Instruction/ maintenance manual of the product Tracer LX Invacare
Go to page of 8
Solid Seat Installation / Replacement fo r Model 1000, T racer LX, T racer IV , and T racer EX Wheelchairs Assembly , Installation and Operating Instructions Model Nos. 1610, 1610P , 1610N, 1610PN NOTE: Check all parts for shipping damage before using.
2 ADUL T REMOV ABLE ARM WHEELCHAIR (REAR) ADUL T/HEMI PERMANENT ARM WHEELCHAIR (REAR) HEMI REMOV ABLE ARM WHEELCHAIR (REAR) FIGURE 2 - SEA T RAIL SP ACER POSITION Screw (1) Spacer A Solid Seat X-Brace.
3 12. Replace the tension spring and the seat guide into the seat rails (FIGURE 1). NOTE: For Permanent Arm Wheelchairs replace seat guides in front and rear of chair (FIGURE 1). 13. Replace the front seat guide into its side frame side frame (Removable Arm ONL Y) (FIGURE 1).
FIGURE 5 - ASSEMBL Y OF THE FRONT X-B RACE T op View Front of Seat Spacers Slide X-Brace Over Seat Rails Spacers Seat Rails 4 Solid Seat Ordered Off Chair (FIGURE 6) 1 . Remove wheelchair arms. 2 . Close chair . 3 . Remove the ten (10) mounting screws securing the seat upholsteryto the seat rails.
5 FIGURE 6 - INSERTING THE SOLID SEAT - TRAER IV ONLY Bolt Long Mounting Scews Solid Seat Solid Seat Braces Solid Seat Brace Locknut Long Mounting Scews X-Brace Pivot Screw Locknut Bolt Locknut X-Brac.
6 6 . Perform one of the following: A . Spring loaded seat guide: Remove the rear seat guide and tension spring from the seat rail. B. Plastic seat guide: Firmly grasp the plastic seat guide and pull to remove from the seat rail. 7 . Repeat STEPS 5-6 on remaining seat rail.
7 Rear Seat Guide (Spring Loaded Seat Guide) T ension Spring Guide T ubes Seat Guides X-Brace Pivot Screw Locknut X-Brace Seat Upholstery Seat Rails STEPS 1-7 FIGURE 7 - INSTALLING THE SOLID SEAT - TR.
In vacare Corporation www .invacar e.com U S A Canada One In vacare W ay 5970 Chedworth W a y Invacar e ® and Y es, you can. are trademarks of In vacare Elyria, Ohio USA Mississauga, Ontario Corporation. 44036-2125 L5R 3T9, Canada © 2001 Invacare Corporation 800-333-6900 905-890-8838 Form No.
An important point after buying a device Invacare Tracer LX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Invacare Tracer LX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Invacare Tracer LX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Invacare Tracer LX you will learn all the available features of the product, as well as information on its operation. The information that you get Invacare Tracer LX will certainly help you make a decision on the purchase.
If you already are a holder of Invacare Tracer LX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Invacare Tracer LX.
However, one of the most important roles played by the user manual is to help in solving problems with Invacare Tracer LX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Invacare Tracer LX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
