Instruction/ maintenance manual of the product SE7500CW2 Intel
Go to page of 17
SE7500CW2 Troubleshooting Guide - 1 - 08 / 21 / 02 Intel® Server Board SE7500CW2 Troubleshooting Guide A Guide for Technically Qualified Assemblers of Intel Identified Subassemblies/Products Revision 1.
SE7500CW2 Troubleshooting Guide - 2 - 08 / 21 / 02 Disclaimer THE INFORMATION IN THIS DOCUMENT IS PROV IDED "AS IS" WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION, OR SAMPLE.
SE7500CW2 Troubleshooting Guide - 3 - 08 / 21 / 02 Table of Contents Intel® Server Board SE7500CW2 Troubleshooting .................................................. 4 Boot Issues ......................................................................
SE7500CW2 Troubleshooting Guide - 4 - 08 / 21 / 02 Intel® Server Board SE7500CW2 Troubleshooting Welcome to the Server Board SE75 00CW2. In the unlikely event you do encounter issues, this guide will help you troubleshoot & identify possible problem areas.
SE7500CW2 Troubleshooting Guide - 5 - 08 / 21 / 02 Boot Issues 1) My server will not power on. Check for the following possibilities: • The SE7500CW2 server board requires an ATX +12V power supply. A momentary switch should be used for the power on/off switch and the sleep/resume switch.
SE7500CW2 Troubleshooting Guide - 6 - 08 / 21 / 02 • If the server will still not boot, please fill in the issue report form at the end of this document & contact your Intel customer support r epresentative. 2) My hard disk drive (HDD) lights went on, I heard the drives spin up, and my floppy drive light turned on, but I’m not seeing video.
SE7500CW2 Troubleshooting Guide - 7 - 08 / 21 / 02 cause false signals to be transmitted commanding the system to boot. Before removing the cover to your chassis, you should always • Turn off the server via the power switch on the front panel. • Unplug the AC cord from the server.
SE7500CW2 Troubleshooting Guide - 8 - 08 / 21 / 02 Other Questions General Questions 1) Is it possible to enable hyper - threading under Red Hat Linux 7.2 on the SE7500CW2 server board? In order to enable hyper - threading using Intel® Xeon ™ processor s under Red Hat Linux 7.
SE7500CW2 Troubleshooting Guide - 9 - 08 / 21 / 02 6) How do I get Microsoft* Windows NT 4.0 to install? System Requirements • SE7500CW2 Baseboard PBA number A87967 - 501 or later • SE7500CW2 BIOS version 1.12 or later • SE7500CW2 System Resource CD release A86335 - 004 or later • Promise FastTrack100 ™ Controller driver version 2.
SE7500CW2 Troubleshooting Guide - 10 - 08 / 21 / 02 10. Press <E NTER> again to continue with the installation and follow the on - screen instructions 11.
SE7500CW2 Troubleshooting Guide - 11 - 08 / 21 / 02 Onboard Network Interface Card (Intel 8 2550PM NIC) Driver Installation 1. Hold down the Shift key to disable the Autorun feature temporarily and insert the “Windows* NT 4.0 Server Server” CD into the CD - ROM drive 2.
SE7500CW2 Troubleshooting Guide - 12 - 08 / 21 / 02 wi th following steps, • copy linux - 2.4.19.tar.gz to /usr/src/ • run 'tar - xzf linux - 2.4.19' to extract the kernel source • copy patch file to new kernel source directory /usr/src/linux - 2.
SE7500CW2 Troubleshooting Guide - 13 - 08 / 21 / 02 reliability: http://support.intel.com/support/motherboards/server/SE7500CW2 Jumpers and BIOS Setup Options 1) How should the jumpers be set on Intel Server Board SE7500CW2 ? For normal operation, the jumpers are set correctly from the factory.
SE7500CW2 Troubleshooting Guide - 14 - 08 / 21 / 02 If you must contact customer support, please fill out the following support form and have it ready.
SE7500CW2 Troubleshooting Guide - 15 - 08 / 21 / 02 Problem Description Complete details of the problem setup, problem description, erro r messages, recreation steps, troubleshooting steps completed, etc.
SE7500CW2 Troubleshooting Guide - 16 - 08 / 21 / 02 Service or Support Pack: Kernel Version (if using Unix/Linux) Utilities Intel LanDesk® Client Manager version: SC5200 Ba se Hot - Swap Backplane Fi.
SE7500CW2 Troubleshooting Guide - 17 - 08 / 21 / 02 Peripherals: Manufacturer/Model number Quantity Comments: Hard Drives SCSI or ATA? Tape Drives Internal or external? CDROM Internal or USB? CDRW Int.
An important point after buying a device Intel SE7500CW2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel SE7500CW2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel SE7500CW2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel SE7500CW2 you will learn all the available features of the product, as well as information on its operation. The information that you get Intel SE7500CW2 will certainly help you make a decision on the purchase.
If you already are a holder of Intel SE7500CW2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel SE7500CW2.
However, one of the most important roles played by the user manual is to help in solving problems with Intel SE7500CW2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel SE7500CW2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
