Instruction/ maintenance manual of the product 65400 Invacare
Go to page of 12
SAFETY SUMMARY (CONTINUED) INSTALLATION WARNINGS SPRINT (65400) and SPARTAN (65420) MODELS - The rollator height can ONLY be adjusted where the push handle is textured (FIGURE 4). After installation and BEFORE use, ensure that ALL attaching hardware is securely tightened.
2 B. Remove the phillips screw securing the EXIST- ING hand brake to the push handle. C. Pull the EXISTING hand brake off of the push handle. NOTE: Remove clamps/hardware located at the end of the NEW brake wire before performing the following steps. 4 .
3 Cable Adjuster Unit Locknut Cable Adjuster Unit Brake Cable Brake Phillips Screw Brake Wire Clamp Spring ASSEMBLED DISASSEMBLED Cable Adjuster Unit Locknut Cable Adjuster Unit Brake Cable Brake Phil.
4 REPLACING SPARTAN CANES AND BRAKES Preparing Spartan for Brake Replacement (FIGURE 2) 1 . Perform one (1) of the following: INST ALLING BRAKE KIT (BEFORE 3/7/00) - Re- move EXISTING hand brake. A . Remove the hex bolt, washer and locknut secur- ing the hand brake to the push handle.
5 Replacing Spartan Brakes (FIGURE 4) 1 . Remove the brake pad. Refer to REMOVING/IN- ST ALLING THE SP AR T AN BRAKE P AD S in this pro- cedure of the instruction sheet. 2 . Remove the plunger assembly . Perform the following: A . Pry the plunger assembly out of the rollator leg with a flat screwdriver .
6 DISASSEMBLING/ASSEMBLING THE PLUNGER ASSEMBLY - STEPS 4 AND 7 FIGURE 4 - REPLACING SPARTAN CANES AND BRAKES - REPLACING SPARTAN BRAKES Insert Plunger Spring Brake Wire Brake Wire Stop Slot Opening B.
7 B. Remove the hand brake. C. T urn the adjustment lever COUNTERCLOCK- WISE. D. Insert push handles into side frames with the hand grip facing the back of the rollator . 3. Perform one (1) of the following: INST ALLING BRAKE KIT (BEFORE 3/7/00) - Install NEW hand brake.
8 FIGURE 6 - ADJUSTING CABLE BRAKE HANDLE Cable Brake Handle Locknut Screw Mechanism Cable ADJUSTING SPRINT AND SPARTAN PUSH HANDLES (FIGURE 6) NOTE: For the most comfortable position, make sure the adjustment is performed while wearing the most frequently worn shoes.
9 Cable Adjuster Unit Locknut Cable Adjuster Unit Brake Cable Brake Phillips Screw Brake Clamp FIGURE 8 - ADJUSTING CABLE ADJUSTER UNIT - WHEEL ASSEMBLY - SPRINT ONLY Adjusting Cable Adjuster Unit - Wheel Assembly - MODEL 65400 ONLY (FIGURE 8 ) NOTE: Adjusting the cable adjuster unit will increase/ decrease the cable brake pressure on the wheels.
10 REPLACING STINGRAY AND STARGAZER BRAKES (FIGURE 10) NOTE: COUNTERCLOCKWISE/CLOCKWISE direc- tions are determined by standing beside the rollator . 1 . Remove the EXISTING brake wire. Perform the fol- lowing: A . Loosen the hex screw securing the EXISTING brake wire to the brake.
ADJUSTING STINGRAY AND STARGAZER HAND BRAKES (FIGURE 10) Adjusting Hand Brake NOTE: COUNTERCLOCKWISE/CLOCKWISE direc- tions are determined by standing behind the rollator (us- ers position). 1 . Loosen the hand brake adjustment nut by turning CLOCKWISE.
Invacare Corporation ww w .in vacare.com U S A Canada One In vacare W ay 5970 Chedworth W a y In vacare ® and "Y es, y ou can" are trademarks of In vacare Elyria, Ohio USA Mississauga, Ontario Corporation. 44036-2125 L5R 3T9, Canada © 2001 Invacare Corporation 800-333-6900 905-890-8838 Form No.
An important point after buying a device Invacare 65400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Invacare 65400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Invacare 65400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Invacare 65400 you will learn all the available features of the product, as well as information on its operation. The information that you get Invacare 65400 will certainly help you make a decision on the purchase.
If you already are a holder of Invacare 65400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Invacare 65400.
However, one of the most important roles played by the user manual is to help in solving problems with Invacare 65400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Invacare 65400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
