Instruction/ maintenance manual of the product SVT-2 PRO Ampeg
Go to page of 8
Owners Guide for the Owners Guide for the Ampeg ® is Proudly Made in America Ampeg ® is Proudly Made in America Bass Amplifier Bass Amplifier -15dB PAD MUTE PEAK / MUTE ULTRA LO BRIGHT ULTRA HI GRAP.
2 Important Safeguards and Precautions: All Ampeg products are designed for continuous safe operation, as long as common sense is used and steps are taken to help avoid certain problems. Abiding by the following rules can help prevent damage to your preamp, yourself and others.
3 An Introduction to your new Ampeg SVT -2 PRO Bass Amplifier The harmonically rich sound and legendary performance of the AMPEG SVT are redefined in the SVT -2 PRO.
4 SVT -2 PRO Bass Amplifier The Front Panel Controls and Their Use 1. INPUT : This jack accepts a passive or active instrument or a line level signal through a shield- ed instrument cable. 2. P AD: This switch attenuates the input signal by 15dB. Attenuation allows the Gain control (4) to be used in a more usable (higher) position.
5 SVT -2 PRO Bass Amplifier The Rear Panel 22. AC LINE IN: Firmly plug the supplied AC power cord into this socket, pushing it in until it is fully seated. Plug the male end of the cord into a grounded AC outlet. DO NOT DEFEA T THE GROUND PRONG OF THE AC PLUG! 23.
6 Some Suggested Settings* SVT -2 PRO Bass Amplifier PEAK / MUTE UL TRA LO BRIGHT UL TRA HI MASTER TREBLE FREQUENCY MIDRANGE BASS DRIVE GAIN IN OUT OUT OUT AS NEEDED AS NEEDED PEAK / MUTE UL TRA LO BR.
7 SVT -2 PRO Bass Amplifier Changing the T ubes T ubes wear out in direct proportion to how often and how hard you play the amplifier . Power tubes should be checked at least once a year – more frequently if you use the amplifier nearly every day .
Ampeg reserves the right to change specifications without notice. Ampeg is proudly Made in America © 1998 SLM Electronics • 1400 Ferguson Avenue • St. Louis, MO 63133 U.S.A. P/N 47-509-1 1 • 04/98 T echnical Specifications OUTPUT POWER RA TING 300 W atts RMS minimum continuous @ <3% THD into 2 or 4 ohms, 0.
An important point after buying a device Ampeg SVT-2 PRO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ampeg SVT-2 PRO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ampeg SVT-2 PRO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ampeg SVT-2 PRO you will learn all the available features of the product, as well as information on its operation. The information that you get Ampeg SVT-2 PRO will certainly help you make a decision on the purchase.
If you already are a holder of Ampeg SVT-2 PRO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ampeg SVT-2 PRO.
However, one of the most important roles played by the user manual is to help in solving problems with Ampeg SVT-2 PRO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ampeg SVT-2 PRO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
