Instruction/ maintenance manual of the product IHC018 IPSO
Go to page of 24
5-08-52R 1 June 201 1 Refer to Installation ma nual for full instructions. On-Pr emise Laundr y Planning Handbook IHC W asher-Extr actor s CHM2097N.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT © Published by pe rmission of the cop yright owner . All rights reserved. No part of the cont ents of this book may be reproduced or transmitted in any form or by any means without the expressed writte n consent of the publisher .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 2 5-08-52 W asher-Extr actor s Introduction Model Identification - IHC W asher-Extractors Figure 1 CHM2097N IHC012 IHC025 IHC03.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-52 3 S pecifications and Dime nsions - Model IHC012 Capacity (dry weight) Ratio (kg/l) 1:1 1 1 1.02 lb. (5 kg) 1:10 12.13 lb. (5.5 kg) 1:9 13.45 lb. (6.1 kg) Cylinder Cylinder diameter , in.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 4 5-08-52 Machine Dimensions - Model IHC012 1 V entilation Soap Dispenser 6 Electrical Connections 2 W arm Water Connections .75 in. 7 V entilation Tub 3 Liquid Soap Connectio ns 8 Drain V alve 4 Soft W ater Connections .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-52 5 Mounting Bolt Hole Locations - Model IHC012 CHM2203N Figure 3 CHM2203N 2.56 in. (65 mm) 20.87 in. (530 mm) 21.46 in. (54 5 mm) 19.09 in. (485 mm) 1.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 6 5-08-52 Electrical Inst al lation Requirement s - Model IHC012 Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-52 7 S pecifications and Dime nsions - Model IHC018 Capacity (dry weight) Ratio (kg/l) 1:1 1 15.21 lb. (6.9 kg) 1:10 16.76 lb. (7.6 kg) 1:9 18.52 lb. (8.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 8 5-08-52 Machine Dimensions - Model IHC018 Figure 4 1 V entilation Soap Dispenser 6 Electrical Connections 2 W arm Water Connections .75 in. 7 V entilation Tub 3 Liquid Soap Connectio ns 8 Drain V alve 4 Soft W ater Connections .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-52 9 Mounting Bolt Hole Locations - Model IHC018 CHM2207N Figure 5 CHM2207N 1.18 in. (30 mm) 20.87 in. (530 mm) 1.18 in. (30 mm) ø0.71 in. (ø18 mm) 25.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 10 5-08-52 Electrical Inst al lation Requirement s - Model IHC018 Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-52 11 S pecifications and Dime nsions - Model IHC025 Capacity (dry weight) Ratio (kg/l) 1:1 1 18.96 lb. (8.6 kg) 1:10 20.94 lb. (9.5 kg) 1:9 23.15 lb. (10.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 12 5-08-52 Machine Dimensions - Model IHC025 Figure 6 1 V entilation Soap Dispenser 6 Electrical Connections 2 W arm Water Connections .75 in. 7 V entilation Tub 3 Liquid Soap Connectio ns 8 Drain V alve 4 Soft W ater Connections .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-52 13 Mounting Bolt Hole Locations - Model IHC025 CHM221 1N Figure 7 CHM2211N 1.18 in. (30 mm) 20.87 in. (530 mm) 1.18 in. (30 mm) 27.17 in. (690 mm) 29.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 14 5-08-52 Electrical Inst al lation Requirement s - Model IHC025 T able 3 Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-52 15 S pecifications and Dime nsions - Model IHC030 Capacity (dry weight) Ratio (kg/l) 1:1 1 26.46 lb. (12 kg) 1:10 29.10 lb. (13.2 kg) 1:9 31.97 lb. (14.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 16 5-08-52 Machine Dimensions - Model IHC030 Figure 8 1 V entilation Soap Dispenser 6 Electrical Connections 2 W arm Water Connections .75 in. 7 V entilation Tub 3 Hard W ater Connections .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-52 17 Mounting Bolt Hole Locations - Model IHC030 CHM2215N Figure 9 CHM2215N 1.44 in. (36.5 mm) 25.51 i n. (648 mm) 26.18 in. (665 mm) 29.06 i n. (738 mm) 2.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 18 5-08-52 Electrical Inst al lation Requirement s - Model IHC030 Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-52 19 S pecifications and Dime nsions - Model IHC035 Capacity (dry weight) Ratio (kg/l) 1:1 1 33.07 lb. (15 kg) 1:10 36.38 lb. (16.5 kg) 1:9 40.34 lb. (18.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 20 5-08-52 Machine Dimensions - Model IHC035 Figure 10 1 V entilation Soap Dispenser 6 Electrical Connections 2 W arm Water Connections .75 in. 7 Drain V alve 3 Soft W ater Connections .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-52 21 Mounting Bolt Hole Locations - Model IHC035 CHM2219N Figure 1 1 CHM2219N 1.44 in. (36.5 mm) 25.51 in. (648 mm) 30.12 in. (765 mm) 32.99 i n. (838 mm) ø0.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extractors 22 5-08-52 Electrical Inst al lation Requirement s - Model IHC035 Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W asher-Extracto rs 5-08-52 23 Inst allation - IHC Models Surface The machine must be securely fixed on a flat surface (metal base, co ncrete or so lid ground). The anchoring is to be done on the 6 provided places in the holes on the corner of the base.
An important point after buying a device IPSO IHC018 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IPSO IHC018 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IPSO IHC018 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IPSO IHC018 you will learn all the available features of the product, as well as information on its operation. The information that you get IPSO IHC018 will certainly help you make a decision on the purchase.
If you already are a holder of IPSO IHC018, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IPSO IHC018.
However, one of the most important roles played by the user manual is to help in solving problems with IPSO IHC018. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IPSO IHC018 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
