battery vent. • Personal injury or property damage due to battery explosion. CAUTION! Any procedure other than above could result in damage to the charging system of the booster vehicle or of the immobilized vehicle.
TOWING A DISABLED VEHICLE 2–Wheel Drive Models Only Provided the transmission is operable, tow only in NEU- TRAL at speeds not exceeding 30 mph (48 km/h), for distances of not more than 15 miles (24 km). CAUTION! T owing at more than 30 mph (48 km/h) or for more than 15 miles (24 km), can cause severe transmission damage.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment – 3.7L .............. 3 5 7 䡵 Engine Compartment – 5.7L .............. 3 5 8 䡵 Onboard Diagnostic System – OBD II ....... 3 5 9 ▫ Loose Fuel Filler Cap Message ........... 3 5 9 䡵 Emissions Inspection And Maintenance Programs .
▫ Cooling System ..................... 3 7 4 ▫ Brake System ....................... 3 7 9 ▫ Front/Rear Axle Fluid ................. 3 8 1 ▫ T ransfer Case ....................... 3 8 2 ▫ Automatic T ransmission ............... 3 8 3 ▫ Maintenance After Off-Road Driving .
ENGINE COMP ARTMENT – 3.7L 1 — Engine Coolant Reservoir 6 — W asher Fluid Reservoir 2 — Engine Oil Dipstick 7 — Battery 3 — Brake Fluid Reservoir 8 — Engine Oil Fill 4 — Power Distribu.
ENGINE COMP ARTMENT – 5.7L 1 — Engine Coolant Reservoir 7 — W asher Fluid Reservoir 2 — Automatic T ransmission Dipstick 8 — Battery 3 — Engine Oil Fill 9 — Engine Oil Dipstick 4 — Bra.
ONBOARD DIAGNOSTIC SYSTEM – OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
The message will remain displayed until the vehicle diagnostic system can retest the fuel system. The test will perform the next time the vehicle is started, if the vehicle was keyed off above 40°F (4°C) outside temperatur e and the following vehicle start is above 40°F (4°C) outside temperature.
2. T urn the ignition to the ON position, but do not crank or start the engine. 3. If you crank or start the engine, you will have to start this test over . 4. As soon as you turn your key to the ON position, you will see the MIL symbol come on as part of a normal bulb check.
REPLACEMENT P ARTS Use of genuine MOP AR 威 parts for normal/scheduled maintenance and repairs is highly r ecommended to en- sure the designed performance. Damage or failur es caused by the use of non-MOP AR 威 parts for maintenance and repairs will not be cover ed by the manufacturer’s warranty .
CAUTION! • Failure to properly maintain your vehicle or per- form repairs and service when necessary could result in more costly repairs, damage to other components or negatively impact vehicle perfor- mance. Immediately have potential malfunctions examined by an authorized Chrysler Group LLC dealership or qualified repair center .
CAUTION! Overfilling or underfilling the crankcase will cause aeration or loss of oil pressure. This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance.
Engine Oil V iscosity SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil impr oves low temperature starting and vehicle fuel economy . The engine oil filler cap also shows the recommended engine oil viscosity for your vehicle.
environment. Contact your local authorized dealer , ser- vice station, or governmental agency for advice on how and where used oil and oil filters can be safely discar ded in your area. Engine Oil Filter The engine oil filter should be replaced with a new filter at every oil change.
Maintenance-Free Battery Y our vehicle is equipped with a maintenance-free battery . Y ou will never have to add water , nor is periodic main- tenance requir ed. W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin or clothing.
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test.
NOTE: Use only manufacturer appr oved A/C System Sealers, Stop Leak Products, Seal Conditioners, Compr es- sor Oil, and Refrigerants. Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydr ofluoro- carbon (HFC) that is endorsed by the Environmental Protection Agency (EP A) and is an ozone-saving product.
Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. A void using the wiper blades to wipe frost or ice from the windshield.
W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
CAUTION! The catalytic converter requires the use of unleaded fuel only . Leaded gasoline will destroy the effective- ness of the catalyst as an emissions control device and may seriously reduce engine performance and cause serious damage to the engine.
W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.
Cooling System W ARNING! Y ou or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator . If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator or coolant bottle is hot.
Cooling System — Drain, Flush, and Refill If the engine coolant (antifreeze) is dirty and contains a considerable amount of sediment, clean and flush with reliable cooling system cleaner . Follow with a thorough rinsing to remove all deposits and chemicals.
CAUTION! (Continued) • This vehicle has not been designed for use with Propylene Glycol-based engine coolant (anti- freeze). Use of Propylene Glycol-based engine coolant (antifreeze) is not recommended. Adding Coolant Y our vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals.
Please note that it is the owner’s responsibility to main- tain the proper level of pr otection against freezing ac- cording to the temperatur es occurring in the area wher e the vehicle is operated.
rules for your community . T o prevent ingestion by ani- mals and children, do not stor e ethylene glycol-based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the gr ound. If ingested by a child or pet, seek emergency assistance immediately .
• Do not overfill the coolant recovery bottle. • Check the engine coolant (antifreeze) fr eeze point in the radiator and in the coolant recovery bottle. If engine coolant (antifreeze) needs to be added, contents of coolant recovery bottle must also be pr otected against freezing.
W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Y ou would not have your full braking capacity in an emergency .
W ARNING! (Continued) • T o avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container . Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point.
Selection of Lubricant Use only the manufacturer’s r ecommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.
Automatic T ransmission Selection of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission perfor - mance. Use only the manufacturer’s r ecommended trans- mission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.
CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- nents. Such damage is not covered by the New V ehicle Limited W arranty . Fluid Level Check (3.7L Engine) Regular fluid level checks are not r equired.
Fluid Level Check (5.7L Engine) Check the fluid level while the transmission is at normal operating temperature. This occurs after at least 15 miles (25 km) of driving. At normal operating temperature the fluid cannot be held comfortably between the fingertips.
CAUTION! Be aware that if the fluid temperature is below 50°F (10°C) it may not register on the dipstick. Do not add fluid until the temperature is elevated enough to produce an accurate reading.
CAUTION! Under frequent heavy-duty driving conditions, change all lubricants, and lubricate body compo- nents, all driveline joints and steering linkage more often than in normal service, to prevent excessive wear .
• If insects, tar , or other similar deposits have accumu- lated on your vehicle, use MOP AR 威 Super Kleen Bug and T ar Remover or equivalent to remove. • Use a high quality cleaner wax, such as MOP AR 威 Cleaner W ax to remove road film, stains, and to protect your paint finish.
• If your vehicle is damaged due to an accident or similar cause which destroys the paint and pr otective coating, have your vehicle repair ed as soon as pos- sible. The cost of such repairs is consider ed the respon- sibility of the owner . • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc.
• For tough stains, apply MOP AR 威 T otal Clean or a mild soap solution to a clean, damp cloth and remove the stain. Use a fresh, damp towel to r emove soap residue. • For grease stains, apply MOP AR 威 Multi-Purpose Cleaner or equivalent to a clean, damp cloth and remove the stain.
W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas, they may cause respiratory harm. Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights.
2. Dry with a soft tissue. Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage will also weaken the fabric. If the belts need cleaning, use MOP AR 威 T otal Clean, a mild soap solution, or lukewarm water .
Cav- ity Cartridge Fuse Mini-Fuse Description 3 10 Amp Red Htd Mirror (EBL) 4 20 Amp Y ellow Rr Pwr Out (B+) 5 10 Amp Red Rr HV AC (R/O) (Commander Only) 6 Spare (B+) 7 20 Amp Y ellow Door Locks (B+) .
Cav- ity Cartridge Fuse Mini-Fuse Description 14 20 Amp Y ellow Cigar Ltr (R/A) 15 10 Amp Red T ire Pressur e T ran- sponders (R/O) 16 10 Amp Red Upper & Lower Switch Bank, Diag.
Underhood Fuses (Power Distribution Center) Cav- ity Cartridge Fuse Mini-Fuse Description 1 50 Amp Red PTC Heater 1 (Diesel Only) Cav- ity Cartridge Fuse Mini-Fuse Description 2 40 Amp Green HID Headl.
Cav- ity Cartridge Fuse Mini-Fuse Description 10 — Spare 1 1 40 Amp Green HV AC Blower 12 30 Amp Pink Rear W iper , Ign R/O 13 40 Amp Green Rear W indow De- froster (EBL)/Heated Mirror 14 30 Amp Pin.
Cav- ity Cartridge Fuse Mini-Fuse Description 26 15 Amp Blue Brake Lamps 27 20 Amp Y ellow HD W asher (If Equipped) (Export Only) 28 30 Amp Green ABS V alves 29 20 Amp Y ellow PCM Batt (Gasoline Only).
Cav- ity Cartridge Fuse Mini-Fuse Description 43 25 Amp Natural Coils, Actuators 44 — Spare Underhood Fuses (Integrated Power Module) Cav- ity Cartridge Fuse Mini-Fuse Description 8 10 Amp Red Lt Pa.
Cav- ity Cartridge Fuse Mini-Fuse Description 17 20 Amp Y ellow Rear Fog Lamps (Ex- port Only) 18 20 Amp Y ellow Front Contr ol Module (FCM) Batt #1 19 20 Amp Y ellow Lt T railer-T ow Stop/ T urn 20 2.
VEHICLE STORAGE If you are leaving your vehicle dormant for mor e than 21 days you may want to take steps to protect your battery . Y ou may: • Remove fuse #27 in the Intelligent Power Module labeled Ignition-Off Draw (IOD#1). • Or , disconnect the negative cable from the battery .
NOTE: Numbers refer to commer cial bulb types that can be purchased fr om your authorized dealer . If a bulb needs to be replaced, visit your authorized dealer or refer to the applicable Service Manual. BULB REPLACEMENT Head Lamp 1. Open the hood. 2. Disconnect the electrical connector .
CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Front T urn Signal 1. T urn the steering wheel all the way to the left or right.
4. T urn the socket on the bottom of the front lamp unit housing 1/4 turn counterclockwise to unlock it. 5. Pull the socket and bulb straight out from the opening in the housing. 6. Disconnect the electrical connector . 7. Pull the base of the bulb straight out of the socket.
2. Reach into the front wheel house ahead of the front wheel to unsnap and lift the cover over the access hole in the front of the wheel house splash shield. Access to the bulb can be gained through the wheel liner hole. 3. Reach through the access hole to access the back of the front fog lamp housing on the back of the fr ont fascia.
3. Pull the outboard side of the rear lamp unit r earward far enough to unsnap the two ball studs on the outboard side of the lamp housing from the two plastic gr ommets in the quarter outer panel. Pull the lamp unit rearwar d far enough away to access the bulbs.
5. Disconnect the electrical connector . 6. Pull the socket and bulb straight out from the opening in the housing. 7. Pull the base of the bulb straight out of the socket. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life.
FLUIDS AND CAP ACITIES U.S. Metric Fuel (Approximate) 21 Gallons 79 Liters Engine Oil with Filter 3.7 Liter Engine (SAE 5W -20, API Certified) 5 Quarts 4.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hy- brid Organic Additive T echnology) or equivalent. Engine Oil Use API Certified SAE 5W -20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR 威 A TF+4 Automatic T ransmission Fluid or equivalent. T ransfer Case (NV140 Single Speed Only) MOP AR 威 A TF+4 Automatic T ransmission Fluid or equivalent. T ransfer Case (NV245 T wo Speed Only) MOP AR 威 NV 247/245 T ransfer Case Lubricant or equivalent.
I n f o r m a t i o n P r o v i d e d b y :.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 1 2 䡵 Maintenance Schedule .................. 4 1 2 ▫ Required Maintenance Intervals .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system.
• Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10,000 km) or 6 months, whichever comes first. Y our authorized dealer will reset the oil change indicator message after completing the scheduled oil change.
At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle. Required Maintenance Intervals Refer to the Maintenance Schedules on the following pages for the requir ed maintenance intervals.
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.
30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (3.7L and 5.7L Engines). ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.
42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.
60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the ignition cables (3.
66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (3.7L and 5.7L Engines). ❏ Inspect and replace PCV valve if necessary.
96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the ignition cables (3.7L Engine). ❏ Replace the spark plugs (3.
132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
† This maintenance is recommended by the manufactur er to the owner , but is not requir ed to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
I n f o r m a t i o n P r o v i d e d b y :.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 3 3 ▫ Prepar e For The Appointment ........... 4 3 3 ▫ Prepar e A List ...................... 4 3 3 ▫ Be Reasonable W ith Requests .
䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 3 9 ▫ T readwear ......................... 4 3 9 ▫ T raction Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center .
W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience.
If NHTSA r eceives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and r emedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer .
NOTE: A street address is r equired when or dering manuals (no P .O. Boxes). • Service Manuals These comprehensive Service Manuals pr ovide the information that students and professional technicians need in diagnosing/troubleshooting, pr oblem solving, maintaining, servicing, and repairing Chrysler Gr oup LLC vehicles.
Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orldwide W eb at: • www .techauthority .com DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration.
W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
INDEX 10 I n f o r m a t i o n P r o v i d e d b y :.
ABS (Anti-Lock Brake System) .............. 2 6 9 Adding Fuel ........................... 3 1 8 Adjustable Pedals ........................ 1 1 7 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 366 Air Conditioner Maintenance ............... 3 6 8 Air Conditioning .
Fluid T ype ........................... 3 8 3 Special Additives ...................... 3 8 3 T orque Converter ...................... 2 5 4 Autostick ............................. 2 5 0 Auxiliary Electrical Outlet (Power Outlet) ...... 1 4 0 Auxiliary Power Outlet .
Cargo Load Floor ........................ 1 4 7 Cargo (V ehicle Loading) ................... 3 2 0 Cellular Phone ........................ 85,223 Center High Mounted Stop Light ............ 4 0 6 Certification Label ....................... 3 2 0 Chains, T ire .
Pressur e Cap ......................... 3 7 7 Radiator Cap ......................... 3 7 7 Selection of Coolant (Antifreeze) ......... 375,407 Courtesy Lights ......................... 1 1 1 Cruise Light ........................... 1 6 8 Cupholders ..
Electronic Roll Mitigation (ERM) ............. 2 7 4 Electronic Speed Contr ol (Cruise Contr ol) ....... 1 1 9 Electronic Stability Pr ogram (ESP) ............ 2 7 5 Electronic Thr ottle Control W arning Light ...... 1 6 9 Electronic V ehicle Information Center (EVIC) .
Exhaust Gas Caution .............. 38,74,317,371 Exhaust System ....................... 74,371 Extender , Seat Belt ........................ 4 8 Exterior Finish Care ...................... 3 8 7 Exterior Lights .......................... 7 6 Filters Air Cleaner .
Gasoline ............................ 3 1 4 Gauge .............................. 1 6 9 Materials Added ....................... 3 1 6 Octane Rating ........................ 3 1 4 Requirements ......................... 4 0 7 Saver Mode .................
Heated Seats .......................... 90,91 Heater , Engine Block ..................... 2 4 5 High Beam Indicator ..................... 1 6 1 High Beam/Low Beam Select (Dimmer) Switch . . 1 1 1 Hill Descent Control ..................... 2 8 3 Hill Start Assist .
Key , Sentry (Immobilizer) ................... 1 7 Key-In Reminder ......................... 1 7 Keyless Entry System ...................... 2 1 Keys ................................. 1 4 Knee Bolster ............................ 5 0 Lane Change Assist .
Headlight Switch ...................... 1 0 5 Headlights ........................... 4 0 1 Headlights On W ith W ipers ............... 1 0 6 High Beam Indicator .................... 1 6 1 Illuminated Entry ....................... 2 0 Instrument Cluster .
Luggage Rack (Roof Rack) ................. 1 5 0 Lumbar Support ......................... 8 7 Maintenance Free Battery .................. 3 6 7 Maintenance Procedur es ................... 3 6 2 Maintenance Schedule .................... 4 1 2 Malfunction Indicator Light (Check Engine) .
Oil, Engine ............................ 3 6 3 Capacity ............................ 4 0 7 Change Interval ....................... 3 6 4 Dipstick ............................. 3 6 3 Disposal ............................ 3 6 5 Filter ..................
Inverter ............................. 1 4 3 Lift Gate ............................. 3 5 Mirrors .............................. 8 4 Outlet (Auxiliary Electrical Outlet) .......... 1 4 0 Seats ................................ 8 8 Steering .............
Reformulated Gasoline .................... 3 1 5 Refrigerant ............................ 3 6 9 Reminder , Lights On ..................... 1 1 0 Reminder , Seat Belt ....................... 4 7 Remote Control Starting System ........................ 2 6 Remote Keyless Entry (RKE) .
Pretensioners .......................... 4 6 Reminder ............................ 1 6 8 Shoulder Belt Anchorage ................. 4 4 Seats ................................. 8 5 Adjustment ........................... 8 6 Cleaning ....................
Snow Plow ............................ 3 3 6 Spare T ire .......................... 297,344 Specifications Fuel (Gasoline) ........................ 3 1 4 O i l ................................ 3 6 4 Speed Control (Cr uise Control) .............. 1 1 9 Speedometer .
T ire Identification Number (TIN) ............. 2 8 9 T ire Markings .......................... 2 8 6 T ire Safety Information .................... 2 8 6 T i r e s ............................ 76,294,439 Air Pressur e .......................... 2 9 5 Chains .
Cooling System T ips .................... 3 3 6 Hitches ............................. 3 2 7 Minimum Requirements ................. 3 3 0 T railer and T ongue W eight ............... 3 2 9 W iring .............................. 3 3 3 T railer T owing Guide .
V oice Recognition System (VR) ............... 8 5 W arning Flasher , Hazard .................. 3 4 2 W arning, Roll Over ........................ 5 W arnings and Cautions ..................... 8 W arranty Information ..................... 4 3 6 W ashers, W indshield .
An important point after buying a device Jeep Commander (2010) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jeep Commander (2010) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jeep Commander (2010) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jeep Commander (2010) you will learn all the available features of the product, as well as information on its operation. The information that you get Jeep Commander (2010) will certainly help you make a decision on the purchase.
If you already are a holder of Jeep Commander (2010), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jeep Commander (2010).
However, one of the most important roles played by the user manual is to help in solving problems with Jeep Commander (2010). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jeep Commander (2010) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
