Instruction/ maintenance manual of the product ADM-2.1 Integra
Go to page of 8
Contents Thank you for purchasing the Integra 2 Channel Amplifier. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new 2 Channel Amplifier.
2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 1. Warranty Claim You can find the serial number on the rear panel of this unit. In case of warranty claim, please report this number. 2. Recording Copyright Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder.
4 Rear panel facilities and connections GND Use this GND terminal for connecting the ground (or earth) wire of other component if humming noise is heard. AUDIO IN/OUT These are the analog audio inputs and outputs. Use an RCA-type audio connection cable to connect the output jacks of the device to the AUDIO IN jacks on the ADM-2.
5 GND AC INLET L R IN 12 V TRIGGER OFF AUDIO MIN MAX OUT IN L L R R SPEAKERS L R AUDIO 12 V TRIGGER INPUT LEVEL TRIGGER CAUTION: SPEAKER IMPEDANCE 6 OHMS MIN.
6 Fr ont panel facilities and connections Power After plugging in the power cord into the rear panel and wall outlet, pressing this switch connects the ADM-2.1 to the AC mains. The function of this switch differs depending on the setting of the TRIGGER switch on the rear panel.
7 Operations To listen to music or view your favorite movies, follow the operations below. The procedures given below assume that the other system components are already connected. (For example, that the source components are already connected to the control amplifier or the preamplifier.
W0008-1 E SN 29343005 Integra Division of ONKYO U.S.A. CORPORATION 200 Williams Drive, Ramsey, N.J. 07446, U.S.A. Tel: 201-825-7950 Fax: 201-825-8150 E-mail: integra@onkyousa.
An important point after buying a device Integra ADM-2.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Integra ADM-2.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Integra ADM-2.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Integra ADM-2.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Integra ADM-2.1 will certainly help you make a decision on the purchase.
If you already are a holder of Integra ADM-2.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Integra ADM-2.1.
However, one of the most important roles played by the user manual is to help in solving problems with Integra ADM-2.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Integra ADM-2.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
