Instruction/ maintenance manual of the product MPA-101 Jamo
Go to page of 16
MPA-101 WARNING: Improper installation could result in damage to the amplifier and/or speakers. Read all instructions before installation..
Safety Precautions 9. Pull on the mains plug - never the mains lead itself - when disconnecting the plug from the wall outlet. Ensure that the mains lead does not become stretched or trapped/clamped, especially around the mains plug and the point at which the lead is connected to the product.
Contents: Introduction Page 4 Features: Page 4 Jamo MPA-101 front panel Page 5 Jamo MPA-101 rear panel Page 6 Connection Page 7 Connecting examples Page 8 Passive subwoofer Page 8 Fullrange stereo Pag.
4 Introduction Congratulations on your purchase of your new Jamo Multi-Purpose Amplifier (MPA-101). It is backed by state-of-the-art engineering and manufacturing techniques to bring you the best quality craftsmanship and reliable performance. The MPA-101 is specifically designed for home theatre applications.
5 Jamo MPA-101 front panel c Power LED Flashing blue - Standby mode Blue - Amplifier On Flashing red - Thermal protection Red - Overload protection d Level adjustment.
6 Jamo MPA-101 rear panel c Power switch d Socket for mains cable e Speaker output: Speakers terminals f Low pass adjustment: Output frequency is adjustable between 50 - 150 Hz.
7 Connection The Jamo MPA-101 is equipped with gold-plated push button binding posts which will accept very heavy stripped wire. Ask your local Jamo dealer for advice on the choice of cable. Connect the loudspeakers to your Jamo MPA-101 as follows: 1.
8 Connecting examples Passive subwoofer When „Low pass“ is selected, you can adjust the low pass frequency between 50 - 150 Hz. This makes it possible to make the subwoofer match your front speakers.
9 Fullrange stereo.
10 2 x 100W bridged.
11 Daisy chain When using this feature you can connect all the MPA-101 in parallel you need..
12 Specifications Rated Power Output Total Harmonic Distortion (THD) Signal-to-Noise Ratio Crossover Freq. Responce (-3dB): Auto Turn On Sensitivity Delay „OFF“ Time Input Sensitivity Line In Line Out Freq. Response (-3dB) Input Impedance Line In Max.
13 The scope of the warranty The warranty period will come into force as from the purchase date stated on the invoice. The warranty will apply for the following period of time: • 2 years for electronics (power supply, amplifier, etc.) • 7 years for other parts (cabinet, speaker units, etc.
.
.
MPA-101 / 44.2000.
An important point after buying a device Jamo MPA-101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jamo MPA-101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jamo MPA-101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jamo MPA-101 you will learn all the available features of the product, as well as information on its operation. The information that you get Jamo MPA-101 will certainly help you make a decision on the purchase.
If you already are a holder of Jamo MPA-101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jamo MPA-101.
However, one of the most important roles played by the user manual is to help in solving problems with Jamo MPA-101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jamo MPA-101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
