Instruction/ maintenance manual of the product 50 JAMO
Go to page of 17
DVD Receiver DVR 50 ,,,rJ_,, ,i _LL, __©.
Contents Introduction 5 Quick Setup 9 Advanced Setup 11 Receiver 13 DVDs and Other Media 14 Advanced Functions 15 Radio 16 Support 17 Appendix 19 Congratulations on your new Jamo DVR 50 Receiver The many different functions provided by your new DVDreceiver will be a source of pleasure for you for many years to come.
Introduction Make sure the following accessories are included with your DVD Receiver. Power Cable ) Batteries for the remote control (size "AAA" RBP) Remote control Y _S-Video Not grovided i.
Refer to the illustration below to connect speakers, subwoofer and antennas. To fit the DVR50 into your current video system, refer to the three configuration examples.
SCART video configuration Both audio and video is connected through the SCART lead. Ira Satellite receiver or set top box has digital audio output (here optical), you can con- nect to it directly. VCR SAT/STB S-Video configuration Video is connected through the S-Video connectors (or composite video connectors) to the TV.
Overv!ew Front Panel The front panel has tile Standard buttons listed below. When tile disk tray is open, push the end of the tray to cloSe it. 1= Standby =Bno 2= Source select 3. Volume up 4. Volume down 5= Previous (Arrow down in menuS) 6= Next (Arrow up in menus) 7.
Quick Setup If vour DVD Receiver is eorrec_ eonnec_ea (see _ne chapter on cable eonnectionsl, a menu will aDDear wnen _ou _urn on _ne DVD Receiver. The menu instaIIs the most _moortant settings for your IV set and {anguage.
Note: Some 4:3 1V sereens can display 16:9 format. TV ii I i ii_ ii i This screen presents two different types of IV formats: 4:3 (normaO or 16:9 (wide ser_en)_ Speaker Type To ge_ me oes_ possible so.
Advanced Setup You can always access the Setup menu and adjust the DVR 50 to your specific requirements and hardware. When the ]amo logo appears on the main screen, press the SETUP button on your remote control, and a menu will appear with the available options.
Audio Settings Jamo has tuned the product to give you the best possible sound experience (Jamo Reference]. Under acoustic setup, you can neutralize these settings or enhance them further by selecting .
Receiver Turn on and select DVD. rad*o, video and TV by presstng the source ou_tons. ®®® ® @@@@ RA_O "_DEO "N ®@@® V_LUUE Standb. Button Standby will turn off the DVD receiver Source Select Buttons Press the DVD button to start playing a medium.
The DVD Player supports the following media: DVD Video, DivX, XviD, ISO MPEG-4,Audio CD,MP3, Ogg Vorbis and JPG. DVD Menu If vou nave adjusted your DVD Receiver according to tne "3s_ructlons above. 1ou can now insert a DVD into vour DVD Receiver.
Advanced Functions TO simplify the remote, we have put all advanced functions under the list button. Press list until you get the function you want to operate. Press enter to activate it. Subtitle Use this function to choose from the subtitles available on the film.
Radio If the antennas are correctly connected, you should be able to listen to both FM and AM radio ©© Find a rodio stotion Press >> or << to start searching for a radio station. The display will show the current fre- quency. If necessary you can fine tune with arrow up/down.
Support iii ii iiiii iiiiiiiiiiiii More information is available at Jamo's website. Address: www.jamo.com Updates At our website, vou can update the DVD Reeeive¢s firmwaretoperatlng svstem with the latest new features. To do so aowmoaa me software from me aowmoaa section at the www.
Packaging If possible use the anginal packing _naterial for anv shppmg. Otherwise. reoack the DVR 50 using: • A reinforced carat)oara t)ox. s[rong enough to carrv the weight of the _roaue[. At least 6 em 2.36 inches of shock-absorbing "nater_al around _ne DroaLIc[.
Appendix List of country codes available for DVDlanguage setup AFGHANISTAN )O4 ALBANIA ]08 ALGERIA 312 AMERICAN SAMOA )16 ANDORRA 320 ANGOLA )24 ANGUILLA 660 ANTARCTICA )10 ANTIGUA AND BARBUDA 328 ARG.
An important point after buying a device JAMO 50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JAMO 50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JAMO 50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JAMO 50 you will learn all the available features of the product, as well as information on its operation. The information that you get JAMO 50 will certainly help you make a decision on the purchase.
If you already are a holder of JAMO 50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JAMO 50.
However, one of the most important roles played by the user manual is to help in solving problems with JAMO 50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JAMO 50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
