Instruction/ maintenance manual of the product Rack Conveyor Dishmachine Jackson
Go to page of 4
Motor Assembly Replacement 07610-003-20-17 March 14, 2006 Rack Conveyor Dishmachine Maintenance Instructions.
Conveyor Motor Replacement Instructions 07610-003-20-17 Rev. A Issued: 03-14-2006 Revised: N/A MAINTENANCE INSTRUCTIONS REPLACING CONVEYOR MOTOR 2 The instructions provided here are for maintenance per - sonnel only. Unauthorized persons should not attempt any of the steps contained in these instructions.
MAINTENANCE INSTRUCTIONS REPLACING CONVEYOR MOTOR 3 4. Remove the motor support bracket. 5. With the motor support bracket removed, gently pull back on the motor. You may have to move it from side to side, but it should start to move back. Pull it completely away from the mounting studs on the tub and set down gently to work on it.
4 16. Attach the motor support rear clamp. 17. Adjust the motor support bracket so that the motor assembly is level and tighten down. 18. Attach the motor wiring cover. AFTER MAINTENANCE ACTIONS Reconnect the incoming water (if disconnected) and turn on.
An important point after buying a device Jackson Rack Conveyor Dishmachine (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jackson Rack Conveyor Dishmachine yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jackson Rack Conveyor Dishmachine - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jackson Rack Conveyor Dishmachine you will learn all the available features of the product, as well as information on its operation. The information that you get Jackson Rack Conveyor Dishmachine will certainly help you make a decision on the purchase.
If you already are a holder of Jackson Rack Conveyor Dishmachine, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jackson Rack Conveyor Dishmachine.
However, one of the most important roles played by the user manual is to help in solving problems with Jackson Rack Conveyor Dishmachine. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jackson Rack Conveyor Dishmachine along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
