Instruction/ maintenance manual of the product PCM-3370 Intel
Go to page of 128
PCM-3370 LV Intel Pentium III/ ULV Celeron PC/104+ CPU Module User’s Manual.
PCM-3370 User’s Manual ii Copyright This document is copyrighted, © 20 03. All rights are reserved. The origi- nal manufacturer reserves the right to make improvem ents to the products described in this manual at any time wi thout notice.
iii Packing List Before you begin installing your card, please make su re that the following materials have been shipped: • 1 PCM-3370 all-in one single board com puter • 1 CD-ROM or disks for utility, dr ivers, and manual (in PDF fo rmat) • 1 warranty certificate • 1 2.
PCM-3370 User’s Manual iv Additional Information and Assistan c e Step 1. Visit the A dvantech web site at www.advantech.com where you can find the latest info rmation about the produ ct. Step 2. Contact your distri butor, sales representative, or Advantech's cus- tomer service center for technical support if you need additional assistance.
v S a f e t y I n s t r u c t i o n s 1. Read these saf ety instruct ions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.
PCM-3370 User’s Manual vi W i c h t i g e S i c h e r h e i s h i n w e i s e 1. Bitte lesen sie Sich die se Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den sp äteren Gebrauch auf. 3. Vor jedem Reinigen ist das Gerä t vom Stromnetz zu trennen.
vii Caution! Danger of expl osion if battery is incorrectly replaced. Replace only with the same or equiv- alent type recommended by the manufa cturer.
PCM-3370 User’s Manual viii.
ix Content Chapter 1 General Information ........................................ 2 1.1 Introduction ............ ............................ ............ ........... ........ 2 1.2 Features .......... .............. ........... .............. ......
PCM-3370 User’s Manual x 2.13.1 Ethernet connector (CN5) ............ ......... .................. ...... 19 2.13.2 Network boot .... ............ ................................. ......... ...... 19 2.14 Watchdog timer configu ration .............
xi Figure 4.10:Quit Se tup Screen ....... .............. ........... ...... 42 Chapter 5 AGP 4X Setup ................................................. 44 5.1 Introduction ......... ................................................... ......... 44 5.1.
PCM-3370 User’s Manual xii B.17 CN17 KB/MS Connector ......................... .............. ....... 105 B.18 CN18 ATX Power Connector .... .............. .............. ....... 105 B.19 CN19 Power Switch Connector ............ .............. .....
CHAPTER 1 General Information This chapter gives b ackground infor- mation on the PCM-3370. Sections include: • Sections include: • Introduction • Features • Specifications • Board layout an.
PCM-3370 User’s Manual 2 Chapter 1 General Information 1.1 Introduction The PCM-3370 utili zes a PC/104+ form factor design that su pports ULV Celeron 400/650 processors and LV Pentiu m III 800, 933 processors.
3 Chapter 1 1.2 Features • All-in-one design simpli fies syst em integration and increases system stability • Supports ULV Celeron 400/650 a nd LV Pentiu m III 800/ 933 proc es- sors. • Supports on-board features such as 1 x RS-232&1 x RS-23 2/422/485 with power and 2 x USB interf aces for external peripherals.
PCM-3370 User’s Manual 4 1.3 Specifications Standard SBC funct ions • CPU: On-board ULV Intel Celeron 400/650 (Fanless) / LV Pentium III 800/933 processor • BIOS: Award 25 6 KB Flash m emory •.
5 Chapter 1 • Connection: On-board RJ-4 5 connector • Built-in boot ROM Mechanical and environmental • Max. power requirements:5V@ 2.4A for Intel Celeron ULV 400 @ 128M • Operating temperature: 0 ~ 60 ° C (32 ~ 140° F) • Dimensions (L x W): 96 mm x 115 mm (3.
PCM-3370 User’s Manual 6 1.4 Board Dimensions Figure 1.1: Board Dimensions (Component Side).
7 Chapter 1 Figure 1.2: Board Dimensions (Solder Side).
PCM-3370 User’s Manual 8.
CHAPTER 2 Installation This chapter explains how to set up the PCM-3370 hardware, inclu ding instructions on setting jum pers and connecting peripherals, switches and indicators. Be sure to read all the safety precautions before you begin the instal- lation proced ure.
PCM-3370 User’s Manual 10 Chapter 2 Installation 2.1 Jumpers The PCM-3370 has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the board's connectors and jumpers Table 2.
11 Chapter 2 JP2 Watchdog Time r JP3 PCI VIO SELECT JP4 COM1 RI Input Select JP5 COM2 RI Input Select.
PCM-3370 User’s Manual 12 2.2 Locating jumpers and connectors Figure 2.1: Locating Connectors and Jumpers CN2 JP 1 C N 1 JP 2 JP 3 CN2 CN4 CN5 CN 6 CN8 CN 9 CN1 3 CN1 4 CN 1 7 JP 4 JP 5 CN 1 9 CN 2 .
13 Chapter 2 2.3 Setting Jumpers You configure your board to m atch th e needs of your application by set- ting jumpers. A jumper is the simplest kind of elect ric switch. It consists of two metal pins and a small metal clip (often protect ed by a plastic cover) that slides over the pins to connect them.
PCM-3370 User’s Manual 14 The jumper settings are schematically depicted in this manual as follows: A pair of needle-nose pliers may be helpful when worki ng with jumpers. If you have any doubts about the best hardware configuration for your application, contact your local distributor or sales representative before you make any changes.
15 Chapter 2 2.4.1 CMOS clear (JP1) 2.4.2 PCI VIO Select (JP3) It is a PCI I/O voltage selection. It has VCC(+5V), VCC3(+3.3V) and NULL. Caution! Always ground yourself to remove any static charge before touching the PC boar d. Modern electronic devices are very sensitive to static electric charges.
PCM-3370 User’s Manual 16 2.4.3 COM1 and COM2 RI Input Select (JP4, JP5) There is Ring input select jumper at COM1 and COM2 . 2.5 SDRAM installation There are one on-board 144-pin SODIMM socket. Table 2.4: COM1 and COM2 RI Input Select (JP4, JP5 ) JP4 COM1 RI Input Select Pin Function 1-2 RI * 2-3 VCC Table 2.
17 Chapter 2 2.5.1 SODIMM DRAM You can install one DiMM (up to 512 MB). 2.6 Primary (2.5") IDE connector (CN12) The 44-pin IDE connector suppor ts up to two 44-pin IDE interface devices, including CD-ROM drives, tape-backup drives, HDDs, etc. When connecting, make sure pin 1 of the connector is matched with pin of the device's connector.
PCM-3370 User’s Manual 18 2.9 Power connectors (CN15, CN18) 2.9.1 Main power connector (CN15) The power connection is a 8-pin connecto r requiring +5 V and +12 V power. It needs a cable (17 03080104 for AT or 1703 200380 for ATX) to connect AT/ATX power supply .
19 Chapter 2 CN7 is 40-pin Hirose con nector and CN10 is 20-pin H irose connector. It can connect to a 36-bit TFT LCD pane l. Pin assignment s appear in the appendix. (For more information on LCD con nection information between CN7 and CN10 and an LCD, refer to Chapter 3.
PCM-3370 User’s Manual 20 2.15 USB connector (CN26,CN27) The PCM-3370 board provides two USB (Universal Serial Bus) inter- faces which support plug and play and hot attach/detach for up to 127 external devices. The USB interfaces comply with USB specification Rev.
21 Chapter 2 2.18.3 RTC Connector (CN22) PCM-3370F has a 2-pin box header real time clock connector..
PCM-3370 User’s Manual 22.
CHAPTER 3 Software Configuration This chapter details the software con- figuration information . It shows you how to configure the card to match your application requirements.
PCM-3370 User’s Manual 24 Chapter 3 Software Configuration 3.1 Introduction The PCM-3370 system BIOS and cu stom drivers are located in a 256 KB, 32-pin (JEDEC spec.) Flash ROM device, designated U23. A single Flash chip holds the system BIOS, VGA BIOS, and network Boot ROM image.
25 Chapter 3 2. At the prompt , type AWDFLA SH.EXE and pr ess <Enter>. Th e VGA configuration program will then display the followi ng: 3. At the prom pt, enter the new BIN file which suppo rts your display. When you are sure that you have entered the file name correctly press <Enter>.
PCM-3370 User’s Manual 26 3.3 Connections for four standard LCDs Connections to Sharp LM64183P (640 x 48 0 DSTN MONO LCD) * LM64183P requires -17 V for VEE Connections to PLANAR EL640.
27 Chapter 3 Connections to Toshiba LTM10C20 9A (640 x 480 TFT color LCD) 7L D 3 1 3 P 4 8L D 2 1 4 P 5 9 CP2 35 SHFCLK 10 GND 33 GND 11 CP1 38 LP 12 GND 33 GND 13 S 36 FLM 14 GND 34 GND 15 GND 3 GND 16 GND 4 GND 17 VL 5 VCC 18 VL 6 VCC 19 VH 1 +12 V 20 VH 2 +12 V Table 3.
PCM-3370 User’s Manual 28 Connections to Kyocera KCB 6446BSTT-X5 (640 x 480 DSTN color LCD) 13 G1 20 P11 14 G2 21 P12 15 GND 33 GND 16 G3 22 P13 17 G4 23 P14 18 G5 24 P15 19 GND 34 GND 20 ENAB 37 M 21 GND 34 GND 22 B0 11 P2 23 B1 12 P3 24 B2 13 P4 25 GND 39 GND 26 B3 14 P5 27 B4 15 P6 28 B5 16 P7 29 GND 39 GND 30 VDD 5 +5 V 31 VDD 6 +5 V Table 3.
29 Chapter 3 CN1-7 VSS 34 GN D CN1-8 HD0 20 P11 CN1-9 HD1 19 P10 CN1-10 HD2 18 P9 CN1-11 HD3 17 P8 CN1-12 HD4 12 P3 CN1-13 HD5 11 P2 CN1-14 HD6 10 P1 CN1-15 HD7 9 P0 CN2-1 LD0 24 P15 CN2-2 LD1 23 P14 .
PCM-3370 User’s Manual 30 3.4 Ethernet software configuration The PCM-3370’s on-board Ethern et interface supports all major network operating systems. To c onfigure the medium type , to view the current configuration, or to run diagnostics, do the fo llowing: 1.
CHAPTER 4 Award BIOS Setup This chapter describes how to set BIOS configuration data..
PCM-3370 User’s Manual 32 Chapter 4 Award BIOS Setup 4.1 System test and initialization These routines test and initialize bo ard hardware. If the routines encoun- ter an error during the tests, you wil l either hear a few short beeps or see an error message on the sc reen.
33 Chapter 4 4.2 Award BIOS setup Awardís BIOS ROM has a built-in Setu p pr ogram that allows users to modify the basic system configu ration. This type of inform ation is stored in battery-backed CMOS RAM so that it reta ins the Setup information when the power is turned off.
PCM-3370 User’s Manual 34 online help information is displayed in the left bottom of the Menu screen. Figure 4.2: CMOS Setup Screen.
35 Chapter 4 4.2.3 BIOS features setup By choosing the BIOS FEATU RES Setup option from the Init ial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturerís default values for the PCM-3370.
PCM-3370 User’s Manual 36 4.2.4 Chipset features setup By choosing the CHIPSET FEATURES Setup option from the Initial Setup Screen menu, the sc reen below is displayed. This sample screen contains the manufacturerís default values fo r the PCM-3370.
37 Chapter 4 4.2.5 Power management setup By choosing the POWER MANAG EMENT Setup option from the Initial Setup Screen menu, the sc reen below is displayed.
PCM-3370 User’s Manual 38 4.2.6 PnP/PCI configuration setup By choosing the PnP/PCI CONFIG URATION option from the Initial Setup Screen menu, the sc reen below is displayed. This sample screen contains the manufacturerís default values fo r the PCM-3370.
39 Chapter 4 4.2.7 Integrated peripherals By choosing the INTEGR ATED PERI PHERALS option from t he Initial Setup Screen menu, the sc reen below is displayed.
PCM-3370 User’s Manual 40 4.2.8 Load Optimized Defaults BIOS L OAD O PTIMIZED D EFAUL TS loads the default optimized system values directly from ROM. If the stored record created by the Setup program becomes corrupted (and therefore unus able), these defaults will load automatically when you turn the PCM-3370 on.
41 Chapter 4 Enter the current passwo rd and press <Enter>. 3. After pressing <Enter> (ROM password) or the current password (user-defined), you can ch ange th e password stored in the CMOS.
PCM-3370 User’s Manual 42 4.2.11 Quit without saving Selecting this option and pressing <E nter> lets you Quit the Setup pro- gram without recording any new values or changing old ones.
CHAPTER 5 AGP 4X Setup The PCM-3370 features an onboard AGP 4X flat panel/VGA interface. This chapter provides instructions for installing and oper ating the software drivers on the included display driver diskette.
PCM-3370 User’s Manual 44 Chapter 5 AGP 4X Setup 5.1 Introduction The PCM-3370 has an onboard AGP fl at panel/VGA interface. The spec- ifications and features are described as follows: 5.1.1 Chipset The PCM-3370 u ses a VIA Twister 8606T chipset from V IA Technology Inc.
45 Chapter 5 5.1.4 Dual/Simultaneous Display The PCM-3370 uses a VIA Twister VT8606T LCD controller that is capable of providing simultaneous dual view display of the same conten t on a flat panel and CRT. To set up dual view (simultaneus mode) under Windows 9x, Windows ME, Windows NT/2000/XP , follow these steps: Step 1.
PCM-3370 User’s Manual 46 5.2 Installation of the SVGA Driver Complete the followin g steps to install the SVGA driver. Follow the pro- cedures in the flow char t that apply to the operating syst em that you are using within your PCM-3370. 5.2.1 Installation for Windows 95 1.
47 Chapter 5 2. Choose the "Adapter" tab, then press the "Change..." button. 3. Press the "Have Disk" button..
PCM-3370 User’s Manual 48 4. Type in the path: D:vgaVT8606Win9x_Me 5. Select the highl ighted item, and click the "OK" butto n..
49 Chapter 5 6. "S3 GraphicsTwister" appears under the adapte r tab. Click the "Apply" button, then the "OK" butto n. 7. Press “Yes” to reboot.
PCM-3370 User’s Manual 50 5.2.2 Installation for Windows 98/Me 1. Select "Start", "Set tings", "Control Panel" , "Display", and "Set- tings," then press the "Advanced.
51 Chapter 5 2. Select “Adapter,” then “Change.”.
PCM-3370 User’s Manual 52 3. Press “Next,” then “Display a list....” 4. Press the “Have disk...” button..
53 Chapter 5 5. Insert the CD into the CD-RO M drive. Type in the path D:vgaVT8606Win9x_Me Then press “OK” 6. Select the highl ighted item, then click “OK.
PCM-3370 User’s Manual 54 7. "S3 Graphics Twister"ap pears und er the adapter tab. Click the "Apply" button. 8. Press “Yes” to reboot.
55 Chapter 5 5.2.3 Installation for Windows NT 1. Select "Start", "Set tings", "Control Panel" and doub le click the "Display" icon. Note: Service Pack X (X = 3, 4, 5, 6,...) must be installed first, before you install the Windows NT VGA driver.
PCM-3370 User’s Manual 56 2. Choose the "Settings" tab, and press the "Display Type" button..
57 Chapter 5 3. Press the "Change..." butto n..
PCM-3370 User’s Manual 58 4. Click the "Have Disk ..." button. 5. Type the path: D:vgaVT8606Win NT Press the "OK" button..
59 Chapter 5 6. Select the highl ighted item, and click the "OK" butto n. 7. Press "Yes" to proceed. 8. Press "OK" to reboot.
PCM-3370 User’s Manual 60 5.2.4 Installation for Windows 2000 1. Select "System", "Set tings", "Control Panel" and doub le click the "system" icon.
61 Chapter 5 2. Choose the "Video Controll er (VGA Compatible)” button..
PCM-3370 User’s Manual 62 3. Choose the "Drive" but ton, press “Update Driver...” button..
63 Chapter 5 4. Choose "Display a list of..." , then press “Next” button. 5. Choose “Display adapters ”, press “Next” button..
PCM-3370 User’s Manual 64 6. Click the “Have Disk” button. 7. Type the path D:vga VT8606Win2000 press the “OK” button..
65 Chapter 5 8. Press “Finish" to reboot. 5.2.5 Installation for Windows XP 1. Select "System", "Set tings", "Control Panel" and doub le click the "system" icon.
PCM-3370 User’s Manual 66 2. Choose “Hardware” and “Device Manager”, press “OK” button..
67 Chapter 5 3. Choose “Video Controller (VGA Compatible), press “OK” button..
PCM-3370 User’s Manual 68 4. Choose "Driver”, “Updat e Driver”, press “OK” butt on. 5. Choose “Install from a list.....” , press “Next”.
69 Chapter 5 6. Choose “Don’t search. I wil l....”, press “Next” button. 7. Choose “Display adapters ”, press “Next” button..
PCM-3370 User’s Manual 70 8. Type the path D:vga VT8606WinXP then press “OK” button. 9. Choose “S3 Graphics Twister + S3 Hotkey” then press “Next” but- ton.
71 Chapter 5 10. Press “Finish" to reboot. 5.3 Further Information For further information about the AGP/VGA installation in yo ur PCM- 3370, includi ng driver updates, tro ubleshooti ng guides and FAQ lists, visit the following web resources: VIA website: www.
PCM-3370 User’s Manual 72.
CHAPTER 6 PCI Bus Ethernet Inter- face This chapter provides i nformation on Ethernet configuratio n. • Introduction • Installation of Ethernet dri ver for - MS-DOS - Windows 3.
PCM-3370 User’s Manual 74 Chapter 6 PCI Bus Ethernet Interface 6.1 Introduction The PCM-3370 is equipped with a high-performance 32-bit Ethernet chipset which is fully compliant wit h IEEE 802.3 100 Mbps CSMA/CD standards. It is supported by major network operating systems.
75 Chapter 6 6.2.2 Installation for Windows 95 1. a. Select Start/Settings/Control Panel b. Double click "Network". 2. a. Click "Add" and prepare to install network functions.
PCM-3370 User’s Manual 76 3. a. Select the "Adapter" it em to add the Ethernet card. 4. Click "Have Disk" to install the driver. 5.
77 Chapter 6 6. a. Choose the "Realtek" item b. Click "OK" 7. a. Make sure the configurations of relative items are set correctly b.
PCM-3370 User’s Manual 78 6.2.3 Installation for Windows 2000 Step 1. Open Device Manager,.
79 Chapter 6 Step 2..
PCM-3370 User’s Manual 80 Step 3. Step 4..
81 Chapter 6 Step 5. Step 6..
PCM-3370 User’s Manual 82 Step 7. Step 8..
83 Chapter 6 Step 9 6.2.4 Installation for Windows NT 1. a. Select Start/Settings/Control Panel. b. Double click "Network"..
PCM-3370 User’s Manual 84 2. a. Choose the "Adapters" label. b. Click the "Add" button..
85 Chapter 6 3 a. Press "Have Disk". 4. a. Type "D:". b. Press "OK". 5. a. Insert the CD into the D: drive. b. Fill in: D:LAN8139C WINNT4 c.
PCM-3370 User’s Manual 86 6. a. Choose the "Realtek" item. b. Press the "OK" button. 7. a. Make sure the configurations of relevant items are set correctly.
87 Chapter 6 6.3 Further information Realtek website: www.realtek.com Advantech websites: www.advantech.com www.advantech.com.tw.
PCM-3370 User’s Manual 88.
Appendix A Programming the Watchdog Timer The PCM-3370 is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standsti ll for whatever rea- son. This feature ensures system reli- ability in industrial standalon e or unmanned enviro nments.
PCM-3370 User’s Manual 90 Appendix A Programming the Watchdog Timer A.1 Programming the watchdog timer The following example show ho w you might program the watchdog timer in Assembly: 1. Watch Dog Timer Enable Port 404e Bit7 set "o" to enable PCM-3370 Watch Dog Timer Ex: Mov DX, 404e Mov AL, 7F Out DX, AL 2.
Appendix B Jumper Settings The PCM-3370 is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for any reason . This feature ensures sy stem reliability in industrial standalone or unman ned environments.
PCM-3370 User’s Manual 92 Appendix B PCM-3370F Jumper Settings Table B.1: Connectors 1. CN1 Reset Connect 2. CN2 Invert Power Connect 3. CN3 IR Connect CN4 FAN Connector 5. CN5 LAN Connector 6. CN6 422/485 Connect 7. CN7 40-pin LCD Port (24bit) 8. CN8 CRT Connect 9.
93 Appendix B B.1 CN1 Reset Connector B.2 CN2 Inverter Power Connector Table B.2: CN1 Reset Connector Pin Pin name 1 Signal 2G N D Table B.3: CN2 Inverter Power Connector 1 +12V 2G N D 3 ENABKL 4 VBR .
PCM-3370 User’s Manual 94 B.3 CN3 IR Connector B.4 CN4 FAN Connector Table B.4: IR Connector 1+ 5 V 2N C 3 IRRX 4G N D 5I R T X Table B.5: CN4 FAN Connector 1 SPEED DETECT 2+ 5 V 3G N D 54 2 31 3 21.
95 Appendix B B.5 CN5 LAN Connector Table B.6: CN5 LAN Connector Pin Pin name 1 VCC_LAN 2A C T L E D 3R X + 4R X - 5L I L E D 6G N D 7N C 8G N D 9T X + 10 TX- 4 5 3 6 12 8 10 7 9.
PCM-3370 User’s Manual 96 B.6 CN6 422/485 Connector B.7 CN7 40-Pin LCD Port (24bit) Table B.7: CN6 422/485 Connector 1 RX485- 2 RX485+ 3 TX485+ 4 TX485- Table B.8: CN7 40-Pin LCD Port (24bit) Pin Pin name Pin Pin name 1 L CD VDD(+5V) 2 LCD VDD(+5V) 3 GND 4 GND 5 L CD VDD(+3.
97 Appendix B B.8 CN8 CRT Connector 35 SHFCLK 36 FLM(V-SYNC) 37 M/(DE) 38 LP(H-SYNC) 39 ENABKL 40 ENVEE Table B.9: CN8 CRT Connector 1R E D 2 DDC POWER(+5 V) 3 GREEN 4G N D 5B L U E 6N C 7N C 8 DDC DA.
PCM-3370 User’s Manual 98 B.9 CN9 USB Connector Table B.10: CN9 USB Con nector 1+ 5 V 2+ 5 V 3D 0 - 4D 1 - 5D 0 + 6D 1 + 7G N D 8G N D 9G N D 10 NC 3 1 10 8 6 4 2 5 7 9.
99 Appendix B B.10 CN10 20-Pin LC D Connector (36-bit) B.11 CN11 PC /104+ Connector Table B.11: CN10 20-Pin LCD Connector (36-bit) Pin Pinname Pin Pinname 1G N D 2 G N D 3P D 2 4 4 P D 2 5 5P D 2 6 6 P D 2 7 7P D 2 8 8 P D 2 9 9 PD30 10 PD31 11 PD32 12 PD33 13 PD34 14 PD35 15 GND 16 GND 17 NC 18 SPCLK 19 PCIRST 20 SPDAT Table B.
PCM-3370 User’s Manual 100 9 SD0 +12V LA 17 DACKO* 10 IOCHRDY (KEY) MEMR* DRQ0 11 AEN SMEMW* MEMW* DACK5* 12 SA19 SMEMR* SD8 DRQ5 13 SA18 IOW* SD9 DACK6* 14 SA17 IOR* SD10 DRQ6 15 SA16 DACK3* SD11 D.
101 Appendix B B.12 CN12 44-P in IDE Connector Table B.13: CN12 44-Pin IDE Conn ector Pin Pinname Pin Pinname 1R e s e t 2 G N D 3D 7 4 D 8 5D 6 6 D 9 7D 5 8 D 1 0 9D 4 1 0 D 1 1 11 D3 12 D12 13 D2 14.
PCM-3370 User’s Manual 102 B.13 CN13 COM2 RS232 Connector B.14 CN14 LPT Connector Table B.14: CN13 COM2 RS232 Connector Pin Pin name 1D C D 2D S R 3R x D 4R T S 5T x D 6C T S 7D T R 8R I 9G N D 10 N/C Table B.
103 Appendix B B.15 CN15 Power Conector 17 Data 7 18 G ND 19 ACK- 20 GND 21 BUSY 22 GND 23 PaperEmpty 24 GND 25 SELECT 26 N/C Table B.16: CN15 Power Conector 1+ 5 V 2+ 5 V 3+ 5 V 4G N D 5G N D 6G N D .
PCM-3370 User’s Manual 104 B.16 CN16 COM1 RS232 Connector Table B.17: CN16 COM1 RS232 Connector Pin Pin name 1D C D 2D S R 3R X D 4R T S 5T X D 6C T S 7D T R 8R I 9G N D 10 N/C 4 5 3 6 12 8 10 7 9.
105 Appendix B B.17 CN17 KB/MS Connector B.18 CN18 ATX Power Connector Table B.18: CN17 K B/MS Connector Pin Pin name 1 KB CLOCK 2 KB DATA 3M S C L O C K 4G N D 5+ 5 V 6M S D A T A Table B.
PCM-3370 User’s Manual 106 B.19 CN19 Power Switch Connector B.20 CN20 Negative Power Input B.21 CN21 Compact Flash Slot Table B.20: CN19 Power Switch Connector Pin Pin name 1 Signal 2G N D Table B.21: CN2 0 Negative Power Inp ut Pin Pin name 1- 5 V 2G N D 3- 1 2 V Table B.
107 Appendix B 11 A08 12 A07 13 +5 V 14 A06 15 A05 16 A04 17 A03 18 A02 19 A01 20 A00 21 D00 22 D01 23 D02 24 *IOCS16 25 *CD2 26 *CD1 27 D11 28 D12 29 D13 30 D14 31 D15 32 *CS1 33 *VS1 34 *IORD 35 *IO.
PCM-3370 User’s Manual 108 B.22 CN22 RTC Connector B.23 JP1 COMS Charge&Discharge B.24 JP2 Watchdog Timer Table B.23: CN22 R TC Connector Pin Pin name 1 Signal 2G N D Table B.24: JP1 COMS Charge&Discha rge Pin Function 1-2 Charge * 2-3 Discharge Table B.
109 Appendix B B.25 JP3 PCI VIO Select B.26 JP4 COM1 RI Input Select Table B.26: JP3 PCI VIO Select Pin Function 1-2 VCC 2-3 VCC3 Default NULL * Table B.
PCM-3370 User’s Manual 110 B.27 JP5 COM2 RI Input Select Table B.28: JP5 COM2 RI Input Select Pin Function 1-2 RI * 2-3 VCC 123 1 23 RJ* VCC.
Appendix C System Assignments • System I/O ports • DMA channel assignment s • Interrupt assignments.
PCM-3370 User’s Manual 112 Appendix C System Assignments C.1 System I/O ports Table C.1: System I/O ports Addr. range (Hex) Device 000-01F DMA controller (slave) 020-03F Interrupt controller 1, (mas.
113 Appendix C C.2 DMA channel assignments 443 Watchdog timer ** default setting Table C.2: DMA channel assignments Channel Function 0 Available 1 Available 2 Floppy disk (8-bit transfer) 3 Parallel**.
PCM-3370 User’s Manual 114 C.3 Interrupt assignments Table C.3: Interrupt assignments Interrupt# Interrupt source NMI Parity error detected IRQ 0 Interval timer IRQ 1 Keyboard IRQ 2 Interrupt from c.
115 Appendix C C.4 1st MB memory map Table C.4: 1st MB mem ory map Addr. rang e (Hex) Device F000h - FFFFh System ROM E000h - EFFFh Reserved for BIOS boot CC00h - DFFFh available C000h - CB00h VGA BIO.
PCM-3370 User’s Manual 116.
An important point after buying a device Intel PCM-3370 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel PCM-3370 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel PCM-3370 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel PCM-3370 you will learn all the available features of the product, as well as information on its operation. The information that you get Intel PCM-3370 will certainly help you make a decision on the purchase.
If you already are a holder of Intel PCM-3370, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel PCM-3370.
However, one of the most important roles played by the user manual is to help in solving problems with Intel PCM-3370. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel PCM-3370 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
