Instruction/ maintenance manual of the product P1020II JBL
Go to page of 4
Automotive Subwoofers Owner’s Manual P1020 I I P1020D I I P1220 I I P1220D I I POWER SERIES ® ®.
Thank you for purchasing a new JBL Power Series subwoofer. Subwoofer installation requires woodworking skills and some experience disassembling and reassembling automotive interiors. If you lack the tools or necessary skills, have your subwoofer installed by an authorized JBL dealer.
03 JBL Power Series subwoofers are available in two different configurations: as a single 2-ohm voice coil or as dual 2-ohm voice coils. Depending on the amplifiers you are using, you may use either single-voice coil or dual-voice coil subwoofers in singles or multiples to maximize the power available from your amplifiers.
P1020 II P1020D II P1220 II P1220D II 10" Automotive 10" Automotive subwoofer, 12" Automotive 12" Automotive subwoofer, subwoofer dual-voice coil subwoofer dual-voice coil Power handling (RMS) 400 Watts 400 Watts 400 Watts 400 Watts Power handling (peak) 1600 Watts 1600 Watts 1600 Watts 1600 Watts Sensitivity (2.
An important point after buying a device JBL P1020II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL P1020II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL P1020II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL P1020II you will learn all the available features of the product, as well as information on its operation. The information that you get JBL P1020II will certainly help you make a decision on the purchase.
If you already are a holder of JBL P1020II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL P1020II.
However, one of the most important roles played by the user manual is to help in solving problems with JBL P1020II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL P1020II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
