Instruction/ maintenance manual of the product SB100 InStep
Go to page of 6
1 Keep this manual for future reference. If you sell or give this stroller away , make sure you give this manual to the new owner . Ask them to read instructions completely . STR OLLER/FRAME CARRIER SB100 Operating Instructions Important: Read and follow these Safety Rules and Assembly Instructions before operating stroller/frame carrier .
2 IMPOR T ANT We appreciate your purchase of one of our many fine products. W e are sure that you will be satisfied with your selection. We regret that although great care and ef fort have been taken, occasionally problems may occur . PLEASE DO NOT RETURN PRODUCT TO THE STORE.
3 Step 2. Rear Wheel Axle Assembl y T ip stroller so the belly bar is on the ground and the rear legs are up. Hold the axle with the brake levers up. Align the wheel brackets with the legs and push on wheel bracket until they lock into place on both sides (Picture D).
4 Use Instructions T o close str oller: While pushing in the handle buttons, grasp the handle tubes and push the handle in. The stroller will fold as handle is pushed in (Picture I) T o open stroller: Push in the handle buttons located on each side of the stroller .
5 T o con vert stroller to a frame carrier W ARNING: Please request the help of another adult to help you put the frame carrier on. 1. With rear wheels locked, release the Frame carrier waist strap cover located between the front legs (Picture M). 2. Push the lever up on the front wheels to lock them from swiveling.
6 Care and Maintenance Chec k fasteners After one hour of use, check all fasteners to make sure they are secure. Adjust if necessary . Periodically check the stroller to ensure that it is in good operating condition. T o clean seat: If cleaning is required, use a soft cloth with warm water and mild soap; air dry .
An important point after buying a device InStep SB100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought InStep SB100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data InStep SB100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, InStep SB100 you will learn all the available features of the product, as well as information on its operation. The information that you get InStep SB100 will certainly help you make a decision on the purchase.
If you already are a holder of InStep SB100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime InStep SB100.
However, one of the most important roles played by the user manual is to help in solving problems with InStep SB100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device InStep SB100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
