Instruction/ maintenance manual of the product SCS-SAT500 JBL
Go to page of 8
INCLUDED THANK Y OU FOR CHOOSING JBL For more than 60 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office.
SCS SA T500, SCS SA T300 Maximum Recommended Amplifier Power 100 W atts Power Handling (Continuous/Peak) 50W/200W Nominal Impedance 8 Ohms Sensitivity 88dB @ 1 W att/1 meter Frequency Response 100Hz .
MOUNTING OPTIONS On a shelf. On the wall. A wall bracket is included. On an optional stand. 2 SPEAKER PLACEMENT † 1.5 – 1.8m 5 – 6 ft † FRONT SPEAKERS SURROUND SPEAKERS The SCS SA T500, SCS SA T300 and the SCS SA T200 loud- speakers are designed to be used either singly or in a pair to upgrade a 5.
3 Prepare the speaker wire as described on Page 5. Thread the two conductors through the two holes in the stand bracket. Make sure to pre- serve the proper polarity (+ and – connections) by threading the positive con- ductor through the hole on the left, and the negative conductor through the hole on the right looking at the stand from the front.
4 Important Safety Note: The customer is solely responsi- ble for proper selection of mounting hardware not included with the speaker , and for proper assembly and installation of the wall- mount bracket, including but not limited to the selection of appropriate weight-bearing supports and proper use of the bracket.
5 CONNECTION TIPS SPEAKER CONNECTIONS Separate and strip the ends of the speaker wire as shown. The wires sup- plied with the system may already be stripped and tinned for easy insertion into the speaker terminals. Y ou may need to separate the two conductors further in order to thread them through the shelf stand or floor stand adapter .
6 Connect each speaker to the corresponding speaker terminals on your receiver or amplifier . If you are using a subwoofer , follow the directions in that owner’ s guide to connect and configure it. Configure your receiver or processor to reflect the correct number of speakers in your system.
7 If there is no sound from any of the speakers: • Check that receiver/amplifier is on and a source is playing. • Check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured, or touching each other .
An important point after buying a device JBL SCS-SAT500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL SCS-SAT500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL SCS-SAT500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL SCS-SAT500 you will learn all the available features of the product, as well as information on its operation. The information that you get JBL SCS-SAT500 will certainly help you make a decision on the purchase.
If you already are a holder of JBL SCS-SAT500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL SCS-SAT500.
However, one of the most important roles played by the user manual is to help in solving problems with JBL SCS-SAT500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL SCS-SAT500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
