Instruction/ maintenance manual of the product MIC-3358 Intel
Go to page of 84
MIC-3358 6U CompactPCI Intel ® Pentium ® 4 Processor - M Single Board Computer with VGA / Dual Giga LAN / PMC User ’ s Manual.
MIC-3358 User’s Manual ii Copyright Notice This document is copyrighted, 200 3. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time wi thout notice.
iii CE Notificatio n The MIC-3358, developed by Advantech CO., L TD., ha s passed the CE test for environment specification wh en shielded cables are used for external wiring.
MIC-3358 User’s Manual iv Packing List Before installing yo ur board, ensure that the following materials have been received: • 1 MIC-3358 all-in-one single board computer • 1 Utility CD-ROM dis.
v Contents Chapter 1 Hardware Co nfiguration ................................. 2 1.1 Introduction ............ ............................ ............ ........... ........ 2 1.2 Specifications ............ .............. .............. .............
MIC-3369 User’s Manual vi 2.2 VGA Display Connector (CN9 or Rear I/O) ................... 26 2.3 PS/2 Keyboard and Mouse Connector (R ear I/O) ........... 26 2.4 Serial Ports (CN3 and Rear I/O) ...... .............. .............. ... 27 Table 2.1:MIC-3358 serial port default setti ngs .
vii Wizard"41 Figure 3.19:Click "Next" in th e windows ......... ............ 42 Figure 3.20:Click "Yes , I ha ve already connected the hardware"42 Figure 3.21:Select "Add a new hardware device" in the installed hardware window43 Figure 3.
MIC-3369 User’s Manual viii B.2 J2 Connector .............. .............. ................. .............. ......... 71 Table B.2:J2 connector .. ................ ............ ........... ........ 71 B.3 J3 Connector .............. .............. .
CHAPTER 1 Hardware Configuration.
MIC-3358 User’s Manual 2 Chapter 1 Hardware Configuration 1.1 Introduction The MIC-3358 is a CompactPCI® server blade with Intel® Pentium® 4 Processor-M on board to complian t with Compact Packet Switching Backplane (cPSB) systems. Support ing the PICMG 2.
3 Chapter 1 PMC (PCI Mezzanine Card ) IEEE1386.1 Compliant The MIC-3358 supp ort one PMC site and compliant with PICMG 2.3 (PCI Mezzanine Card) specification. This 32-bit/33MHz PMC interface provides front access capability by PMC modules for various function demandin g.
MIC-3358 User’s Manual 4 • Chipset: Intel® 845E/ICH 4 Chipset • Front Side Bus: 400MHz (Intel® Pentium® 4 processor-M Processor) • Bus Interface: PCI 32-bit/33 MHz • 2nd level cache: Built-in 512KB on Intel® Pentium ® 4 processor-M die • RAM: 512MB ECC DDR26 6 memory on board.
5 Chapter 1 • Display memory: 8MB SDRAM VRAM • Display Resolution Number of Colors: : Optional R ear I/O Board s • RIO-3309C NOTE: MIC-3358 does not support MIC-39 60 storage carrier board Mecha.
MIC-3358 User’s Manual 6 1.3 Functional Block Diagram Figure 1.1: MIC-3358 fu nctional block diagram. Note: MIC-3358 does not support shutdown function of A TX power supp ly . 1.4 Jumpers 1.4.1 Jumper Locations T able 1-1 lists the jumper functi on.
7 Chapter 1 1.4.2 Clear CMOS (JP4) This jumper is used to erase CMOS data and reset system BIOS informa- tion. Follow the procedures below to clear the CMOS. 1. T urn off the system. 2. Close jumper JP4 (1-2) for about 3 seconds. 3. Set jumper JP4 (2-3) as normal.
MIC-3358 User’s Manual 8 1.5 Connectors On-board connectors link to external devices such as hard disk drives, keyboards, or floppy drives, etc. T able 1-6 lists the function of each con- nector and Figure 1- 1 and Figure 1-2 illustrate each connector location.
9 Chapter 1 T able 1.7: CN1 IDE Connector Definitions Pin Signal Pin Signal 1P R S T # 2 G N D 3P I D 7 4 P I D 8 5P I D 6 6 P I D 9 7P I D 5 8 P I D 1 0 9P I D 4 1 0 P I D 1 1 1 1 PID3 12 PID12 13 PI.
MIC-3358 User’s Manual 10 T able 1.8: CN2 CompactFlash™ Socket Definitions Pin Signal Pin Signal 1 GND 26 N/C 2I D 3 2 7 I D 1 1 3 ID4 28 ID12 4 ID5 29 ID13 5 ID6 30 ID14 6 ID7 31 ID15 7 HCS1- 32 .
11 Chapter 1 T able 1.9: CN3 RJ-45 COM1 port Definitions Pin Signa l 1 NRLSD1 2 NRX1 3N T X 1 4 NDTR1 5G N D 6 NDSR1 7N R T S 1 8 NCTS1.
MIC-3358 User’s Manual 12 Note: Pin 1-2 handle closed Pin 1-3 handle open Note: Hand le closed is normal Figure 1.2: Handle Swit ch Definitions T able 1.
13 Chapter 1 T able 1.1 1: CN5 USB 1.1/2.0 port Definitions Pin Signal 1+ 5 V 2 USB_P2- 3 USB_P2+ 4G N D T able 1.12: CN6 USB 1.1/2.0 port De finitions Pin Signal 1+ 5 V 2 USB_P2- 3 USB_P2+ 4G N D.
MIC-3358 User’s Manual 14 T able 1.13: CN9 DB-15 VGA Connector Definitio ns Pin Signal 1R E D 2G R E E N 3B L U E 4N / C 5G N D 6G N D 7G N D 8G N D 9 N/C (VGA V CC) 10 GND 11 N / C 12 VGA_SDA 13 HSYNC 14 VSYNC 15 VGA_SCL T able 1.
15 Chapter 1 3M D I A X 2 + 4M D I A X 3 + 5M D I A X 3 - 6M D I A X 2 - 7M D I A X 4 + 8M D I A X 4 - The LED indicator means Left Right 10Mbps Off flick active/link mode 100Mbps Green 1000Mbps Orange T able 1.
MIC-3358 User’s Manual 16 33 FRAME# 34 GND 35 GND 36 IRDY# 37 DEVSEL# 38 +5V 39 GND 4 0 LOCK# 41 SDONE# 42 SBO# 43 P AR 44 GND 45 V(I/O) 46 AD15 47 AD12 48 AD1 1 49 AD9 50 +5V 51 GND 5 2 C/BE 0# 53 .
17 Chapter 1 41 +3.3V 42 SERR# 43 C/BE1# 44 GND 45 AD14 46 AD13 47 GND 48 AD10 49 AD8 50 +3.3V 51 AD7 52 N/C 53 +3.3V 54 N/C 55 N/C 56 GND 57 N/C 58 N/C 59 GND 60 N/C 61 ACK64# 62 +3.
MIC-3358 User’s Manual 18 47 CMM1_SCL 48 CMM1_SDA 49 CMM2_SCL 50 CMM2_SDA 51 BMC_BD_SEL 52 N/C 53 N/C 54 N/C 55 BMC_LEDA 56 BMC_LEDL 57 GND 58 GND 59 BMC_TX+ 60 BMC_RX+ 61 BMC_TX- 62 BMC_RX- 63 GND 64 GND T able 1.16: D9 LED Definitio ns Green Power Status Y ellow HDD Status T able 1.
19 Chapter 1 It's automatic selection wh en SW1-1~SW1-6 are all OFF . PS: X means either ON or OFF . SW1- 6 SW1- 5 SW1- 4 SW1- 3 SW1- 2 SW1- 1 VCORE OFF X X X X X AUTO ON ON O N ON ON ON 1.750V ON ON ON ON ON OF F 1.700V ON ON ON ON OFF ON 1.650V ON ON O N ON OFF OFF 1.
MIC-3358 User’s Manual 20 When SW2 is ON, then the board is se lected as drone mode. The rest of the combination is reserved for other modes. Please refer to Appendix B for J1/2/3/5 pin assignments. Figure 1.3: MIC-3358 jumper and connector locations.
21 Chapter 1 Figure 1.4: MIC-3358 front panel connector and indicator locations 1.6 Safety Precautions Follow these simple precautions to pr otect yourself from harm and the products from damage.
MIC-3358 User’s Manual 22 1. T o avo id electric shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while th e PC is on. 2. Disconnect power before making any configu ration changes.
23 Chapter 1 Figure 1.5: Complete assembly with heat sink and hard disk 1.8 Software support The MIC-3358 comes with a utilit y CD-ROM disc, which includes driv- ers and utility programs of Gigabit Ethernet, IAA and VGA interfaces. The drivers support Windows 2000, XP and NT4.
MIC-3358 User’s Manual 24.
CHAPTER 2 Connecting Peripherals.
MIC-3358 User’s Manual 26 Chapter 2 Connecting Peripherals 2.1 IDE Device (CN1 and Rear I/O) The MIC-3358 provides two IDE (Integrat ed Device Electronics) chan- nels via CN1 connector in MIC-3358 or via the J3 connector to the rear transition board (RIO -3309C).
27 Chapter 2 2.4 Serial Ports (CN3 and Rear I/O) The MIC-3358 offers one serial ports: COM1 in RS-232. W ith limited front panel access, one COM1 (CN3) can be connected via a RJ-45 to RS- 232 adaptor and COM2 (CN9) interface has to be connected via rear I/O module (RIO-3309C) for implement .
MIC-3358 User’s Manual 28 2.6 USB Connector (CN5/6 and Rear I/O) The MIC-3358 provides two USB (Universal Serial Bus) 2.0 chann els either via two front USB ports (CN5 and CN6) in MIC-3358 or via J5 connector to one USB c onnector (CN8) in real transition board.
29 Chapter 2 of MIC-3358 help you install and rem ove the card easily and safely . Fol- low the procedure below to install the MIC-3358 into a chassis: T o install a card: 1. Hold the card vertically . Be sure th at the card is pointi ng in the correct direction.
MIC-3358 User’s Manual 30.
CHAPTER 3 Driver Setup.
MIC-3358 User’s Manual 32 Chapter 3 3.1 Overview Advantech provides CD ut ility driv er in the package. Please install Chipset INF driver , VGA graphics driver , LAN driver and Intel® Appli- cation Accelerator (IAA) driver sequentially . The Intel® Application Accelerator is a performance software package of Intel® chipset s.
33 Chapter 3 3.3 CMM (Chassis Mana gement Module) Driver MIC-3358 supports MIC-3924B CMM. Pl ease inst all driver as following procedur e. 3.3.1 Windows 2K Driver Figure 3.1: Right Click "My Computer" and click "Properties" Figure 3.
MIC-3358 User’s Manual 34 Figure 3.3: click "Next" in Hardware Wizard Figure 3.4: click" Add/Troubleshoot a device".
35 Chapter 3 Figure 3.5: sel ect " Add a new device" in Device windows Figure 3.6: click "No, I want to select the hardware from a list".
MIC-3358 User’s Manual 36 Figure 3.7: Select "Other devi ces" in Hardware types windo ws Figure 3.8: T ab " Have Disk" in right bot tom.
37 Chapter 3 Figure 3.9: Browse proper driver in CD ROM device Figure 3.10: click ok in the W izard wind ows.
MIC-3358 User’s Manual 38 Figure 3.1 1: click " ok" in Add N ew Hardware Wi zard Properties" windows Figure 3.12: click "yes" in Creati ng a Forced Conf iguration windows.
39 Chapter 3 Figure 3.13: click "Next" in Add/Remove Hardware Wizard windows Figure 3.14: T ab "Finish" in Add/Remove Hardw are W iza rd windows.
MIC-3358 User’s Manual 40 Figure 3.15: click "Y es" to restart your computer Figure 3.16: Go to Device Manager to see available A-IPM drivers.
41 Chapter 3 3.3.2 Windows XP Driver Figure 3.17: Right click My Computer to select "Properties" Figure 3.18 : T ab "Hardw are" and cli ck "Add Ha rdware W izard".
MIC-3358 User’s Manual 42 Figure 3.19: Click " Next" in the windows Figure 3.20: Click "Y es , I have already connected the hardware".
43 Chapter 3 Figure 3.21: Select "Add a new hardware device" in the installed hardware window Figure 3.22: Click Install the hardware that I manually select from a list (Advanced).
MIC-3358 User’s Manual 44 Figure 3.23: Select "Show all devices " in Common hardware types windows Figure 3.24: tab "Have Disk".
45 Chapter 3 Figure 3.25: Select proper driver in CD-ROM Figure 3.26: tab A-IPM driver and click "Have Disk".
MIC-3358 User’s Manual 46 Figure 3.27: Click " Next" Figure 3.28: Click "Finish".
47 Chapter 3 Figure 3.29: Go to My computer to see "A-IPM dr ivers".
MIC-3358 User’s Manual 48.
CHAPTER 4 A ward BIOS Setup.
MIC-3358 User’s Manual 50 Chapter 4 A ward BIOS Setup 4.1 A W ARD BIOS Setup Once you enter A ward® BIOS CMOS Setup Util ity , the Main Menu (Fig- ure 4-1) will appear on the screen. The Main Menu allows you to select from nine setup fun ctions and two exi t choices.
51 Chapter 4 4.1.2 Standard CMOS Setup The items in Standard CMOS Setup Menu are divided into 11 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in ea ch item.
MIC-3358 User’s Manual 52 Figure 4.3: Advance BIOS features setup screen V irus W arning During and after the system boots up, any attempt t o write to the boot sec- tor or partition table of the hard disk drive will halt the system. If this happens, a warning message will be displayed.
53 Chapter 4 First/Second/Third Boot De vice and Boot Other Device The BIOS attempts t o load the operat ing system from the devices in the sequence selected in these items. The settings are Floppy , LS120, HDD - 0, SCSI, CDROM, HDD-1, HDD-2, HDD-3 , ZIP100, USB-FDD, USB- ZIP , USB-CDROM, USB-HD D, LAN and Disabled .
MIC-3358 User’s Manual 54 T ypematic Rate Setting Key strokes repeat at a rate determin ed by the keyboard cont roller . When enabled, the typematic rate and type matic delay can be selected. The set- tings are: Enabled/ Disabled. Default is Disabled.
55 Chapter 4 Small logo (EP A) show Default is Disabled. 4.1.4 Advance Chipset Features Setup The Advanced Chipset Features Setup opt ion is used to change the values of the chipset registers. These registers control most of the system options in the computer .
MIC-3358 User’s Manual 56 This field lets you insert a timi ng delay between the CAS an d RAS strobe signals, used when DRAM is written to, read from, or refreshed. Fast gives faster performance; and Slow gives more stable perform ance. This field applies on ly when synchro nous DRAM is installed in the system .
57 Chapter 4 Delayed T ransaction The chipset has an embedded 32-bit posted write buffer to support delay transactions cycles. Select Enabled to support compliance with PCI spec- ification ver sion 2.1. The settings are: Enabled (Defau lt) and Disabled.
MIC-3358 User’s Manual 58 On-Chip Primary/Secondary P CI IDE The integrated peripheral controller contains an IDE interface with sup- port for two IDE channels. Select En abled to activate each channel sepa- rately . The settings are: Enabled (Default) and Disabled.
59 Chapter 4 SMBus Connector Users can select IPMI sour ce and application as below . There are 3 options: MIC-3924B (Default), MIC-39 24A and CMM. LAN 1 Connector The item allows you to choice LAN1 connectiv e way . There are 3 options: Front (Default), 2.
MIC-3358 User’s Manual 60 The Serial Port 2 settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/ IRQ3 (Default), Disabled, Auto. Onboard Parallel Port There is a built-in parallel port on the on-board Super I/O chipset that provides Standard, ECP , and EPP features.
61 Chapter 4 ACPI Function This category allows you to select ACPI power management effective or not. The options: Enabled (Default) and Disabled. 4.1.
MIC-3358 User’s Manual 62 operating system such as Windows® 95/98. If you set this field to "man- ual" choose specific resources by going into each of the sub menu that follows this field (a sub menu is preceded by a "y"). The settings are: Auto (ESCD) (Default ), Manual.
63 Chapter 4 Load Optimized Defa ults (Y/N) ? N Pressing 'Y' loads the default values that are factory se ttings for optimal performance system operations. 4.1.10 Set Password T o change, confirm, or disable th e password, choose the "P ASS-WORD SETTING" option form the Setup main menu and press [Enter].
MIC-3358 User’s Manual 64.
Appendix A Programming the W atchdog T imer.
MIC-3369 User’s Manual 66 Appendix A A.1 Programming the W atchdog Timer T o program the watchdog tim er , yo u must write a program which writes a value to I/O port address 443 (hex). This output value represent s time interval. The value range is from 01 (h ex) to FF (hex), and the related time interval is 1 sec.
67 Chapter A 1070 RETURN 2000 REM Subroutine #2, your application task • • • 2090 RETURN..
MIC-3369 User’s Manual 68.
Appendix B Pin Assignments.
MIC-3358 User’s Manual 70 Appendix B Pin Assignments B.1 J1 Connector #: Low active T able B.1: J1 connector Pin Z A B C D E F 25 GND +5V REQ64# ENUM# +3.3V +5V GND 24 GND AD[1] +5V V(I/O) AD[0] ACK64# GND 23 GND +3.3V AD[4] AD[3] +5V AD[2] GND 22 GND AD[7] GND +3.
71 Chapter B B.2 J2 Connector #: Low active Note: GA[4...0] sh all be used for geograph ic addressing on the back plane T able B.2: J2 connector Pin Z A B C D E F 22 GND GA4 GA3 GA2 GA1 GA0 GND 21 GN .
MIC-3358 User’s Manual 72 B.3 J3 Connector #: Low active T able B.3: J3 connector Pin Z A B C D E F 19 GND NC NC NC NC NC GND 18 GND MDIA0+ MDIA0- GND MDIA2+ MDIA2- GND 17 GND MDIA1+ MDIA1- GND MDIA.
73 Chapter B B.4 J5 Connector T able B.4: J5 connector Pin Z A B C D E F 22 GND I CH_RX+ ICH_RX- GND ICH_TX+ ICH_TX- GND 21 GND BMC_RX + BMC_RX- GND BMC_TX+ BMC_TX- GND 20 GND GND GND USBD1- GND GND G.
MIC-3358 User’s Manual 74 B.5 System I/O Ports T able B.5: System I/O ports Address range (Hex) Device 000-00F Direct memory access controlle r 000-CF7 PCI bus 010-01F Motherboard resources 020-021 .
75 Chapter B B.6 Interrupt Assignments B.7 1st MB Memory Map 4000-40BF Motherboard resources 5000-501F Intel® 82801DB/DBM SMBus cont roller -24C3 C000-C0FF A TI T echnologies Inc.
MIC-3358 User’s Manual 76.
An important point after buying a device Intel MIC-3358 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel MIC-3358 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel MIC-3358 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel MIC-3358 you will learn all the available features of the product, as well as information on its operation. The information that you get Intel MIC-3358 will certainly help you make a decision on the purchase.
If you already are a holder of Intel MIC-3358, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel MIC-3358.
However, one of the most important roles played by the user manual is to help in solving problems with Intel MIC-3358. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel MIC-3358 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
