Instruction/ maintenance manual of the product Rinse Regulating Thermostat Replacement Jackson
Go to page of 5
Rinse Regulating Thermostat Replacement (From EGO brand to Stemco) 07610-003-13-91 A November 16, 2005 Dishmachine Maintenance Instructions.
Many dishmachines comes with integral booster tanks to ensure proper temperature of the final rinse. Jackson has predom - inantly used two manufacturers of thermostats, EGO and Stemco. These instructions are for use with kit 06401-003-13-94, which is to replace an EGO rinse regulating thermostat with a Stemco brand.
5. Attach the jumper wires to the wires that you removed from the old thermostat. 6. Slide the new imperial brass fitting from your kit onto the new thermostat. 7. Insert the new thermostat/brass fitting combination into the well and tighten down the brass fitting by hand.
www.jacksonmsc.com Rinse RegulatingThermostat Replacement Instructions Revision A (11/16/2005) 4 8. Use the 7/16” combination wrench to tighten down the brass fit - ting, while also positioning the new thermostat so that it does not hang over the heater.
on the machine data plate for every cycle. SPECIAL NOTES Work performed on Jackson dishmachines by unautho - rized or unqualified personnel may void the warranty. Before begin - ning this or any other maintenance evolution on a unit under war - ranty, you should contact a certified Jackson technician or Jackson Technical Service.
An important point after buying a device Jackson Rinse Regulating Thermostat Replacement (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jackson Rinse Regulating Thermostat Replacement yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jackson Rinse Regulating Thermostat Replacement - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jackson Rinse Regulating Thermostat Replacement you will learn all the available features of the product, as well as information on its operation. The information that you get Jackson Rinse Regulating Thermostat Replacement will certainly help you make a decision on the purchase.
If you already are a holder of Jackson Rinse Regulating Thermostat Replacement, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jackson Rinse Regulating Thermostat Replacement.
However, one of the most important roles played by the user manual is to help in solving problems with Jackson Rinse Regulating Thermostat Replacement. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jackson Rinse Regulating Thermostat Replacement along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
