Instruction/ maintenance manual of the product 300 JBL
Go to page of 8
4X 1X 1X 4X 4X 8X 1X INCLUDED ITEMS 1X 3X 15 ft (4.5m) 2X 30 ft (9.0m) THANK YOU FOR CHOOSING THIS JBL ® PRODUCT The Cinema 300 is a complete six-piece home theater speaker system that includes four .
2 On/Standby LED: When the Power -On Mode Switch is in the “Auto” position, this LED indicates whether the subwoofer is in the On or Standby state: When the LED glows green, the subwoofer is turned on. • • When the LED glows red, the subwoofer is in the Standby mode.
3 www .j b l . co m Engli sh PLACING THE SPEAKERS FRONT LEFT AND RIGHT SPEAKERS CENTER SPEAKER SURROUND SPEAKERS AND SUBWOOFER Surround Right Speaker Surround Left Speaker 5 – 6 ft (1.
4 SPEAKER MOUNTING OPTIONS SHELF-MOUNTING Satellites: Center: 1. 3. 2. WALL-MOUNTING IMPORT ANT SAFETY NOTE: The customer is solely responsible for proper selection and installation of mounting har dware not included with the speakers. JBL disclaims any liability for the selection and installation of mounting hardwar e.
5 www .j b l . co m Engli sh + – + – + – FRONT LEFT + – + – SURROUND RIGHT CENTER SPEAKER OUTPUT Wire with Colored Band to “+” T erminal Wire with Colored Band to “+” T erminal Ampli.
6 CONNECTING THE SUBWOOFER TO A RECEIVER OR PREAMP/PROCESSOR WITH A DEDICA TED SUBWOOFER OUTPUT Mono RCA Cable (included) Receiver or Amplifier SUBWOOFER LFE OUT SUB 140P Subwoofer Mono RCA Cable (inc.
7 www .j b l . co m Engli sh OPERA TING THE SUBWOOFER TURNING THE SUBWOOFER ON AND OFF Set the subwoofer’ s Power Switch to the “On” position. If the subwoofer’ s Power -On Mode Switch is set .
SPECIFICA TIONS CINEMA 300 SYSTEM Frequency r esponse: 32Hz – 20kHz (–6dB) CINEMA 300 CENTER SPEAKER Low-frequency transducer: T wo 3" (75mm) PolyPlas cones, video-shielded High-frequency transducer: 1" (25mm) titanium-laminate dome, video-shielded Recommended power handling: 100 watts Nominal impedance: 8 ohms Sensitivity (2.
An important point after buying a device JBL 300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL 300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL 300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL 300 you will learn all the available features of the product, as well as information on its operation. The information that you get JBL 300 will certainly help you make a decision on the purchase.
If you already are a holder of JBL 300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL 300.
However, one of the most important roles played by the user manual is to help in solving problems with JBL 300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL 300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
