Instruction/ maintenance manual of the product PRO 9644A JAMO
Go to page of 8
128-6620A 1 of 8 SELECT ABLE FEA TURES Note: The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
128-6620A 2 of 8 Page 2 or Fifth Press and release the valet switch 2 chirps = active locks Press transmitter Lock button to change 1 chirp = passive locks or Sixth Press and release the valet switch .
128-6620A 3 of 8 Page 3 Dash Mounted LED: A small LED is included that will serve as a visual indicator of the alarm status. It should be installed in the dash, located where it can be easily seen from outside the vehicle, yet not be distracting to the driver .
128-6620A 4 of 8 Dark Blue Wire: DELA YED 300 mA PULSED OUTPUT / CHANNEL 3 The dark blue wire pulses to ground via an independent RF channel from the keychain transmitter . This is a transistorized, low current output, and should only be used to drive an external relay coil.
128-6620A 5 of 8 Page 5 Note: This is a normally opened starter cut arrangement, and when power is removed from the security system, the starter disable feature will remain operational, and the vehicle will not start. Audiovox does not recommend using the Orange w/ White trace wire to interrupt anything but the starting circuit of the vehicle.
128-6620A 6 of 8 Page 6 4 Pin White Connector: Shock Sensor (OPTIONAL) Route the red, black and green wires in the 4 pin white connector from the shock sensor to the control module, and plug one end into the shock sensor , and the other end into the mating white connector on the side of the module.
128-6620A 7 of 8 optional relay . Connect the door side of the cut wire to terminal 30 of the optional relay added. Connect the vehicle side of the cut wire to terminal 87a of the optional relay added. Connect the red wire of the 3 pin harness to terminal 86 of the optional relay added.
128-6620A 8 of 8 © 2003 Audiovox Electronics Corp., Hauppauge, N.Y. 11788 128-6620A.
An important point after buying a device JAMO PRO 9644A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JAMO PRO 9644A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JAMO PRO 9644A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JAMO PRO 9644A you will learn all the available features of the product, as well as information on its operation. The information that you get JAMO PRO 9644A will certainly help you make a decision on the purchase.
If you already are a holder of JAMO PRO 9644A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JAMO PRO 9644A.
However, one of the most important roles played by the user manual is to help in solving problems with JAMO PRO 9644A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JAMO PRO 9644A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
