Instruction/ maintenance manual of the product NV30CN Infinity
Go to page of 26
USA: EURO-PRO Operating LLC Canada: EURO-PRO Ope rating LLC 94 Main Mill Stree t, Door 16 4400 Bois Franc Plattsburgh, NY 12901 St. Laurent, QC H4S 1A7 Tel.: 1 (888) 668-9600 www.infinityvac. com OWNER’S MANUAL MANUAL DEL USUARIO MANUEL D'UTILISATION Model- Modelo-Modèle: NV30CN 120V.
.
IMPORTANT SAFETY INSTRUCTIONS When using an electrica l appliance, bas ic safety precautions should alwa ys be observed, incl uding the following: SAVE THESE INSTRUCTIONS For Household Use Only 1 Rev. 09/06 D Warning: To reduce the risk of electr ic shock, this applia nce has a polar ized plug (one blade is w ider than the othe r).
PRECAUTIONARY MEASURES Important 1. Do not operate the vacuum cleaner too close to heaters, or radiators. 2. Before inserting the power plug into the wall ou tlet, make sure that your hands are dry.
Fig. 52 Fig. 51 Fig. 52 GETTING TO KNOW YO UR CYCLONIC UPRIGHT VACUUM Technical Specifications Voltage: 120V., 60Hz. Power: 12 Amps Note: Illustrations may differ from actual unit. 3 14. Lower Hose Holder 15. Super Stretch Hose 16. Crevice Tool 17. Upholstery Brush 18.
Fig. 3 Press ASSEMBLY INSTRUCTIONS WARNING: Always remove the power plug from the electrical outlet before assembling or remo ving accessories. 4 Telescopic Wand Height Adj us t me nt Fig. 1 Inserting & Remov ing the Telescopi c Wand into the M ain Unit 1.
To attach the accessories t o the telescopic wand: 1. Press the telescopic wand release button and pull the telescopic wand out of the vacuum. (Fig. 10) 2. Push the desired accessory onto the end. (Fig. 11, Fig. 12) 3. To remove the accessories, just pull them out.
Vacuuming Floors & Ca rpets The upright vacuum can be used to vacuum all types of carpeting and bare floors. The carpet-to-floor selector should only be adjusted while the vacuum cleaner is turned on and is in the upright position. 1. Turn the quick release cord holder 180° to either side to release the power cord.
Fig. 35 Base du Conteneur de filtres Filtre de feutre Filtre de mousse Conteneur de filtres 5. Lorsque les filtres sont secs, replacez-les dans le conteneur de filtres. Insérez le filtre de mousse (filtre 1) puis placez le filtre de feutre (filtre 2) sur le filtre de mousse.
Fig. 28 Collecteur cyclone Bouton de dégagement inférieur 5. Assurez-vous que le bac à poussière et l’écran de débris sont complètement secs avant de réassembler. 6. Pour replacer l’écran à débris, insérez le dans le bac à poussière.
Emptying & Cle aning the Cy clonic Chamber Periodically the cyclonic chamber will need to be emptied and cleaned. T his does not have to be done ever y time the dust cup is emptied but it is recom.
Comment ajuste r la hauteur d e tapis ATTENTION : Pour éviter les blessures, Éloignez les cheveux, les vêtements, les doigts et toute partie du corps des ouvertures et des pièces mobiles (tel que le rouleau de la brosse). Mettez l’aspirateur en position Arrêt et débranchez le avant d’ajuster l’aspirateur pour la h auteur du tapis.
Locking Pin Fig. 40 MAINTENANCE INSTRUCTIONS Motor Thermostat 11 Important : This unit is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur: • Push the On/Off button once.
TROUBLESHOOTING 12 37 Cleari ng th e Dust Cup Air Du ct 1. Unplug the vacuum. 2. Check fullness of the dust cup, if full, remove and empty the dust cup. 3. Check the air duct behind the dust cup for any blockage. (Fig. 43) Dust Cup Air D u ct Fig. 43 4.
13 TROUBLESHOOTING Cleaning & Changing th e Belt WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/trouble shooting checks. 2. Check to see if there is a clog just behind the brush roll.
TROUBLESHOOTING 14 8. Once having removed the brush roll completely, you will be able to easil y remove the belt from the motor driven shaft. (Fig. 53) Fig. 53 9. Slide one end of the new belt over the drive shaft, and the other end of the belt around the brush roll.
PROBLEM SOLVING This appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory. If a minor probl em occurs, it usually can be solved quite easily when the cause is foun d. T herefore, this checkl ist is provided for your convenience.
Printed in China TWO (2) YEARS LIMITED WARRANTY EURO-PRO Operating LLC wa rrants this product to be free from defects in materi al and work manship fo r a period of tw o (2) year s from the date of the original purchase, when utilized for no rmal househo ld use, subject to the follo wing conditions, exclusio ns and exceptions .
INSTRUCCIONES IMPORTANTES DE SEGURIDAD Al usar apa ratos eléc tricos, sie mpre debe segu ir precauciones bá sicas de segur idad, incluyendo las siguientes: CONSERVE ESTAS INSTRUCCIONES Para Uso Doméstico Solamente 17 Rev.
MEDIDAS DE PRECAUCIÓN Importante 1. No use la aspiradora cerca de calefactores o radiadores. 2. Antes de enchufar el cable en un tomacorriente, asegúrese de tener las manos secas.
COMPONENTES DE SU ASPIRADORA VERTICAL CICLÓNICA Especificacion es Técnicas Voltaje: 120V, 60Hz. Potencia: 12 Amperes Nota: El dibujo puede no ser igual al producto real. 19 17. Cabezal para T apizados 18. Accesorio para Tierra 19. Soporte Superior de la Manguera 20.
INSTRUCCIONES DE ARMADO ADVERTENCIA : Siempre desenchufe el cable de alimentación del tom acorrie nte antes de instalar o quitar accesorios. 20 Fig. 2 Fig. 3 Presione Clavija de Traba del Mango Fig. 1 Ajuste de Altura del Tubo Telescópico Instalación y Remoción del Tubo Telescópico e n la U nidad Principa l 1.
Cabezal Esquinero Para radiadores, ranuras, esquinas, zócalos y entre almohadones. Cepillo para Tapizados El cepillo para tapizados es dos cepillos en uno. Para usarlo como cepillo para tapizados, deberá quitar el accesorio con las cerdas. Para quitarlo, simplemente separe las dos partes.
Limpieza de Pi so s y Alfombras La aspiradora vertical se pue de usar en todo tipo de alfombras y pisos. El selector de “Alfombra/Piso” solo debe ajustarse con la aspiradora encend ida y en su posición vertical. 1. Gire el gancho superior del cable 18 0º para cualquier lado para desenganchar el cable.
1. Para quitar el recipiente de la tierra, presione el botón para destrabarlo y quite el recipiente. (Fig. 19) INSTRUCCIONES DE MANTENIMIENTO 23 PRESIONE Fig. 19 ADVERTENCIA : Siempre vacíe el recipiente de la tierra luego de cada uso y durante usos prolongad os.
INSTRUCCIONES DE MANTENIMIENTO 24 Separa ción del Reci pi ente para la Tierra de la Cáma ra Ciclónica 1. Quite el recipiente para la tierra. 2. Mientras sostiene el recipiente para la tierra, gire el mango en sentido contra horario para desacop l ar la cámara ciclónica.
An important point after buying a device Infinity NV30CN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Infinity NV30CN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Infinity NV30CN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Infinity NV30CN you will learn all the available features of the product, as well as information on its operation. The information that you get Infinity NV30CN will certainly help you make a decision on the purchase.
If you already are a holder of Infinity NV30CN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Infinity NV30CN.
However, one of the most important roles played by the user manual is to help in solving problems with Infinity NV30CN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Infinity NV30CN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
