Instruction/ maintenance manual of the product 981-00052-02 JBL Professional
Go to page of 16
J B L S R-X User’s Guide Contents W elcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Before Y ou Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Rigging/Suspending S R-X Products Stand Mounting Stacking Speakers Hearing Damage Outdoor Applications Product Range .
W elcome 2 W elcome to the family of discerning sound equipment users who have selected J BL Professional loudspeakers. This User’s Guide contains important information that will help you get the most from your JB L speakers so please take a few moments to read it and be sure to keep it in a safe place for future reference.
Before Y ou Begin 3 Important information Before using your SR-X Series speaker system, please revie w the following for important information on safety and protection of your investment in quality loudspeakers.
Product Range 4 The SR-X Series consists of 1 1 popular configurations including subwoofers, front-of-house systems, and stage monitors. SR-X models include these features: • Metalized polyester capacitors are used throughout (instead of cheaper electroly tics) for higher power handling and lower distortion.
5 Product Range 2-W ay Systems SR4722X 1 2” two-way compact speaker: A great choice for applications where compact size, ease of transport, and speaker stand “mountability” are required. For speech and many music uses, the SR47 22X works great by itself.
Product Range 6 3-W ay Systems SR4732X Dual 1 2” three-way system: T ake the SR47 3 1X, add the high-frequency sizzle of a 2404 UH F driver and you get the ultimate speaker system for very high-level music playback in medium to short throw applications.
Recommended Po wer 7 Model Full-Range / Parallel (1) HF (2) LF (3) / Discrete (4) SR47 02X 600W@8 Ω 1 00W@8 Ω 600W@8 Ω SR47 1 5X 1 ,200W@4 Ω n/a 600W@8 Ω x2 SR47 1 8X 600W@4 Ω n/a n/a SR47.
Cable & Connections Passive S ystems & Subs (Parallel mode) Bi-Amp S ystems & Subs (Discrete mode) 2 Core 4 Core ± 2 HF Signal or LF #2 Sub Signal ± 1 LF Signal or LF #1 Sub Signal ± 1 Full Range Signal or Sub Signal Each connector panel incorporates two Neutrik ® Speakon ® connectors.
9 1 . Remove 6 connector plate retaining screws and remove the plate. 2. T urn plate over and locate the male connector. 3. Pull out connector and firmly place in socket of desired system mode - you should be able to see the yellow indicator in the desired mode window.
Input Configurations Sub Connector Plate w/ N L4 MPR Inputs SR47 1 5/ 1 9X Discrete Mode 2-W ay Connector Plate w/ N L4 MP R Inputs In Out LF #2 LF #1 In Out LF #2 LF #1 ±2 ±2 ±1 ±1 In Out LF #2 L.
11 SR-X Series loudspeaker systems may be operated in an optional bi-amplified mode. When used in this optional mode, an external, low-level crossover network is required. J BL Professional offers the DSC260 Digital System Controller for these applications.
S ystem Configurations 12 Full-range 2-W ay Bi-Amplified 2-W ay There are many different possible configurations of systems within the JBL S R-X Series. This section shows a selection of key system configurations that will provide a basis for setting up any system, it includes: DSC controllers, amplifiers and wiring connections.
HF ± 1 Full-Range ±1 Pin 2 mode LF ± 2 13 S ystem Configurations Bi-Amp 2-way with Sub (Discrete Mode) Sub ± 1 DSC260 Input B Output 4 Output 2 Sub ± 2 Output 6 Full-range 2-way with Sub (Parallel Mode) Full-r ange 2-Way with Sub (using a single 4 conductor amp - speaker cable) (See page 9 and 1 0 for details on input configuration.
SR-X/F Flying V ersions Suspension or flying speaker systems requires training and expertise. Improper rigging of a flying speaker may result in injury, death, equipment damage, and legal liability . This User Guide is intended to provide a skilled system rigger with resources needed to get the most from the SR-X/F speaker system.
Each primary “load bearing”suspension point shall be rated for the entire load. Appropriate T rack Fitting (User supplied, overhead suspension rated and certified) Secondary Suspension Point Appro.
LF Driver Mid Driver HF Driver Horn Rated System Frequency Crossover Nominal Dispersion Weight Shape Dimensions Power* Impedance Range (-1 0 dB) Freq. Sensitivity** (H X V) SR47 02X 2206H -- 2426H OASR 600 8 42Hz-20kHz 1 .3 kHz 95dB 85º x 85º 29 kg Multi-angle monitor 648 x 403 x 356 64 lbs 25.
An important point after buying a device JBL Professional 981-00052-02 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL Professional 981-00052-02 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL Professional 981-00052-02 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL Professional 981-00052-02 you will learn all the available features of the product, as well as information on its operation. The information that you get JBL Professional 981-00052-02 will certainly help you make a decision on the purchase.
If you already are a holder of JBL Professional 981-00052-02, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL Professional 981-00052-02.
However, one of the most important roles played by the user manual is to help in solving problems with JBL Professional 981-00052-02. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL Professional 981-00052-02 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center