Instruction/ maintenance manual of the product RDC-7.1 Integra
Go to page of 8
1 RDC-7.1 • For full details on using the RDC-7.1, refer to the main instruction manual. • For optimum surr ound playback, set the distance between the listener and the speakers so that the time it takes the sound to reach the listener is the same.
2 Y ou can connect the RDC-7.1 (PRE OUT A terminals) and the power amplifier through RCA terminals using RCA type audio pin cables. Also you can connect the amplifiers through XLR (Balanced) type terminals using XLR type cables. The figure below illustrates the connection to the RD A-7.
3 An appropriate option board [H] [I] should be installed to connect a TV or a projector . • This section describes the connections for displaying the video source or the operating information of the RDC-7.1 on a monitor device such as a TV or projector .
4 An appropriate option board [H] [I] should be installed to connect a D VD player . The description here guides you to make connection between the RDC-7.1 and your D VD player in a quickest way where no modification is required for the default settings of the unit.
5 Connecting to D VD player with i.LINK terminal Disconnect the cable when this type of connection is made on an IntegraRESEARCH/Onk yo D VD player . 1. Use the S400 4-pin i.LINK cable to connect the i.LINK (A UDIO) terminal on the RDC-7.1 to the i.LINK (A UDIO) terminal on the i.
6 Connecting to universal D VD player with Multichannel terminal (When an optional Multic hannel terminal board is installed on the RDC-7.1) 1. Make a connection f or digital audio signal. If your D VD player has optical output terminal: Use an optical cable to connect the RDC-7.
7 1. Plug the supplied power cord into the A C INLET . 2. Plug the other end of the power cord into the wall outlet. 3. Press the [Standby/On] b utton to turn on the RDC-7.1. Press the [On] button when using the remote con- troller . 4. T urn on your D VD player and TV .
SN 29343696 Printed in Japan D0411-1 (C) Copyright 2004 ONKY O CORPORA TION Japan. All r ights reserved. * 2 9 3 4 3 6 9 6 * Operating on the RDC-7.1: Use the [ ] DSP [ ] buttons to select a listening mode. Operating with the remote contr oller: Press the scroll wheel, and then press the listening mode button you w ant to select.
An important point after buying a device Integra RDC-7.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Integra RDC-7.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Integra RDC-7.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Integra RDC-7.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Integra RDC-7.1 will certainly help you make a decision on the purchase.
If you already are a holder of Integra RDC-7.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Integra RDC-7.1.
However, one of the most important roles played by the user manual is to help in solving problems with Integra RDC-7.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Integra RDC-7.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
