Instruction/ maintenance manual of the product Washer/Dryer Inglis
Go to page of 7
I Installation Instructions 1 Laundry System WushereDryer - 240 Volt IMPORTANT: Read and save these instructions. IMPORTANT: Installer: Leave Installation Instructions with the homeowner. Homeowner: Keep Installation instructions for future reference.
Before you start... Check locatlon where washer/dryer will be installed. Proper installation is your responsibility. The washer/dryer must not be installed or stored in an area where it will be exposed to water and/or weather. Make sure you have everything necessary for correct installation.
Exhaust reauirements Now start... With washer/dryer in laundry area. NUMBER OF 90” TURNS 10.2 cm (4 in) 13.1 m (43 ft) 10.1 m (33 ft) 7.0 m (23 ft) Fire Hazard l Do Not use non-metal, flexible duct. l Do Not use metal duct smaller than 10.2 cm (4 In) In diameter.
Numbers correspond Floor Damage Slide dryer onto cardboard or hardboard More movlng across floor. Failure to do so may cause damage to tloor coverlng. to steps. 8. 6 H Now stand the washer/dryer up. Slide washer/dryer onto cardboard or hardboard. To prevent product damage, do not remove corner posts betore cutting.
23. 22. Numbers correspond to steps. 20. 16 n Open hose clamp and slide over “hook” end of drain hose to secure the rigid and corrugated sections together. Tilt the washer/dryer forward - raising back legs 2.5 cm (1 in) off the floor to let the rear self-leveling legs adjust.
Product dimensions Recessed and closet nstallatlon :nstructions Rear view & 24” + 4 Fire Hazard l It Is recommended that the washer/dryer be exhausted to the outslde. l If washer/dryer Is Installed In a closet, the dryer MUST be exhausted outslde.
If washer/dryer does not operate... l Check that the circuit breaker is not tripped or the house fuse blown. l Check that power supply cord is plugged into wall receptacle. Printed on recycled paper. 10% post consumer waste/ 50% recovered materials. Part No.
An important point after buying a device Inglis Washer/Dryer (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Inglis Washer/Dryer yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Inglis Washer/Dryer - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Inglis Washer/Dryer you will learn all the available features of the product, as well as information on its operation. The information that you get Inglis Washer/Dryer will certainly help you make a decision on the purchase.
If you already are a holder of Inglis Washer/Dryer, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Inglis Washer/Dryer.
However, one of the most important roles played by the user manual is to help in solving problems with Inglis Washer/Dryer. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Inglis Washer/Dryer along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
