Instruction/ maintenance manual of the product 50-0283x-017 SERIES Jeep
Go to page of 6
INSTALLATION INSTRUCTIONS FOR 50 - 0283x - 017 SERIES 1181323 50 - 0283x - 018 SERIES 1181328 50 - 0283x - 019 SERIES 1181325 JEEP GRAND CHEROKEE VIDEO CASSETTE PLAYER HOUSIN G These instructions are intended for use only by experienced professionals in the automotive customizing business.
2 ITEM Description QTY 1 SCREW, # 8 X 3/4" PPH 4 1 2 WELL NUT, 10 - 32 2 2 3 SCREW, 10 - 32 x 1" PPH 2 3 4 WASHER, # 10 2 5 SCREW, # 10 X 1/2" HWH 4 4 6 SCREW, # 8 X 9/16" PWH 8 5 7 CD/VCP MOUNTING BRACKET 1 8 HOUSING MOUNTING BRKT.
3 IF VECHICLE IS NOT EQUIPPED WITH A FACTORY 10 DISC CD CHANGER, PROCEED TO STEP 5. 1. Locate the O.E.M. CD changer housing mounted to the rear passenger side of vehicle. Remove and discard (4) four screws. Remove and discard housing by moving it upward and outward.
4 5. Locate the O.E .M. storage pocket mounted to the rear passenger side of vehicle. Remove and discard pocket by moving it upward and outward. See figure 4. 6. Using a pin router, razor knife, or suitable tool, carefully trim plastic panel as shown t o allow clearance for VCP bracket.
5 8. Route video and audio cables to rear passenger side VCP location. See Figure 7. II. PREPARATION OF COMPONENTS FOR INSTALLATION 9. Remove and discard (2) two screws which secure mounting bracket (item 7 pg. 2) to housing. Insert CD changer (if equipped ) into mounting bracket and secure in original manner using (6) six O.
6 IF VECHICLE IS EQUIPPED WITH A FACTORY 10 DISC CD CHANGER, PROCEED TO STEP 16. 13. Align top holes in VCP mounting bracket (item 7 pg 2 ) with holes in vehicle. See Figure 11. 14. Insert (2) two well nuts (item 2 pg 2) into top holes and secure using (2) 10 - 32 x 1" screws (item 3 pg 2) and (2) two # 10 washers (item 4 pg 2).
An important point after buying a device Jeep 50-0283x-017 SERIES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jeep 50-0283x-017 SERIES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jeep 50-0283x-017 SERIES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jeep 50-0283x-017 SERIES you will learn all the available features of the product, as well as information on its operation. The information that you get Jeep 50-0283x-017 SERIES will certainly help you make a decision on the purchase.
If you already are a holder of Jeep 50-0283x-017 SERIES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jeep 50-0283x-017 SERIES.
However, one of the most important roles played by the user manual is to help in solving problems with Jeep 50-0283x-017 SERIES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jeep 50-0283x-017 SERIES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
