Instruction/ maintenance manual of the product 220T Intel
Go to page of 24
694466-001 Intel Expr ess 220T and 210T Stackable Hubs User Guide.
Copyright © 1998, Intel Corporation. All rights reserved. Intel Corporation, 5200 NE Elam Young Parkway, Hillsboro OR 97124-6497 Intel Corporation assumes no responsibility for errors or omissions in this manual. Nor does Intel make any commitment to update the information contained herein.
1 220T and 210T Overview ..................................................................... 2 Feature Comparison .............................................................................. 3 Understanding 220T Hubs ..............................
2 220T and 210T Overview Features This guide covers both the 12- and 24-port versions of the Intel ® Express 220T Stackable Hub and the Express 210T Stackable Hub (formerly known as the Express 10/100 Stackable Hub). Input 100-120VAC/2.5A 200-240VAC/1.
3 Featur e Comparison Express 220T (EE220TX12) Expr ess 220T (EE220TX24) Colls 10Mbps Colls 100Mbps RPS Power Intel Express 220T Stackable Hub Bridged Managed Enable/Disable Bridging Status Class I Le.
4 Understanding 220T Hubs 220T Port LEDs The LEDs above each port provide information about the port’ s configuration and status. LED Status Meaning Left Solid orange Device linked at 10Mbps. Solid green Device linked at 100Mbps. Blinking orange Receive activity at 10Mbps.
5 220T Hub LEDs The hub LEDs on the 220T indicate these conditions: collisions, status of internal bridging, if the hub is managed, and the condition of the hub’ s power supply .
6 Understanding 210T Hubs 210T Port LEDs The LEDs above each port provide information about the port’ s configuration and status. LED Status Meaning Left Solid green Port has a link. Blinking green Receive activity at port. Off No link detected. Right Solid yellow Port disabled by management (not applicable without optional Management Module).
7 210T Hub LEDs The 210T hub LEDs indicate these conditions: hub speed, collisions in the hub or stack of hubs, and whether the hub is managed. 10Base-T 100Base-TX Power Intel Express 210T Stackable Hub Collision Managed Status Change Hub Speed LED Status Meaning 10Base-T On Hub is operating at 10Mbps.
8 Connection Guidelines General • Ports on the 220T and 210T hubs are half-duplex. T o connect to a device at full-duplex, you must use the optional Ethernet or Fiber Modules. • 220T ports are autonegotiating and can operate at 10Mbps or 100Mbps. The hub matches the highest possible speed of an attached device.
9 Stacking Hubs Why Stack? The Express 220T and 210T hubs use the same connectors so they can be stacked together or stacked in combination with the Express 10/100 Stackable hub. By stacking Intel hubs you can: • increase the number of available ports, yet still treat the stack as a single repeater .
10 Bridging Segments Bridging 220T Hubs A bridge allows two segments to communicate with each other . T ypically , a bridge connects segments operating at different speeds, but it can also connect segments operating at the same speed.
11 Bridging 210T Hubs All ports on the Express 210T hub operate at the same speed (10Mbps or 100Mbps) so the hub belongs to only one segment at a time. The 210T hub doesn’t contain an internal bridge. T o communicate, the segments must be bridged by a 220T hub or by an external device (like a 10/100 switch).
12 Cabling Devices Media Requirements Incorrect cabling is often the cause of network configuration problems. Read the next two pages if you’re unsure of your requirements. 100Base-TX The 100Base-TX Fast Ethernet specification requires that you use CA T 5 UTP cabling to operate at 100Mbps.
13 Straight-through UTP cable Hub (MDI-X) Adapter (MDI) 10 0 4 Not used 4 Not used 5 Not used 5 Not used 7 Not used 7 Not used 8 Not used 8 Not used 1 (RX+) 1 (TX+) 2 (RX-) 2 (TX-) 3 (TX+) 3 (RX+) 6 (.
14 Can I stack Intel Express 220T Stackable Hubs with Intel Express 210T Stackable Hubs or Intel Express 10/100 Stackable Hubs? Y es. These hubs use the same Intel Cascade Cable and connectors. Can I stack Intel Express 220T or 210T Stackable Hubs with Intel Express 100Base-TX Stackable Hubs? No.
15 Can I daisy-chain a 100Mbps hub to the 220T hub with UTP cabling? No. Only hubs operating at 10Mbps can be daisy-chained to the 220T . Y ou must use an Intel Cascade Cable to connect Intel hubs operating at 100Mbps. Can I daisy-chain 210T hubs together with UTP cabling? Only if the hubs are operating at 10Mbps.
16 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
17 WARNUNG Das System wurde für den Betrieb in einer normalen Büroumgebung entwickelt. Der entwickelt. Der Standort sollte: · sauber und staubfrei sein (Hausstaub ausgenommen); · gut gelüftet und.
18 Har dwar e W arranty Limited Hardwar e W arranty Intel warrants to the original owner that the hardware product delivered in this package will be free from defects in material and workmanship for t.
19 Limited Hardwar e W arranty (Europe only) Intel warrants to the original owner that the hardware product delivered in this package will be free from defects in material and workmanship for three (3.
20 T r oubleshooting No link (left LED is off). • Remove the cable and plug it in again. W ait up to six seconds for a link. • Make sure you’re using the right type of cable (straight-through or crossover) for the device you want to connect to. If you’re using the wrong cable, the left LED above the port will not come on.
21 Automated Support Y ou can reach Intel’ s automated support services 24 hours a day , every day at no char ge. The services contain the most up-to-date information about Intel products. Y ou can access installation instructions, troubleshooting information, and general product information.
694466-001 Intel Expr ess 220T and 210T Stackable Hubs User Guide.
An important point after buying a device Intel 220T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel 220T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel 220T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel 220T you will learn all the available features of the product, as well as information on its operation. The information that you get Intel 220T will certainly help you make a decision on the purchase.
If you already are a holder of Intel 220T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel 220T.
However, one of the most important roles played by the user manual is to help in solving problems with Intel 220T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel 220T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
