Instruction/ maintenance manual of the product AS-101K InSinkErator
Go to page of 12
AquaSaver ® DISPOSER CONTROL CENTER Installation Manual Model AS-101K Please be certain that the person who installs or uses this appliance carefully r eads and understands the Safety Instructions contained in this manual. The Danger signal indicates an immediately hazardous situation which, if not avoided, will result in death or serious injury .
2 T able of Contents Introduction/Featur es Introduction ..................................................................................... 3 Features .......................................................................................... 3 Mounting The Control Center/Plumbing Connections Mounting the Control Center .
3 NOTE: When the disposer is first turned on, both solenoids will operate. After the set time has expired, the flow to the disposer will slow to one gallon per minute if there is not food waste present in the grinding chamber .
4 Mounting the Control Center/Plumbing Connections MOUNTING THE CONTROL CENTER Use the flanges at the back of the control center enclosure and only mount panel in the upright vertical position (door hinge is on the left). See Figure 1. Locate control center within sight of disposer per local codes.
5 24V Water Solenoid 1 GPM Flow Control 24V Water Solenoid 7 GPM Flow Control 2 3 4 6 7 7 13 Disposer 14 M1/M3 M4/M6 M2 M5 M7 NC NC 1 3 2 L1 L2 L1 L2 On Off Neutral Hot Pre-wired in panel to contactors Power Supply Motor Leads Panel Ground Lug Control Center Connection To Power Supply 4 6 5 7 Figure 3.
6 PERSONAL INJURY • Allow only trained personnel to operate disposer . • Use baffles and guarding to avoid splashing and ejection of materials. • Do not put fingers or hands into the disposer . • When attempting to remove objects fr om a disposer , use long-handled tongs or pliers.
7 Figure 9. OPERA TING INSTRUCTIONS TO ST AR T 1. Check to ensure disposer is fr ee of foreign objects. 2. Ensure power is on. 3. Push start button. Disposer motor will run and water will flow into the disposer . 4. W ater flow will decrease to 1 GPM appr oximately 30 seconds after intitial start-up if no load is present in disposer .
8 This control center was inspected and tested under operating conditions before shipment fr om the factory . In case of trouble, check the items listed below . A. Disposer motor will not start and water does not flow . 1. No incoming line power , turn line power on.
9 120 V 1-phase 1/2 to 2 HP (FNA2) 2 3 4 6 7 M1 M3 M2 M4 M6 4 M1 M4 6 11 9 4 L1 L2 9 7 7 11 12 13 2 4 4 L1 L2 INCOMING POWER P ANEL GROUND LUG GROUND 6 6 6 3 7 L1 L2 4 4 2 10 7 STOP ST ART 12 10 X2 24.
10 AS-101K-2 Wiring Diagram 208/230 V 1-phase 1/2 to 2 HP (FNA2) 2 3 4 6 7 M3 M4 4 M1 M4 6 11 9 4 L1 L2 9 7 7 11 12 13 2 4 4 L1 L2 INCOMING POWER GROUND 6 6 6 3 7 L1 L2 4 4 2 10 7 STOP ST ART 12 10 X2.
11 208/230 V 3-phase 1/2 to 10 HP (FNA2) 4 24V W A TER SOLENOID V AL VE MOUNT IN LINE 7 GPM FLOW CONTROL L2 L2 M3 M2 M1 TRIP POINT TRIP DELA Y 14 7 7 4 5 4 3 2 1 AC CURRENT SENSOR OFF ON H4 H2 H3 H1 X.
12 AS-101K-4 Wiring Diagram 380/460 V 3-phase 1/2 to 10 HP (FNA2) 24V W A TER SOLENOID V AL VE MOUNT IN LINE FLOW CONTROL L2 L2 M3 M2 M1 TRIP POINT TRIP DELA Y 14 7 7 4 5 4 3 2 1 AC CURRENT SENSOR H4 .
An important point after buying a device InSinkErator AS-101K (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought InSinkErator AS-101K yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data InSinkErator AS-101K - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, InSinkErator AS-101K you will learn all the available features of the product, as well as information on its operation. The information that you get InSinkErator AS-101K will certainly help you make a decision on the purchase.
If you already are a holder of InSinkErator AS-101K, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime InSinkErator AS-101K.
However, one of the most important roles played by the user manual is to help in solving problems with InSinkErator AS-101K. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device InSinkErator AS-101K along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
