Instruction/ maintenance manual of the product EE110EM Intel
Go to page of 21
Intel Express 10/100 Stackable Hub Fiber and Ethernet Modules User Guide.
Copyright © 1997, Intel Corporation. All rights reserved. Intel Corporation, 5200 NE Elam Young Parkway, Hillsboro OR 97124-6497 Intel Corporation assumes no responsibility for errors or omissions in this manual. Nor does Intel make any commitment to update the information contained herein.
1 Xmt Link Rcv Coll 1. Turn off the power, then unscrew and remove the panel from an expansion slot on the Express 10/100 Stackable Hub. 2. Plug either the Ethernet Module or the Fiber Module into a slot, using the retaining screws to secure the module to the hub.
3 Contents Overview .................................................................................................................................................. 3 Ethernet Module ..................................................................
4 Ethernet Module The Ethernet Module acts as a switch port plugged into an Express 10/100 Stackable Hub. The Ethernet Module • bridges Express 10/100 Stackable Hubs running at 10 Mbps to hubs running at 100 Mbps. • connects Express10/100 Stackable Hubs running at 100 Mbps to each other with TPE cable (creating separate collisions domains).
5 Example configurations These two example configurations show the combinations of duplex and speed LEDs. Bridging hubs running at 100 Mbps to hubs at 10 Mbps This Ethernet Module is plugged into a hub running at 100 Mbps. The module is then connected to a 10 Mbps hub by CAT 3, 4, or 5 TPE cable.
6 Connecting 100 Mbps hubs with TPE cab le Class I hubs, such as the Intel Express 10/100 Stackable Hub, cannot be directly connected with TPE cable when running at 100 Mbps. However, since the Ethernet Module acts as a switched port on a hub, you can use it to connect to another 100 Mbps hub with TPE cable.
7 NOTE A long press is held for 2 seconds or more. A short press is held for less than 2 seconds. Connecting to a de vice at full-duple x Express 10/100 Stackable Hubs operate at half-duplex. The only way to connect to a device at full-duplex is with an Ethernet Module.
8 Connecting to a server at full-duplex This is an Ethernet Module plugged into a hub running at 10 or 100 Mbps. The module is then connected to a server with an Intel EtherExpress™ PRO/100 LAN Adapter using CAT 5 TPE cable. Use the MDI-X connector on the Ethernet Module.
9 Under standing Ethernet Module LEDs The LEDs on the Ethernet Module provide information about the module’s configuration and status. Port LEDs The LEDs above a port on the Ethernet Module provide information about the port’s configuration and status.
10 Change duplex button and LEDs You can determine the Ethernet Module’s duplex configuration and status from the duplex LEDs. Use the Change duplex button to cycle among duplex modes. Attach any Express 10/100 Stackable Hub to the Ethernet Module and the module will automatically negotiate the correct duplex setting (always half-duplex).
11 Change speed button and LEDs You can determine the speed of the connection between the Ethernet Module and device from the speed LEDs. Use the Change speed button to cycle among speed settings. Attach any Express 10/100 Stackable Hub to the Ethernet Module and the module will automatically negotiate the correct speed.
12 NOTE At half-duplex, you can con- nect hubs up to 160 meters apart. At full-duplex, you can con- nect hubs up to 2 km apart. Fiber Module The Fiber Module acts as a switched port plugged into an Express 10/100 Stackable Hub.
13 NOTE A long press is held for 2 seconds or more. A short press is held for less than 2 seconds. Connecting to a de vice at full-duple x Not all device manufacturers implement auto-negotiation of duplex mode. To ensure the Fiber Module connects to the device at full- duplex, force the duplex mode to full-duplex.
14 Connecting to a switch at full-duplex Fiber Module Auto-negotiate Full-duplex Half-duplex Change duplex Xmt Link Rcv Coll TX RX This is a Fiber Module plugged into a hub running at either 10 or 100 Mbps. The module is then connected to an Intel Express 10/100 Fast Ethernet Switch at full-duplex using 62.
15 Under standing Fiber Module LEDs The LEDs on the Fiber Module provide information about the module’s configuration and status. Duplex LEDs You can determine the Fiber Module’s duplex configuration and status from the duplex LEDs. Use the Change duplex button to cycle among duplex modes.
16 Transmit/Receive/Link/Collision LEDs LED Status Meaning Xmt (transmit) Blinking green Port is transmitting data. Off Port is not transmitting data. Rcv (receive) Blinking green Port is receiving data. Off Port is not receiving data. Link Solid green Port has a link.
17 Limited Hardware Warranty Intel warrants to the original owner that the hardware product delivered in this package will be free from defects in material and workmanship for three (3) years followin.
18 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
19 WARNUNG Das System wurde für den Betrieb in einer normalen Büroumgebung entwickelt. Der entwickelt. Der Standort sollte: · sauber und staubfrei sein (Hausstaub ausgenommen); · gut gelüftet und.
20 World Wide Web & Internet FTP Intel BBS Access Intel’s World Wide Web home page Use Intel’s Bulletin Board. Dial in by or download information using modem at 8-N-1, and up to 14.
An important point after buying a device Intel EE110EM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel EE110EM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel EE110EM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel EE110EM you will learn all the available features of the product, as well as information on its operation. The information that you get Intel EE110EM will certainly help you make a decision on the purchase.
If you already are a holder of Intel EE110EM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel EE110EM.
However, one of the most important roles played by the user manual is to help in solving problems with Intel EE110EM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel EE110EM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
