Instruction/ maintenance manual of the product SLB150 Ingersoll-Rand
Go to page of 20
Form MHD56109 P AR TS, OPERA TION AND MAINTENANCE MANU AL fo r LEVER CHAIN HOIST MODELS Form MHD56109 Edition 9 Ju ly 2013 71480545 © 2013 Ingersoll-Rand WARNING Do not use this hoist f or lifti ng, suppor ting, or tr ansporting people or li fting or supporting loads over people.
2 MHD56109 - Edition 9 SAFETY INFORMA TION This manual provides important information for all personnel involved with the safe inst allation, opera tion and proper maintenance of this product. Ev en if you feel you are familiar with this or simila r equipment, you shoul d read this manual before operating the product.
MHD56109 - Edition 9 3 SAFE OPERA TING INSTRUCTIONS The following warnings and oper ating instructions have been adapted in part from American National Standard ASME B30.21 and are intended to avoid u nsafe operating practices which might lead to injury or property damage.
4 MHD56109 - Edition 9 INST ALLA TION Prior to inst alling hoist, ca refully inspect it for possible shipping damage. Hoists are supplied full y lubricated from the factory .
MHD56109 - Edition 9 5 CAUTION • Ensure load is properly seat ed in saddle of bottom hook. In NEUTRAL “N” position hand lever does not engage ratchet gear . The hand lever free-wheels until s elector lever is shifted to UP or DOWN position. 1. Set selector lever to NEUTRAL (center) position.
6 MHD56109 - Edition 9 INSPECTION WARNING • All new , altered or modified equipment should be inspe cted and tested by personnel trained in safety , operation and maintenance of this equipment to ensure safe operation at rated specificati ons before placing equipment in servic e.
MHD56109 - Edition 9 7 4. CHAIN. Refer to Dwg. MHP0102 on page 7. Examine each link for bending, cracks in weld areas or shoulders, transverse nicks and gouges, weld splatter , corrosion pits, striation (minute parallel lin es) and chain wear , including bearing surfaces between chai n links.
8 MHD56109 - Edition 9 LUBRICA TION General Thread lubricant or an anti-seize compound use is recommended for threaded shaft s, capscrews a nd nuts. Unless otherwise stated, remove old lubricant, clean part with an acid free solvent and apply a new coating of lubricant to part before assembly .
MHD56109 - Edition 9 9 MAINTENANCE WARNING • Never perform maintenance on hoist while it is supporting a load. • Before performing ma intena nce, tag hoist: W ARNING - DO NOT OPERA TE - EQUIPMENT BEING REP AIRED. • Only allow personnel trained in the operation and service of this product to perform maintenance.
10 MHD56109 - Edition 9 5. Remove change over pawl (22), spring shaft (23) and change over spring (24) from lever handle assembly (25). 6. Carefully pry change hand wheel (28) from change over gear (20). 7. Remove screw (64), washers (6 5) and prevailing torque type nut (60) from threaded spacers (94).
MHD56109 - Edition 9 11 Brake End Assembly Follow steps 1 through 6 describe d in ‘Load Sheave Assembly’ and steps 1 through 5 describe d in ‘Gear End Assembly’. CAUTION • The brake will not operate pr oper ly if there is oil or gr ease on brake friction disk (17).
12 MHD56109 - Edition 9 HOIST ASSEMBL Y P ARTS DRA WING (Dwg. MHP0773) 45 48 46 47 76 67 32 60 1 3 93 2 62 4 5 6 7 8 12 13 14 63 17 19 60 20 25 65 64 28 68 69 70 71 29 30 67 27 26 66 44 22 23 24 21 65.
MHD56109 - Edition 9 13 HOIST ASSEMBL Y P AR TS LIST No. Description 0. 75t 1t 1.5t 3t 6t 1 Gear case assembly 45590098 45590445 45590999 45590262 45590650 2 Driver shaft assembly (incl udes item 3) 4.
14 MHD56109 - Edition 9 Bottom hook kit (includes items 46, 47, 51, 52, 75, 76, 77) 45471257 45471265 45471281 45471315 45471323 51 Bottom hook 45590155 45590569 45591054 45590320 45590718 52 Chain pi.
MHD56109 - Edition 9 15 P AR TS ORDERING INFORMA TION The use of other than genuine Ingersoll Rand replacement parts may adversely affect safe operati on of this product. For prompt service and genuine Ingersoll Rand parts, provide your near est distributor with the following: 1.
16 MHD56109 - Edition 9 NOTES Declaration Of Conformity 71480545 Form: MHD56109 E dition 9 J uly, 2013 (FR) CERTIFIC AT DE CONFORMITÉ (DE) K ONFORMITÄTSERKLÄRUNG (IT) DICHIARAZIONE DI CONFORMITÀ (.
MHD56109 - Edition 9 17 NOTES.
18 MHD56109 - Edition 9 NOTES.
MHD56109 - Edition 9 19 W ARRANT Y HOIST LIMITED W ARRANTY Ingersoll Rand Company warrants to the original use r its Hoists and W i nches (Products) to be free of defect s in material and workmanship for a period of one ye ar from the date of purchase.
Printed in China ingersollrand product s.com © 2013 Ingersoll-Rand.
An important point after buying a device Ingersoll-Rand SLB150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ingersoll-Rand SLB150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ingersoll-Rand SLB150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ingersoll-Rand SLB150 you will learn all the available features of the product, as well as information on its operation. The information that you get Ingersoll-Rand SLB150 will certainly help you make a decision on the purchase.
If you already are a holder of Ingersoll-Rand SLB150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ingersoll-Rand SLB150.
However, one of the most important roles played by the user manual is to help in solving problems with Ingersoll-Rand SLB150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ingersoll-Rand SLB150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
