Instruction/ maintenance manual of the product MS-2 JBL
Go to page of 6
INTRODUCTION Thank you for your purchase of the JBL ® Pr oCoustics MS-2 car audio optimizer . We have designed the MS-2 to dramatically impr ove the sound of portable audio devices in your vehicle, and to be quick and easy to connect, set up and use.
CONNECTIONS 2 T o Headphone Output Portable Music Player Audio Output Connector Audio Input Connector Power Supply Connector T o 12V Power Outlet Cigarette Lighter/ 12V Power Outlet T o Aux Input 3-ft (0.
CONTROLS AND INDICA TORS Power indicator: Lights green when the MS-2 is on; pulses r ed when the MS-2 is in Standby mode. See Standby and On Modes , on page 5, for more information.
6. Press and hold the Setup button. The Setup indicators will flash one at a time and you will hear brief test signals through your audio system’ s speakers.
Using the MS-2 with a Powered Subwoofer: 1. Press and hold the Bass button for five seconds. The Sub indicator light will turn on. 2. Set your subwoofer’ s crossover (low-pass filter) to 50Hz.
HARMAN Consumer , Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA © 2011 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
An important point after buying a device JBL MS-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL MS-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL MS-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL MS-2 you will learn all the available features of the product, as well as information on its operation. The information that you get JBL MS-2 will certainly help you make a decision on the purchase.
If you already are a holder of JBL MS-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL MS-2.
However, one of the most important roles played by the user manual is to help in solving problems with JBL MS-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL MS-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
