Instruction/ maintenance manual of the product DHC-80.2 Integra
Go to page of 10
1 Firmware Update for the DTR-80.2/70.2 and DHC-80.2 W e are pleased to offer this firmware update for th e best possible p erformance of your A V Receiver . A firmware update is now available through the Network or USB connections on the DTR-80.2/70.
2 Firmware Update for DTR-70.2/DTR-80.2 and DHC-80.2 There are the following methods to update the firmware: via network an d via USB storage. Please choose either one that suits your condition. Befo re you start, carefully read the update procedure. It will take about 3 0 minutes to update the firmware.
3 Updating the Firmware via Network DTR-70.2, DTR-80 .2 and DHC-80.2 a llow you to update firmware using ne twork connection o n rear panel. * In this procedure, on-screen display may vary depending on the model.
4 Update procedure 1 Press RECEIVER followed by SETUP on the remote controller. Main menu wi ll be displ ayed on T V screen. Procedures thereafter can also be p erformed on the AV receiver/controller by using its SETUP , arrow, and ENTER buttons. 2 Go to “ Hardware Setup” menu.
5 Troubleshooting Case1: If “ No Update ” is displaye d on the front displ ay of the A V receiver/controller, the firmware has already been updated. You do not need to do anything fu rther. Case2: If an erro r occurs, “ Err or!! *-** No media ” is dis played o n the front display of the AV receiver/con troller.
6 Updating the Firmware via USB DTR-70.2, DTR-80 .2 and DHC-80.2 allow you to update firmware using a USB storage device. * In this procedure, on-screen display may vary depending on the model. • Make sure the AV receiver/controller and TV are turned on.
7 Update procedure 1 Connect a USB storage devi ce to your PC. If there is any data in the USB storage device, remove it. 2 Download the firmware file from the Integra web si te. The file name is as follows: ONKAVR0003_*******.zip Unzip the downloaded file.
8 12 Message “Com plete!” appears on the front display of the AV receiver/controller, indicating that the update has been completed. 13 Using ON/STANDBY on th e front panel, turn off the AV receiver/controller and then remove the USB storage device.
9 Troubleshooting Case1: If “ No Update ” is displayed on the front display of the AV receiver/controller, the firmware has already been updated. You do not need to do anything further. Case2: If an error occurs, “ Error!! *-** No media ” is displayed on the front display of the AV receiver/controller.
10.
An important point after buying a device Integra DHC-80.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Integra DHC-80.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Integra DHC-80.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Integra DHC-80.2 you will learn all the available features of the product, as well as information on its operation. The information that you get Integra DHC-80.2 will certainly help you make a decision on the purchase.
If you already are a holder of Integra DHC-80.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Integra DHC-80.2.
However, one of the most important roles played by the user manual is to help in solving problems with Integra DHC-80.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Integra DHC-80.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
