Instruction/ maintenance manual of the product Total Speaker Solutions Infinity
Go to page of 12
TSS-7 50 Owner’ s Guide (230V) T OT AL S PEAKER S OLUTIONS.
ii TSS-750 Robin Marshall Harman Consumer International Chateau-du-Loir , France 6/03 Declaration of Conformity We, Har m an Consumer International 2, route de T ours 72500 Chateau-du-Loir France decl.
iii TSS-750 ii Important Safety Pr ecautions 1 Introduction 1 Unpacking the System 1 Planning Y our System 2 Placement 2 Wa ll-Mounting the Satellites 3 Center and Satellite Speaker Connections 4 Subw.
Infinity T o tal Solutions Infinity T otal Solutions continues Infinity’ s longstanding commitment to accurate sound r eproduction. Our pr oprietary Metal Matrix Diaphr agm (MMD ™ ) driv ers, prec.
2 TSS-750 T he TSS-750 satellites are designed to be mounted on the wall. T her e is a wall bracket for each satellite speaker . NOTE: T he customer is responsible for the cor rect selection and use of mounting hardwar e (available thr ough hardwar e stores) that will ensure the pr oper and safe wall-mounting of the speakers .
C ENTER AND S A TELLITE S PEAKER C ONNECTIONS T urn Off All Pow er After placing the speakers , you are r eady to connect your system. Fir st, turn off all audio-system power . Use high-quality speaker wire to make your connections. Speaker wire with polarity coding is included.
4 TSS-750 A F ew Suggestions We r ecommend that you do not operate your speaker s or subwoofer with the bass, treble and loudness controls set to full boost.
5 TSS-750 S UBWOOFER C ONNECTIONS If your r eceiver/processor does no t cont ain a Dolby Digi tal or DTS processor bu t has a subwoofer ou tput: Set NORMAL/LFE swi tch to “NORMAL. ” NOTE: If your recei ver/pr ocessor has only one sub out, you may use either the L or R input.
6 O PERA TION Surround Modes W hen using the TSS-750 in a Dolby Pro Logic* home theater system, make sur e the receiv er’ s center channel mode is set to “Normal. ” When using the system in a Dolby Digital or DTS home theater system, make sur e all speakers are set to “Small” .
7 TSS-750 TSS-7 50 Sat ellit es Cent er Channel Fr equency Range: 120Hz – 20,000Hz (±3dB) 120Hz – 20,000Hz (±3dB) Recommended Amplifier Pow er Range: 10 – 100 watts 10 – 125 watts Sensit ivity: 88dB 89dB (2.
8 TSS-750 N O TES.
© 2003 Harman International Industries , Incorporated Infinity Systems, 250 Crossways Par k Drive, Woodbury, NY 11797 USA 800.553.3332 (USA only) www .infinitysystems.com *T r ademarks of Dolby Laboratories. DTS is a registered trademark of Digital Theater Systems, Inc .
An important point after buying a device Infinity Total Speaker Solutions (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Infinity Total Speaker Solutions yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Infinity Total Speaker Solutions - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Infinity Total Speaker Solutions you will learn all the available features of the product, as well as information on its operation. The information that you get Infinity Total Speaker Solutions will certainly help you make a decision on the purchase.
If you already are a holder of Infinity Total Speaker Solutions, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Infinity Total Speaker Solutions.
However, one of the most important roles played by the user manual is to help in solving problems with Infinity Total Speaker Solutions. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Infinity Total Speaker Solutions along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
