Instruction/ maintenance manual of the product 49999-521 Ingersoll-Rand
Go to page of 4
ARO® OPERATOR’S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE Part No. 49999-521 September 1998 64661088 8463 Power Motor (1500 R.P.M.) WARNING READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT. FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY. WARNING Wear eye protection when operating or performing maintenance on this tool. WARNING 1 Turn off air supply and disconnect air supply hose before installing, removing or adjusting any accessory on this tool, or before performing any maintenance on this tool.
ROUTINE LUBRICATION REQUIREMENTS Lack of or an excessive amount of lubrication will affect the perfor- mance and life of this tool. Use only recommended lubricants at below time intervals: EVERY 8 HOURS OF TOOL OPERATION - Fill lubricator reser- voir of recommended F.
8463 20 Series (1500 R.P.M.) TPM_1031.
An important point after buying a device Ingersoll-Rand 49999-521 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ingersoll-Rand 49999-521 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ingersoll-Rand 49999-521 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ingersoll-Rand 49999-521 you will learn all the available features of the product, as well as information on its operation. The information that you get Ingersoll-Rand 49999-521 will certainly help you make a decision on the purchase.
If you already are a holder of Ingersoll-Rand 49999-521, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ingersoll-Rand 49999-521.
However, one of the most important roles played by the user manual is to help in solving problems with Ingersoll-Rand 49999-521. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ingersoll-Rand 49999-521 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center