Instruction/ maintenance manual of the product NS-DXA2 Insignia
Go to page of 2
Connecting your converter box 1 Connect your existing antenna cable to the RF IN jack on the converter box. You may need to remove the antenna cable from the back of your TV and connect it to the converter box. Note : An antenna connection is mandatory.
V2 ENGLISH 13-0502 Setting up your converter box 1 Turn on your TV and converter box. 2 Tune to the correct source. • If you connected using AV cables, select the video input (AV, Video 1, etc.) on your TV. • If you connected using coaxial cables, tune your TV to channel 3.
An important point after buying a device Insignia NS-DXA2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Insignia NS-DXA2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Insignia NS-DXA2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Insignia NS-DXA2 you will learn all the available features of the product, as well as information on its operation. The information that you get Insignia NS-DXA2 will certainly help you make a decision on the purchase.
If you already are a holder of Insignia NS-DXA2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Insignia NS-DXA2.
However, one of the most important roles played by the user manual is to help in solving problems with Insignia NS-DXA2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Insignia NS-DXA2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center