
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communi- cations. Operation of this equipment in a residential area is likely to cause harm- ful interference in which case the user will be required to correct the interference at his own expense.
Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Can- ada.
Safety Certifications UL, CUL, TÜV, NOM, IRAM
EN 55022 Warning This is a Class A product. In a domestic environment it may cause radio interfer- ence, in which case the user may be required to take adequate measures. The typ- ical use is in a conference room, meeting room or auditorium.
Remote Control Warning Laser radiation class II product; wavelength 670nm; maximum output 1mW. Remote control complies with applicable requirements of 21 CFR 1040.10 and 1040.11. Remote control complies with applicable requirements of EN 60 825-1: 1994 +A11.


Declaration of Conformity Manufacturer: InFocus 27700B SW Parkway Ave. Wilsonville, Oregon 97070 USA European Office: Olympia 1, NL-1213 NS Hilversum, The Netherlands
We declare under our sole responsibility that the LP930 projector conforms to the following directives and norms:
Directive 89/336/EEC, Amended by 93/68/EEC EMI: EN 55022 (1992) Class A EMC: EN 55022 EN 55024
EN 61000-3-2 EN 61000-3-3 Directive 73/23/EEC, Amended by 93/68/EEC Safety: EN 60950: 1992 + A1 + A2 + A3 + A4: 1997
Australian Certification C-tick mark
Trademarks Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of Microsoft Corporation. InFocus, CableWizard, and LP are trademarks or registered trademarks of InFocus.
November, 2000



Safety Instructions iii
Introduction 1 Image Resolution 1 Compatibility 1 Unpacking the Projector 1 Usage Guidelines 3 If You Need Assistance 4 Warranty 4
Setting up the Projector 5 Connecting a Computer Using a VESA Cable 11 Connecting a USB type B mouse 11 Connecting a Computer using BNC Cables 11 Connecting a Computer with an M1-DA Cable 12 Connecting a Computer with an RS-232 Cable 12 Connecting a Video Player 13 Connecting a Video Player using BNC Cables 14 Connecting External Speakers 15 Connecting the Remote Control Cable 15 Powering up the Projector and Adjusting the Image 16 Turning Off the Projector 17
Using the Projector 19 Basic Image Adjustment 19 Adjusting the Projector 20 Using the Remote Control 22 Using the Keypad and Remote Buttons 24 Using the On-Screen Menus 27 Display Menu 28 Audio Menu 30 Image Menu 32 Controls Menu 35 Language Menu 38 Status Menu 38

T a b l e o f C o n t e n t s
Maintenance & Troubleshooting 41 Cleaning the Lens 41 Replacing the Projection Lamp 41 Replacing the Batteries in the Remote Control 44 Using the Security Lock 44 Troubleshooting 45
Appendix 49 Specifications 49 Accessories 50 Portable and Laptop Activation Chart 52 Using Video Mirroring with a PowerBook Computer 57 Projected Image Sizes 58 RS232 Terminal Specifications 59

Please read and follow all safety instructions provided BEFORE using your new projector. Failure to comply with safety instruc- tions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by equipment. Please save all safety instructions.
Safety Definitions: • Warning: Statements identify conditions or practices that could result in personal injury.
Safety Symbols:
An arrow pointing to the lamp door on the projector.
Safety Terms: • Warning: Don’t look directly into the lens when the lamp is turned on.

S a f e t y I n s t r u c t i o n s
Do not place objects in this area behind the projector
2 ft (.6m)

Customer Service If you need assistance, call InFocus Customer Service directly at 1-800-799-9911. Support is free between 6 a.m. and 6 p.m. PST, Monday through Friday. Support is available in North America after hours and weekends for a fee at 1-888-592-6800.
Or, send us an e-mail at techsupport@infocus.com.
In Europe, call InFocus in The Netherlands at (31) 35-6474010.
In Asia, call InFocus in Singapore at (65) 332-0659.

S a f e t y I n s t r u c t i o n s

The InFocus® LP930™ XGA multimedia projector is specifically designed for fixed installations. The projector features an M1-DA connector for easy, built-in digital/analog and USB connectivity. It allows four computer, three video, and three audio inputs, one audio output, and RS-232 control.
The native resolution of the 930’s projected image is XGA 1024x768. Screen resolutions between 1024x768 and 1280x1024 are compressed to 1024x768. The projector cannot compress screen resolutions above 1280x1024. If your computer’s screen resolution is higher than 1280x1024, reset it to a lower resolution before you connect the projector.
expands 640x480 and 800x600
images to 1024x768. You can dis-
play these images at their native
resolutions by turning off the Auto
Resize feature. See “Resize” on
page 32 for more information.
The projector is compatible with a wide variety of computers and video devices, including:
ble with 1080i HDTV format.
The projector comes with the items shown in Figure 1. Check to make sure all are included. Contact your InFocus dealer imme- diately if anything is missing. User’s Guides are also available for download from our website at www.infocus.com
ble with many third-party control-
lers and amplifiers, including
A registration card is included in the box. Register to receive product updates, announcements, and special offers from InFocus. Or, register online at www.infocus.com/service/register and you will be automatically entered to win free merchandise.
AMX, Crestron, and Extron. Call
your dealer for details.

I n t r o d u c t i o n

angle zoom, and ultra wide angle
lenses are also available. See
page 50 for details.
Shipping box contents

Side view of projector

I n t r o d u c t i o n
The first place to look for help is in this manual. Be sure to check the guidelines in “Troubleshooting” on page 45. Or, check the Service and Support section of our website at http://www.infocus.com/service You’ll find a Technical Library, FAQs, and support contacts including a technical support e-mail form.
If those sources don’t answer your question, call your InFocus dealer. You can also call InFocus Customer Service directly at 1-800-799-9911. Call between 6 a.m. and 6 p.m. PST, Monday through Friday. Service is available in North America after hours and on weekends for a fee at 1-888-592-6800.
In Europe, call InFocus in The Netherlands at (31) 35-6474010. In Asia, call InFocus in Singapore at (65) 332-0659.
Or, send us an e-mail at techsupport@infocus.com
Our World Wide Web address is http://www.infocus.com.
This product is backed by a limited two-year warranty. The details of the warranty are printed at the back of this manual. A longer term warranty can be purchased from your InFocus dealer. Refer to page 50 for the part number.

1 Place the projector on a flat surface.
2 Position the projector the desired distance from the screen.
The formulas for distance to the screen are:
Max distance (ft) = diagonal image size (ft) ÷.49 Min distance (ft) = diagonal image size (ft) ÷.69
optional short throw and long
throw lenses, see page 58 of the
Appendix.
(feet) 300 240 51 36 240 192 41 29 180 144 31 22 144 115 24 17 120 96 20 14 96 77 16 12 72 58 12 9 60 48 10 7 48 38 8 6

S e t t i n g u p t h e P r o j e c t o r
zoom adjustment range:
G
B
A 0 A 0
L L In out In In L BNC BNC R R R
B
R
Projected image size for 10’ diagonal image size
The projector is equipped with a lens shift feature that allows you to adjust the projection height (move the image along the wall) without moving the projector, while still maintaining a perfectly square image. Turn the lens shift knob on the side of the projector to make this adjustment (Figure 4).
Adjusting the lens shift
20-14’ · s R

The bottom of the image can move from half way below the pro- jector’s lens (Figure 5) to parallel with the lens (Figure 6).
Example: With a 10’ image, at the lowest projection angle, the bot- tom of the image is 5’ below the projector’s lens; at the highest projection angle, the bottom of the image is parallel with the lens.
B 10’ high image
L L In out In In L BNC BNC R R R
A 0 A 0
G
B
R
H
bottom of image 5’ below lens
Lowest image projection angle
bottom of image parallel with lens
B
A 0 A 0
L L In out In In L BNC BNC R R R
B
R
Highest image projection angle
Once you know the diagonal image size, you can figure out the width and height using these formulas:
width (inches) = diagonal (inches) x 0.8 height (inches) = width (inches) x 0.75

S e t t i n g u p t h e P r o j e c t o r
The following tables give the lens shift values for desktop and ceiling-mounted setups for various image sizes. The lower lens shift position represents the highest the projector can be above the bottom of the screen; the upper lens shift position represents the lowest the projector can be below the bottom of the screen.
Distance from lens center to
lower edge of screen (H)
Lower lens shift position
Upper lens shift position
(inches) 300 90 0 240 72 0 180 54 0 144 43 0 120 36 0 96 29 0 72 22 0 60 18 0 48 14 0
When the projector is ceiling mounted, use the upper edge of the screen as the base line.
Distance from lens center to
upper edge of screen (H)
Lower lens shift position
Upper lens shift position
(inches) 300 90 0 240 72 0 180 54 0 144 43 0 120 36 0 96 29 0 72 22 0 60 18 0 48 14 0

high edge of screen
Lens shift with ceiling-mounted projector
3 Make sure the projector is unplugged and your computer is turned off.
Now you’re ready to connect your equipment.
Steps for connecting the different types of equipment are given on the pages listed below.
tor is used with the optional
Equipment you want to connect Page
CableWizard2 or 3, a connection
Computer with VESA cable page 11
hub containing mouse, audio,
USB type B mouse page 11
monitor and computer connectors.
It is optimized for ceiling-mounted
Computer with BNC cables page 11
Computer with M1-DA cable page 12
installations, and can be used with
RS-232 cable page 12
a 60’ extension cable. See
Video player page 13
page 50. This input is designated
External speaker page 15
Computer CableWizard.
Remote cable page 15
lens center · lens center · “Optional Accessories” on

S e t t i n g u p t h e P r o j e c t o r
Computer RGBHV 5 BNCs VESA
VESA M1-DA CableWizard Video S-Video USB
G
B
L L In out In In L
R R R Cb
H V
Audio 3 Audio 1 Audio 2
The projector has the following audio/video inputs:
is turned off before connecting
3 Single-ended analog RGB + 2 H&V sync (5 BNCs)
Left and right line-level (2 RCAs)
equipment.
VESA Single-ended analog RGB (HD-15)
Left and right line-level (2 RCAs)
M1-DA Single-ended ana- log or digital
Left and right line-level (2 RCAs)
CableWizard Analog RGB Combined with CableWizard
Base-band component video (BNC)
Left and right line-level (2 RCAs)
Base-band composite video (RCA)
Left and right line-level (2 RCAs)
S-Video S-video Y/C (4-pin circular) Left and right line-level (2 RCAs)

This input is designated Computer VESA.
1 Plug one end of the supplied VESA cable into the video con- nector on your computer. Plug the other end into the VESA connector on the projector.
older Macintosh computer that
2 If you want audio with your presentation, plug an audio cable (not supplied) into the audio connector on your computer.
has a 2-row 15-pin connector, you
must use a Mac adaptor between
Plug the other end into a In connector on the projector.
the computer and the projector.
See “Optional Accessories” on
page 50.
B
A 0 A 0
L L In out In In L BNC BNC R R R
B
R
Connecting the projector to a computer using a VESA cable
You can control the computer’s mouse with the projector’s key- pad or remote by connecting a USB mouse cable to the USB con- nector on the projector (Figure 8 on page 10) and on your computer. This feature is available for PC Computer RGBHV and VESA sources only. It is not supported on the Macintosh plat- form. See page 37 for menu options that apply to a USB type B mouse.
nected, the projector handles sepa-
rate synch on H and V. When 4
BNCs are connected, the projector
handles a composite sync on H.
When 3 BNCs are connected, the
projector handles a composite sync
on G.
Connect the BNC cables to the appropriate RGBHV connectors on the projector (Figure 8 on page 10) and on your computer.
This input is designated Computer RGBHV.
s R · VESA cable

S e t t i n g u p t h e P r o j e c t o r
See “Optional Accessories” on page 50 to order this cable. This input is designated Computer M1 Analog or Computer M1 Digital.
1 Plug the end of the M1-DA computer cable into the M1-DA connector on the projector.
2 Plug the end of the M1-DA computer cable into the video connector on your computer.
do not automatically turn on their

external video port when a
secondary display device such as a
L L In out In In L BNC BNC R R R
projector is connected. Refer to
your computer manual for the
command that activates the
external video port. Activation
commands for some laptop
computers are listed in the
manual on page 52.
Connecting the projector to a computer using the M1-DA cable
Do you want to control the computer’s mouse from the projector’s remote or keypad?
1 Plug the end of the M1-DA computer cable into a USB mouse connector on your computer.
supported for use with
Do you want to play your computer’s audio on the projector?
Windows 98, Windows 2000, and
1 Plug an audio cable (not supplied) into the audio connector on your computer.
Apple OS 8.5 and higher only.
2 Plug the other end of the audio cable into a In connector on the projector.
your computer after connecting a
USB mouse to use it (it is hot-
You can control the projector from an LCD control panel by con- necting an RS-232 cable to the projector (see Figure 8 on page 10). See “RS232 Terminal Specifications” on page 59 for details.
pluggable).
Appendix of this

1 If your video player uses a round, one-prong composite video connector, you’ll need only the A/V cable that shipped with the projector.
2 Plug the A/V cable’s yellow connector into the “video-out” connector on your video player (Figure 11). This connector may be labeled “To Monitor.”
nected to the projector using the
computer inputs, not the video
inputs. All analog computer inputs
3 Plug the other yellow connector into the composite video con- nector on the projector.
can display HDTV. See the previ-
ous pages for computer connection
instructions.
B
A 0 A 0
L L In out In In L BNC BNC R R R
B
R
Connecting the projector to a video player using the standard A/V cable
s R · A/V cable

S e t t i n g u p t h e P r o j e c t o r
G
B
L L In out In In L BNC BNC R R R
B
R
Connecting the projector to a video player using an S-video cable and the A/V cable
4 Plug the A/V cable’s white connector into the left “audio out” connector on your video player. Plug the cable’s red connector into the right “audio out” connector on the video player (Fig- ure 11 and Figure 12).
5 Plug the A/V cable’s other white and red connectors to the
left and right In ports on the projector.
The projector is compatible with these major broadcast video standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and SECAM. It automatically adjusts to optimize its performance for the incoming video. The input signal for SECAM video is similar to other video signals and cannot be automatically detected, therefore SECAM must be chosen manually. See “Video Stan- dard” on page 35 for details.
may also have a “Video Out”
connector for a coaxial cable
connection. DO NOT use this to
connect to the projector.
Connect the BNC cables and audio cables to the appropriate con- nectors on the projector (Figure 8 on page 10) and on your video player.
This input is designated Component Video.
s R · S-video cable · A/V cable

To connect one or two external speakers, plug the speaker cable
into the out (audio out) connectors on the projector. The external speaker’s volume is controlled by the projector; see “Vol- ume + or -” on page 26.

L L In out In In L BNC BNC R R R
If the projector cannot receive the remote’s signal, as may be the case if you’re using rear projection, connect the remote directly to the projector with the optional remote cable. See “Optional Accessories” on page 50.
1 Plug the remote cable into the wired remote connector on the projector.
2 Plug the other end into the connector on the remote.
using the remote, see page 22.

L L In out In In L BNC BNC R R R
Connecting the remote control cable
Connecting external speakers

S e t t i n g u p t h e P r o j e c t o r
1 Remove the lens cap.
2 Plug the power cord into the side of the projector, then plug it into your electrical outlet. A surge-protected power strip is recommended.
that shipped with the projector.
3 Press the power button.
your computer to the projector, the
computer may display a message
4 If you connected a video player, turn it on.
stating that new hardware was
found. The Add New Hardware
Wizard may appear. Use the
Wizard to load the correct driver
(the computer considers the
projector a Plug and Play Monitor).
5 Turn on your computer.
the order in which you power up
the equipment is very important.
Most computers should be turned
on last, after all other peripherals
have been turned on. Refer to your
determine the correct order.
computer’s documentation to

If you want to blank the screen for a short period of time, press the standby button on the keypad or remote. This blanks the screen for fifteen minutes, but keeps the projector running. (You can change the amount of time the projector stays in standby mode; see “Standby Time” on page 35 for details.) After the standby time, the projector shuts off. To exit standby mode, press the standby button again.
To completely power off the projector, press the Power button. The lamp turns off and the LED blinks orange while the fans con- tinue to run to cool the projector. After the projector is cooled, the projector turns off and the LED lights solid green.
if you turn the projector off, then
wait 1 minute while the lamp cools
before unplugging the projector.

S e t t i n g u p t h e P r o j e c t o r

This section describes how to use and make adjustments to the projector. It also provides a reference to the keypad and remote buttons and the options available from the on-screen menus.
1 Make sure you have powered up your equipment in the right order (page 16).
2 If the image doesn’t display completely, zoom the image (page 20), adjust the height of the projector (page 20) or center the image by adjusting its horizontal or vertical position (page 34). Be sure the projector is at a 90 degree angle to the screen.
3 If the image is out of focus, rotate the focus lens (page 20).
4 If the image appears to shimmer or if it has blurry vertical bars after you have adjusted the focus, turn Auto Image (page 32) off and then back on to reset the automatic sync and tracking. If that doesn’t clear up the image, turn Auto Image off and adjust the sync (page 33) and/or the tracking (page 33) manually.
5 If the colors don’t look right, adjust the brightness (page 28).

U s i n g t h e P r o j e c t o r
To focus the image, rotate the focus ring (Figure 15) until the image is clear. To zoom the image, rotate the zoom ring. This adjusts the image size without affecting focus.
Focus ring and zoom ring
The projector is equipped with a projection angle lens shift knob that provides adjustment from horizontal. This allows you to adjust the projection height without moving the projector (see page 8 for lens shift values). It also has a height-adjustment foot, an elevator button, and a leveling knob.
Adjusting the lens shift
zoom ring · focus ring

To adjust the height of the projector, press and hold the elevator button, raise the projector to the desired height, then release the button to lock the foot into position. Rotate the leveling knob, if necessary, to adjust the angle of the projected image.
elevator button elevator foot
Adjusting the height of the projector
B
A 0 A 0
L L In out In In L BNC BNC R R R
B
R
s R · leveling knob · Leveling knob

U s i n g t h e P r o j e c t o r
To control the computer’s mouse from the projector’s remote or keypad, you must connect either the USB connector on the M1 computer cable to the computer (see page 12) or a type B USB mouse cable to your computer and the projector (see page 11). This feature is not supported on the Macintosh platform.
remote control at the projector so
that its signal is received — for
example, when using rear
Point the remote control at the projection screen or at the top of the projector. The range for optimum operation is about 25 feet. If you point the remote at the projection screen, the distance to the screen and back to the projector must be less than or equal to 25 feet. For best results, point the remote directly at the front or the rear of the projector.
projection or in a large
auditorium— connect it directly to
the projector with the optional
remote control cable.
The projector ships with a full-feature remote (see page 24 for a description of the buttons) which includes a laser pointer. The remote has a disk mouse and two mouse buttons, one on the top of the remote and one on the bottom (Figure 19).

Remote control

Press anywhere on the edge of the disk mouse to move the cursor on the screen. You can move the cursor at any angle by pressing the corresponding edge of the disk. The mouse button on the top of the remote simulates your computer’s right mouse button; the button on the bottom simulates your computer’s left mouse but- ton. When you press the disk mouse, the remote lights up. The light goes off about 10 seconds after you stop pressing buttons.
To use the laser pointer, press and hold the laser button. The laser goes off when the button is released.
If you are creating presentations in Microsoft® PowerPoint®, you can use the remote’s mouse buttons to navigate through your presentation while in Slide Show mode. To configure PowerPoint for this, choose Options from the Tools menu, click the View Tab, de-select the “Popup Menu on Right Mouse Click” option in the Slide Show section, then click OK. Then, when you’re in Power- Point’s Slide Show mode, a left click advances to the next slide and a right click returns to the previous slide (other PowerPoint modes are not affected).
use the projector’s Controls menu
to configure the mouse for Power-
Point. See page 37 for details.

U s i n g t h e P r o j e c t o r
While the menus are displayed, the volume, source, and standby buttons on the keypad act as menu navigation buttons. See “Using the On-Screen Menus” on page 27 for details.


Keypad buttons

Brightness + or - (remote only) Adjusting the brightness lightens or darkens the image.
Freeze (remote only) The freeze button halts, or “freezes” the projected image. Use this button to freeze a frame of video (the video continues to run but the projected image is frozen). You can also freeze an image from a computer source on the screen, allowing you to perform other operations on the computer without the audience seeing them. Press freeze again when you want the image to return to normal.
Laser (remote only) The laser button activates a laser beam that can be used as a pointing device. To use the laser, press and hold the laser button. The laser goes off when the button is released.
Menu Press menu to open the on-screen menus. Press menu again to close the menus. When you close the menus, the projector saves any changes you made. For more information about the on- screen menus, see page 27.
Power The power button turns the projector on and off. When you plug the projector in, the Power LED lights. When you press the power button, the LED blinks green, then turns solid green and the lamp turns on.
When you press the power button while the projector is on, the lamp turns off and the LED blinks orange while the fans continue to run to cool the projector. After the projector is cooled, the pro- jector turns off and the LED lights solid green.

U s i n g t h e P r o j e c t o r
Standby When you press standby, the display and audio turn off and a blank screen is displayed for 15 minutes. You can change the amount of time the projector stays in standby mode; see “Standby Time” on page 35 for details. While the projector is in standby, the keypad and remote buttons do not affect the projec- tor and the LED lights orange.
Source (keypad only) or
Comp and Video (remote only) When you have more than one source (computer and video) con- nected to the projector, select between them by pressing the source button on the keypad or the comp or video button on the remote. Press comp to display your computer image. Press comp again to toggle among the computer sources. The sources switch in this order:
Press video again to toggle among the video sources. The video sources switch in this order:
Volume + or - • To increase the volume, press +.
Volume adjustments are saved for each source you have con- nected.

The projector has six drop-down menus that allow you to make image adjustments and change a variety of settings. Most of these adjustments aren’t available directly from the keypad.
To open the on-screen menus, press the menu button on the keypad or remote. This changes the volume, source, and standby buttons on the keypad to menu navigation buttons. Press the corresponding buttons to move the cursor up, down, left, or right, or use the disk mouse on the remote. To select a menu, move the cursor left or right to highlight the menu you want. The drop-down menu appears.
grayed out at certain times. This
indicates the item is not applicable
to your setup (for example, video
standards do not apply to com-
puter sources) or the item is not
Display Audio Image Controls Language Status >
enabled until another selection is
Brightness Contrast Tint Color Color temperature Sharpness Blank screen blue Reset all
made (for example, Manual Track-
ing is not available until Auto
Image is turned off).
volume - volume +
use these buttons to navigate through
Keypad navigation buttons and drop-down menu
To change a menu setting, use the up and down navigation but- tons on the keypad or the disk mouse on the remote to move the cursor up and down to the item you want to change (the selected item is highlighted), then use the left and right mouse buttons to adjust a setting. Some submenus, such as Brightness, consist of a slider bar you use to increase or decrease a value; some sub- menus, such as Standby Time, consist of options you scroll through to select the desired one. All changes are saved when you close the menus.
To access another menu, use the left and right navigation buttons to move to the desired menu.

U s i n g t h e P r o j e c t o r
Display Audio Image Controls Language Status >
Brightness Contrast Tint Color Color temperature Sharpness Blank screen blue Reset all
Brightness Adjusting the brightness changes the intensity of the image.
Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.
Tint The tint adjusts the red-green color balance in the projected image. Changing the Tint setting has no effect on PAL or SECAM video sources.
> · Display menu

Color The color setting adjusts a video image from black and white to fully saturated color.
Color Temperature The Color Temperature setting adjusts the amount of red in the projected image.
Sharpness This setting adjusts the sharpness of a video image.
Blank Screen Blank Screen determines what color is displayed when there is no active source and when the projector is in standby. Click the left or right mouse button to toggle between blue and black.
Reset All Click the left or right mouse button to reset all the options (except Language, Video Standard, Audio Source, Plug and Play, Rear Projection, Standby Time, and projection modes) in all the menus to their original settings.

U s i n g t h e P r o j e c t o r
Display Audio Image Controls Language Status >
Volume Treble Bass Balance Fade Audio source audio source 2
using the menu is the same as
Volume adjustments you make are saved for each source.
changing it using the remote or
Treble The treble setting controls the high frequencies of your audio source.
keypad.
Treble adjustments you make are saved for each source.
Bass The bass setting controls the low frequencies of your audio source.
Bass adjustments you make are saved for each source.
> · Audio menu · Volume

Balance The Balance setting controls the balance between the left and right speakers. The Balance setting applies to all sources you have connected.
Fade The Fade setting controls the balance between the internal and external speakers. The setting appears gray and won’t highlight if external speakers aren’t connected.
Audio Source Select This setting allows you to match a computer or video input to an audio input. The projector has four computer and three video inputs, but only four audio inputs.
Select among audio sources 1, 2, and 3, and CableWizard. (The CableWizard computer input does not have a separate audio input. Audio is transmitted in the CableWizard computer input.) By default, the RGBHV and M1-DA sources are assigned to audio input 1, the VESA source to audio 2, the CableWizard source to CableWizard, and all video sources to audio 3. (Figure 8 on page 10 shows the labeled audio inputs on the connector panel.) To change these assignments, make the desired source active (for example, the VESA input), then select an audio source.
nected in order to hear sound from
the projector.

U s i n g t h e P r o j e c t o r
Display Audio Image Controls Language Status >
on Image position top
Auto image on Resize on
Manual sync Manual tracking Horizontal position Vertical position Zoom
Overscan This option crops all the edges of the image to remove noise gen- erated on the edges by your source. This option is available for video sources only.
interfere with the operation of
Auto Image. If you’re experiencing
Image Position This setting allows you to re-position a 16x9 or native mode video image. Select among top, bottom, and center by highlight- ing Image Position in the menus and clicking either mouse but- ton to cycle through the options.
problems, try turning your screen
saver off, then turning Auto Image
off and back on.
Auto Image The projector automatically adjusts tracking, signal synchroniza- tion and vertical and horizontal position for most computers (Auto Image does not apply to video sources). If you want to adjust these features manually, you must turn off Auto Image first by highlighting Auto Image in the Image menu and clicking the left or right mouse button to select “off”.
Resize This option works differently for computer and video sources. For computer sources, Resize automatically resizes the image by scaling it up or down. It only affects computer images that are not the projector’s native resolution. When Resize is on, the projector makes the best fit of the image to the computer screen. If you turn Resize off (by highlighting it in the Image menu and clicking the left or right mouse button to select “off”), the image may be either cropped or too small for the screen.
HDTV source, the projector
automatically displays the image in
16x9 format.
> · Overscan · Image menu

For video sources, Resize allows you to select from among four different re-sizing options. The default is Standard, which resizes the image from its original version to fit a standard 4x3 aspect ratio screen. Widescreen Letterbox preserves the 16x9 aspect ratio of the original theater version, but the image is placed in a 4x3 space, so black bars appear at the top and bottom of the image. Enhanced Widescreen also preserves the aspect ratio of the origi- nal theater version and is designed to be used with content that is Enhanced for Widescreen TVs. This option yields more detail than Widescreen Letterbox. Native reduces the Standard size to match the height of Enhanced Widescreen.
Manual Sync The projector adjusts signal synchronization automatically for most computers. But if the projected computer image looks fuzzy or streaked, try turning Auto Image off then back on again. If the image still looks bad, try adjusting the signal synchronization manually:
1 Turn Auto Image off.
2 Highlight Manual sync, then press the left or right mouse but- ton repeatedly until the image is sharp and free of streaks.
Manual Tracking, Horiz. Posi-
tion and Vert. Position options
Manual Tracking The projector adjusts tracking automatically to match the video signal from your computer. However, if the display shows evenly spaced, fuzzy, vertical lines or if the projected image is too wide or too narrow for the screen, try turning Auto Image off then back on again. If the image is still bad, try adjusting the tracking man- ually:
are available only for computer
sources. The projector sets these
options automatically for video
sources.
1 Turn Auto Image off.
2 Highlight Manual tracking, then press the left or right mouse button repeatedly until the fuzzy vertical bars are gone.

U s i n g t h e P r o j e c t o r
Horizontal position Follow these steps to manually adjust the horizontal position:
1 Turn Auto Image off.
2 Highlight Horizontal position, then press the left mouse but- ton to move the image right or press the right mouse button to move the image left.
Positioning adjustments are saved when you power off the pro- jector.
Vertical position Follow these steps to manually adjust the vertical position.
1 Turn Auto Image off.
2 Highlight Vertical position, then press the left mouse button to move the image down or press the right mouse button to move the image up.
Positioning adjustments are saved when you power off the pro- jector.
This option allows you to digitally zoom a computer image. Highlight Zoom, then press either mouse button. A rectangle appears on the screen. Use the arrow buttons on the keypad or the disk mouse on the remote to move the rectangle to the area you want to zoom, then click the right mouse button (not the left mouse button). The image is zoomed. To zoom further, press the right mouse button, move the rectangle to the desired area, then press the right mouse button again. You can zoom three times. To return the image to normal view, press the left mouse button. The zoom rectangle appears. To cancel zoom, press the left mouse again or activate the menu.
available when a computer source
is active. It is not available for
video sources.
Zoom

Display Audio Image Controls Language Status >
Standby time 1 minute Ceiling projection off Rear projection off Default source computer VESA Auto source select off Plug and Play off USB: Mouse Button left/right USB: Inhibit Screen Saver off Display messages on Display startup screen on
When Video standard is set to Auto, the projector attempts to pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL- N,PAL-60, or SECAM) automatically based on the input signal it receives. (The video standard options may vary depending on your region of the world.) The input signal for SECAM video is similar to other video signals and cannot be automatically detected, therefore SECAM must be chosen manually. If the pro- jector is unable to detect the correct standard, the colors might not look right or the image might appear “torn.” If this happens, manually select a standard by clicking the left or right mouse but- ton and cycling through the standards.
video standard used in your geo-
graphical area, it’s often best to
manually select it.
Standby Time This option lets you select how long the lamp stays on and the blank screen is displayed when the projector enters standby mode before the projector turns off. Select among instant, 1, 5, 10, 15 and 30 minutes and 1 and 2 hours by clicking the left or right mouse button and cycling through the options.

U s i n g t h e P r o j e c t o r
Ceiling Projection When you turn Ceiling Projection on, the projector turns the image upside down for ceiling-mounted projection. Highlight Ceiling Projection, then click the left or right mouse button to turn this feature on and off.
Rear Projection When you turn Rear Projection on, the projector reverses the image so you can project from behind a translucent screen. High- light Rear Projection, then click the left or right mouse button to turn this feature on and off.
Default Source Default Source toggles among Computer RGBHV, Computer VESA, Computer M1 Analog, Computer M1 Digital, Computer CableWizard and Component Video, Composite Video, and S-video. This determines which source the projector checks first for active video during power-up. Highlight Default Source and click the left or right mouse button to toggle among the options.
Auto Source Select This setting toggles between On and Off. When this feature is Off, the projector defaults to the source selected in Default Source. To display another source, you must manually select one by press- ing the source button on the keypad or the computer or video but- ton on the remote. When this feature is On, the projector automatically finds the active source, checking the default source first. Highlight Auto Source Select and click the left or right mouse button to turn this feature on and off.
Plug and Play This setting toggles between On and Off. When it is On, most new computers will automatically recognize the projector, then set the monitor resolution and refresh rate accordingly. You need to set the Plug and Play setting to Off for the projector to display properly on some older computers. The Plug and Play setting does not affect video images. If the projector’s display constantly changes between the com- puter image and the message, “Perfecting the image”, you may need to turn Plug and Play Off.

USB: Mouse Button This setting toggles between Left/Right and Page up/Page down. Use Page up/Page down if you want to use the remote or keypad mouse buttons to advance slides in PowerPoint. A type B USB mouse cable must be connected to use this feature. See page 11 for details. This feature is available for PC Computer RGBHV and VESA sources only. It is not supported on the Macin- tosh platform.
USB: Inhibit Screen Saver This setting toggles between On and Off. When it is On, your computer’s screen saver will not be activated. A type B USB mouse cable must be connected to use this feature. See page 11 for details. This feature is available for PC Computer RGBHV and VESA sources only. It is not supported on the Macintosh plat- form.
Display Messages This setting toggles between On and Off. When this feature is On, status messages such as “No signal detected” or “Standby Active” appear in the lower-right corner of the screen. Click the left or right mouse button to turn this feature off and not see sta- tus messages.
Display Startup Screen This setting toggles between On and Off. When this feature is On, the startup screen appears when the projector starts up and remains until an active source is detected. The startup screen con- tains contact information. Click the left or right mouse button to turn this feature off and display a plain black or blue screen instead of the startup screen.

U s i n g t h e P r o j e c t o r
Display Audio Image Controls Language Status >
English Francais Deutsch Espanol ~
You can display the on-screen menus in English, French, German, Spanish, Chinese or Japanese.
This is a read-only window for informational purposes. To dis- play the status window, select Show status from the menu, then click the left or right mouse button. To remove the window, click the left or right mouse button.
Display Audio Image Controls Language Status
Lamp hours used Computer resolution Horizontal refresh rate Vertical refresh rate Mute status Source Speakers Software version Startup screen version Boot version 1.0 CableWizard version 1.0
0039 1024x768 60.03 KHz 75.04 Hz off computer VESA internal 1.0 1.0

Lamp hours used Indicates how many hours the current lamp has been in use. The counter starts at zero hours and counts each hour the lamp is in use. After 1,900 hours, the message “Change Lamp” temporarily appears on the screen when the projector is turned on. Change the bulb when the brightness is no longer acceptable. See “Replacing the Projection Lamp” on page 41 for details.
Computer resolution Shows your computer’s resolution setting. To change this, go to your computer’s Control Panel and adjust the resolution in the Display tab. See your computer’s user’s guide for details.
Horizontal refresh rate The time period that one horizontal line is displayed.
Vertical refresh rate The time period that one video frame is displayed.
Mute status Indicates if the audio is muted. Mute is only available on the optional remote.
Source Indicates the active source: Computer RGBHV, Computer VESA, Computer M1 Analog or Computer M1 Digital, Computer CableWizard, Component Video, Composite Video, or S-Video.
Speakers Indicates if external speakers are connected.
Software version Indicates the projector’s software version. This information is useful when contacting Technical Support.
Startup screen version Indicates the projector’s startup screen version. This information is useful when contacting Technical Support.
Boot version Indicates the projector’s boot software version. This information is useful when contacting Technical Support.
CableWizard version Indicates the CableWizard’s software version. This information is useful when contacting Technical Support.

U s i n g t h e P r o j e c t o r

This section describes how to:
Follow these steps to clean the projection lens:
1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
2 Lightly wipe the cleaning cloth over the lens in a circular motion.
3 If you don’t intend to use the projector immediately, replace the lens cap.
The lamp hour counter in the Status menu counts the number of hours the lamp has been in use. After 1,900 hours, the message “Change Lamp” temporarily appears on the screen when the pro- jector is turned on. Replace the lamp when the brightness is no longer acceptable. You can order new lamp modules from your InFocus dealer. See “Accessories” on page 50 for information.
allow the projector to cool for at
least 30 minutes before you open
the lamp module door. Never
Follow these steps to replace the projection lamp:
extract the lamp module while the
lamp is operating.
1 Turn off the projector by unplugging the power cord.
2 Wait 30 minutes to allow the projector to cool thoroughly.
3 Use a screwdriver to remove the seven screws on the back of the projector (Figure 29).

M a i n t e n a n c e & T r o u b l e s h o o t i n g
when removing the lamp module.
In the unlikely event that the bulb
ruptures, small glass fragments
may be generated. The lamp
module is designed to contain
these fragments, but use caution
when removing the lamp module.
Removing the screws on the lamp door
4 Loosen the three captive screws on the outside of the module.
projector with the lamp door open
or removed. This disrupts the air
flow and causes the projector to
overheat.
Loosening the screws on the lamp module

5 Lift and grasp the metal handle and pull the module out (Fig- ure 31). Dispose of the lamp module in an environmentally proper manner.
Removing the lamp module
6 Install the new lamp module, being sure to align the connec- tors properly.
7 Push the module in until it is flush with the case of the projec- tor.
lamp module or touch the glass
bulb! The glass may shatter and
8 Tighten the three screws on the outside of the module.
cause injury.
9 Replace the lamp door and re-install the seven screws.
10 Plug in the power cord and press the power button to turn the projector back on. The lamp hour counter in the Status menu is automatically reset to zero.

M a i n t e n a n c e & T r o u b l e s h o o t i n g
The life of the batteries depends on how often and how long you use the remote. Symptoms of low battery charge include erratic responses when using the remote and a reduced range of opera- tion.
Follow these steps to replace the batteries:
1 Turn the remote face down in your hand.
2 Slide the battery cover off the end of the remote.
3 Remove the old batteries and dispose of them in an environ- mentally proper manner.
4 Install two new AA alkaline batteries. Make sure you install each in the correct direction.
5 Slide the battery cover back on the remote.
The projector has a security connector for use with a PC Guardian Cable Lock System (Figure 32). See “Optional Accessories” on page 50 for ordering information. Refer to the information that came with the lock for instructions on how to use it to secure the projector.
Installing the security lock

Problem: Nothing on projection screen

M a i n t e n a n c e & T r o u b l e s h o o t i n g
If you’re using Windows 98:
1 Open “My Computer” icon, the Control Panel folder and then the Display icon.
2 Click the Settings tab.
3 Verify that the Desktop area is set to 1280x1024 or less.

Problem: Image is “noisy” or streaked Try these steps in this order.
1 Deactivate the screen saver on your computer.
2 Turn Auto Image off and then back on again. See “Auto Image” on page 32.
3 Turn Auto Image off and adjust the synchronization and track- ing manually to find an optimal setting. See “Manual Sync” on page 33 and “Manual Tracking” on page 33.

M a i n t e n a n c e & T r o u b l e s h o o t i n g
The most current troubleshooting information can be found in the Service and Support section of our website at http://www.infocus.com/service You’ll also find a Technical Library, FAQs, and support contacts including a technical sup- port e-mail form.
Before calling your dealer or InFocus Technical Support for assis- tance, please have the following information available:
Call InFocus Technical Support at 1-800-799-9911 between 6 a.m. and 6 p.m. PST, Monday through Friday. Service is available in North America after hours and on weekends for a fee at 1-888-592-6800.
In Europe, call InFocus in The Netherlands at (31) 35-6474010 between 8 a.m. and 6 p.m. Central European Time.
In Asia, call (65) 332-0659 between 9:30 a.m. and 5:30 p.m.
Or, send us an e-mail at techsupport@infocus.com

Specifications
The projector must be operated and stored within the tempera- ture and humidity ranges specified.
Temperature Operating 50 to 104° F (10 to 40° C) Non-operating -4 to 158° F (-20 to 70° C)
Humidity Operating and non-oper. 10% to 90% relative humidity, non-condensing
16.5 x 8.25 x 19.5 inches (cm)
Weight 25.5 lbs. (11.5 kg) unpacked
Altitude Operating 0 to 10,000 feet (3,048 meters) Non-operating 0 to 20,000 feet (6,096 meters)
Optics Focus Range 3.3 - 40 feet (10-12 m)
Lamp Type 230-watt UHP lamp
Input Power Requirements 100-120VAC 5A;50/60Hz 200-240VAC 3A; 50Hz
Dimensions

A p p e n d i x
Standard Accessories (ship with the projector) Part Number
Laser Pro Remote Control 590-0275-xx
Projection Lamp Module (one in projector) SP-LAMP-LP9
User’s Guide CD 010-0265-xx
Power Cords (one ships with projector, type depends on country)
North American Power Cord 210-0023-xx
approved accessories. Other
Australian Power Cord 210-0027-xx
products have not been tested with
UK Power Cord 210-0028-xx
the projector.
European Power Cord 210-0029-xx
Danish Power Cord 210-0030-xx
Swiss Power Cord 210-0031-xx
ATA Shipping Case CA-C204
items by contacting your dealer or
900 Series Long Throw Zoom Lens HW-LENS-LL02
InFocus Catalog Sales at
900 Series Wide Angle Zoom Lens HW-LENS-LW01
1-800-660-0024.
900 Series Ultra Wide Angle Lens (rear projec- tion)
M1-DA Digital Computer Cable w/ USB SP-DVI-D
M1 to VGA/USB-Analog Computer Cable SP-DVI-A
CableWizard Extension Cable, non-plenum rated, 60.7 ft SP-CW2EXT
CableWizard Extension Cable, plenum-rated, 60.7 ft SP-CW2EXTP
CableWizard Extension Cable (70’) SP-CW2-IEXT
3rd year Advantage Service Plan EW-LP9xx-12
Projector Cable Cover HW-CBLCVR9XX

Ceiling Mount Kit (10” base box) SP-CEIL-LM9x
Ceiling Mount Adapter Plate (10” base box) SP-CEIL-P9
Ceiling Mount Adapter Plate (12” base box) SP-CEIL-P9A
LiteMount False Ceiling Plate SP-LTMT-PLT
LiteMount Pipe Tubing Extension-Black SP-LTMT-EXT
LiteMount Pipe Tubing Extension-Gray SP-LTMT-EXT-GRAY
CableWizard Extension Cable Wall Plate SP-CWWALL
Wired Remote Cable SP-WIREM
GyroMouse Pro RF Remote (40’, not limited to line of sight)
RemotePoint RF Remote Control w Laser Pointer HW-RF-REMLSR
GyroMouse Presenter RF Remote Control HW-RF-GPRES
Full-Feature LaserPro Remote Control HW-LASERPRO
Executive Plus Remote Control (4 Button) HW-EXPLUS
Executive Remote IR Receiver HW-EXRCVR
PC Guardian Projector Cable Lock SP-LOCK
40” Diagonal Portable Projection Screen HW-PORTSCR40
50” Diagonal Portable Projection Screen HW-PORTSCR50
60” Diagonal Portable Projection Screen HW-DLXSCRN
84” Diagonal Pull Down Projection Screen HW-WALLSCR84
Portable Projector Stand SP-STND
Deluxe Wheeled Projector and Computer Cart HW-CART
Appian Traveler (Digital/Analog CardBus PC Card)
eBeam (Web Enabled Electronic Meeting Assistant
BNC to BNC Cable (Composite Video) SP-BNC
5BNC to 5BNC Cable SP-5TO5
5BNC to HD15 Cable (VESA) SP-5TO15
15’ Mac Extension Cable SP-MAC15
50’ Mac Cable-Domestic SP-MAC50-D
50’ Mac Cable-International SP-MAC50-I
15’ VGA Extension Cable SP-VGA15
50’ VGA Cable-Domestic SP-VGA50-D
50’ VGA Cable-International SP-VGA50-I
S-Video Cable SP-SVIDEO

A p p e n d i x
Many laptop computers do not automatically turn on their exter- nal video port when a projector is connected. Activation com- mands for some laptop computers are listed in the following table. (If your computer is not listed or the given command does not work, refer to the computer’s documentation for the appro- priate command.) On many laptops, the activation function key
is labeled with an icon, for example or the text CRT/LCD.
Key command to activate port
Key command to de-activate port
commands once activates the
external video port, pressing it
Acer Ctrl-Alt-Esc (for setup) Ctrl-Alt-Esc (for setup)
again activates both the external
AST* ** FN-D or Ctrl-D FN-D or Ctrl-D
and internal ports, and pressing it
a third time activates the internal
type from A:/IVGA/CRT type from A:/IVGA/CRT
port. Refer to your computer’s
documentation for details on your
specific model.
AMT setup screen setup screen
FN-F3 FN-F6
setup VGA/ Conf.Simulscan
setup VGA/ Conf.Simulscan
F2/Choose Option/F5 F2/Choose Option/F5
Amrel* ** setup menu setup menu
Apple see Mac Portable and Mac PowerBook
BCC* automatic reboot computer

Key command to activate port
Key command to de-activate port
Bondwell LCD or CRT options after bootup
reboot for LCD or CRT options to appear
Chaplet** setup screen setup screen
FN-F4 FN-F4
Compaq* ** Ctrl-Alt-< Ctrl-Alt->
mode/? (for setup option) mode/? (for setup option)
Compuadd* ** automatic automatic
Alt-F for screen setup option
Alt-F for screen setup option
Data General Ctrl-Alt-Command Ctrl-Alt-Command
2 CRT/X at DOS prompt reboot
FN-F4 FN-F4
FN-F8 (CRT/LCD) FN-F8
FN-D FN-D
FN-F12 FN-F12
FN-F2 FN-F2
Dolch dip switch to CRT dip switch to LCD
Epson dip switch to CRT dip switch to LCD
Everex* setup screen option setup screen option

A p p e n d i x
Key command to activate port
Key command to de-activate port
Gateway FN-F3 FN-F1/FN-F1 again simul- taneous
Grid* ** FN-F2, choose auto or simultaneous
Hyundai setup screen option setup screen option
IBM 970* automatic warm reboot
IBM ThinkPad** reboot, enter setup menu FN-F2
FN-F7, select choice from setup menu
PS/2 SC select choice (CRT, LCD, etc.)
Kaypro boot up, monitor plugged in
Kris Tech FN-F8 FN-F8
Leading Edge FN-T FN-T
Mac Portable 100 no video port: not compatible
140, 145, 150, 170 no video port: requires a 3rd-party interface
160, 165, 180, 520, 540, 5300 Control Panel folder, Pow- erBook Display folder; Activate Video Mirroring
210, 230, 250, 270, 280, 2300 requires Apple Docking Station or Mini Dock

Key command to activate port
Key command to de-activate port
Micro Express* automatic warm reboot
Microslate* automatic warm reboot
Mitsubishi SW2 On-Off-Off-Off SW2 Off-On-On-On
NCR setup screen option setup screen option
NEC* ** setup screen option setup screen option
CRT at the DOS prompt LCD at the DOS prompt
FN-O/* FN-O/*
Packard Bell* ** FN-F0 FN-F0
Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup
Samsung* setup screen option setup screen option
Sanyo setup screen option setup screen option
Sharp dip switch to CRT dip switch to LCD
setup screen option setup screen option
setup screen option setup screen option
Top-Link* ** setup screen option setup screen option
Toshiba* ** Ctrl-Alt-End Ctrl-Alt-Home
setup screen option setup screen option

A p p e n d i x
Key command to activate port
Key command to de-activate port
Wyse software driven software driven
FN-F1 FN-F1
* These manufacturers have models that automatically send video to the external CRT port when some type of display device is attached.
** These manufacturers offer more than one key command depend- ing on the computer model.

When you turn video mirroring (called SimulScan in newer Pow- erBooks—see below) on, the projector displays the same informa- tion that appears on your PowerBook’s built-in screen. When video mirroring is off, the projector acts like a separate display.
To turn on video mirroring for the first time:
1 Open the Monitors control panel; click on Monitor 2.
2 Set the number of colors you want.
3 Open the Control Strip, then click on the monitor icon.
4 Select “Turn Video Mirroring On.”
Now you can turn video mirroring on and off from the Control Strip without having to open the Monitors control panel again.
When using video mirroring and high color graphics such as slide shows, the projected image occasionally might turn black and white. If this happens, perform the following steps:
1 Turn off video mirroring.
2 Open the Monitors control panel.
3 Move the white menu bar to Monitor 2 to set the projector as the primary monitor.
4 Restart the PowerBook.
Using SimulScan Some newer PowerBooks display images on an external monitor or projector differently than previous ones. When using SimulScan, the projector displays the same information that appears on your PowerBook
To select SimulScan:
1 Open the Control Panel, then double-click Monitors and Sound.
2 In the Resolution list, choose the SimulScan mode, then click OK.
3 If this changes your display settings, a dialog box appears. Click OK to confirm the change.

A p p e n d i x
determine projected image sizes.
to Screen-Short Throw Lens
(feet) 300 240 33 28 240 192 27 22 180 144 20 17 144 115 16 13 120 96 13 11 96 77 11 9 72 58 8 7 60 48 7 6 48 38 5 4
www.infocus.com for an interactive
image size calculator. It is located
to Screen-Long Throw Lens
in the Technical Library in the
Service and Support section.
(feet) 300 240 86 51 240 192 69 41 180 144 52 31 144 115 41 24 120 96 34 20 96 77 28 16 72 58 21 12 60 48 17 10 48 38 14 8

Communication configuration To control the projector from an LCD control panel or terminal software, connect a null modem type RS232 cable and set your computer’s serial port settings to match this communication con- figuration:
Bits per second 19,200
Here are the pinouts of the RS232 connector (outputs and inputs are relative to the projector):
Command format All commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request can be a read request (indicated by a “?”) or a write request (indicated by 1 to 4 ASCII digits).
( starts the command
AAA denotes the command
? denotes the read request
) ends the command

A p p e n d i x
A read command returns the range and the current setting, for example:
Brightness (BRT?) (0-22, 10)
Volume (VOL?) (0-80, 0)
Lamp hours (LMP?) (0-9999, 421)
( starts the command
AAA denotes the command
#### denotes the value to be written (leading zeros not necessary)
) ends the command
Some commands have ranges, while others are absolute. If a number greater than the maximum range is received, it is auto- matically set to the maximum number for that function. If a com- mand is received that is not understood, a “?” is returned. With absolute settings, “0” is off, 1-2147483647 is on. The one exception is the Power command, where 0 is off and 1 is on.
can process a command, wait 3
seconds before entering the next
command.
Brightness (BRT10) Sets the brightness to 10
Freeze (FRZ1) Freezes the display
Power (PWR0) Turns power off
Power (PWR1) Turns power on
Lamp Hours (Read only) LMP 0-9999

Reset All RST 0-1
Auto Source Select Control ASC 0-1
Default Source DSC 0-9 0 = Computer RGBHV 1 = Computer VESA 2 = Computer M1 analog 3 = Computer M1 digital 4 = Computer CableWizard 5 = Feature Card Analog (not currently available) 6 = Feature Card Digital (not currently available) 7 =Component Video 8 = Composite Video 9 = S-video
Source SRC 0-9 (same designations as Default Source)
Image Position IPO 0-2
Auto Image AIM 0-1
Manual Sync Setting MSS 0-20
Manual Tracking Setting MTS 800-2112
Horizontal Position Setting HPS 0-256

A p p e n d i x
USB:Inhibit Screen Saver UIS 0-1
USB:Mouse Button UMB 0-1
Vertical Position Setting VPS 0-28
Video Standard VSU 0-6 0 = NTSC 1 = PAL 2 = PAL-M 3 =PAL-N 4 = SECAM 5 = NTSC4.43 6 = PAL-60
Language LAN 0-5 0 = English 1 = French 2 = German 3 = Spanish 4= Chinese 5= Japanese
Video Connection Status VCS 0-2147483647
TV Connector Control TVC 0-3
Color Temperature TMP 0-25
System State SYS 0-2147483647
Standby Time SBT 0-7
Power Off Time POT 0-7
Plug and Play PAP 0-1
Splash Screen DSU 0-1
Display Message DMG 0-1
Blank Screen Color BSC 0-1
Audio Select ASL 0-3
Audio Mode AMO 0-2147483647
Audio Connection Status ACS 0-2147483647
Rear Project REA 0-1





InFocus Corporation (“InFocus”) warrants that each LP930 (“the Product”) sold hereunder will conform to and function in
accordance with the written specifications of InFocus. Said limited warranty shall apply only to the first person or entity
that purchases the Product for personal or business use and not for the purpose of distribution or resale. Said warranty
shall continue for a period of two (2) years from the date of such purchase. The standard limited warranty excludes the
lamps in projectors after 90 days and the accessories after one year. InFocus does not warrant that the Product will meet the
specific requirements of the first person or entity that purchases the Product for personal or business use. InFocus’ liability
for the breach of the foregoing limited warranty is limited to the repair or replacement of the Product or refund of the pur-
chase price of the Product, at InFocus’ sole option. Replacement Product may be re-furbished in “like-new” condition, at
InFocus’ sole discretion. To exercise the Purchaser’s rights under the foregoing warranty, the Product must be returned at
the Purchaser’s sole cost and expense, to InFocus or to any authorized InFocus service center provided, and the Product
must be accompanied by a written letter explaining the problem and which includes (i) proof of date of purchase; (ii) the
dealer’s name; and (iii) the model and serial number of the Product. When sending your unit in for repair, please ship your
unit in its original packing material or an InFocus approved ATA Shipping Case, or have a professional packaging com-
pany pack the unit. Please insure your shipment for its full value. A return authorization number, issued by the InFocus
customer service department, must also be clearly displayed on the outside of the shipping carton containing the Product.
Product Warranty for applicable warranty information.
InFocus shall have no further obligation under the foregoing limited warranty if the Product has been damaged due to
abuse, misuse, neglect, accident, unusual physical or electrical stress, unauthorized modifications, tampering, alterations,
or service other than by InFocus or its authorized agents, causes other than from ordinary use or failure to properly use the
Product in the application for which said Product is intended.
THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PURCHASE. ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. THERE ARE NO WARRANTIES
THAT EXTEND BEYOND THE FACE HEREOF AND THE FOREGOING WARRANTY SHALL NOT BE EXTENDED,
ALTERED OR VARIED EXCEPT BY WRITTEN INSTRUMENT SIGNED BY INFOCUS. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY TO
YOU.

IT IS UNDERSTOOD AND AGREED THAT INFOCUS’ LIABILITY WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE RETURN OF THE AMOUNT OF THE PURCHASE PRICE PAID BY PURCHASER AND UNDER NO CIRCUMSTANCES SHALL INFOCUS BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOST PROFITS, LOST REVENUES OR LOST SAVINGS. THE PRICE STATED FOR THE PRODUCT IS A CONSIDERATION IN LIMITING INFOCUS’ LIABILITY. NO ACTION, REGARDLESS OF FORM, ARISING OUT OF THE AGREEMENT TO PURCHASE THE PRODUCT MAY BE BROUGHT BY PURCHASER MORE THAN ONE YEAR AFTER THE CAUSE OF ACTION HAS ACCRUED. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPE- CIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Part Number 010-0264-00
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.