Instruction/ maintenance manual of the product 641is a/d/s/
Go to page of 10
analog and digital systems 6 4 1 i s owners manual -3009 REV A ©2001 analog and digital systems, inc. 1.800.255.4434 www.adst.com.
.
1 introduction..................................................................................... 1 about this manual............................................................................ 1 features of your 6-series loudspeaker................
15 ded woofer basket - the back bone of any good woofer is it’s basket. It provides the proper align- nt and support structure for the magnet while the very thin braces guarantee a minimum of early ections off the basket that would be ordinarily transmitted as sonic colorations through the cone.
3 Study your automobile thoroughly before you drill or cut any holes. Take extra care when working near gas tanks, gas lines, brake or hydraulic lines and electrical wiring. W ear eye and ear protection when using power tools. Keep the woofers and tweeters away from metal filings and shavings.
13 ote on power handling h 6-series speaker system requires a minimum of 20 Watts per channel to achieve reasonable lis- ng volumes in a moving automobile without clipping the amplifier. a/d/s/ recommends 150 Watts channel as a maximum so as not to exceed the thermal or mechanical limitations of the speaker sys- .
5 fier about 1/4" from the end and insert into the connector input + and - positions and tighten the set screws. Strip the wire from the woofer and insert into the + and - positions for the crossover woofer output. Follow the same procedure for the connection to the tweeter.
11 nects to attach wires to the woofer . tweeter is terminated with bare wire. Use insulated butt connectors, bullet connectors, or quick dis- nects to extend the tweeter wires to the crossover location. Alternatively you may solder all con- ions and insulate them with high quality heatshrink tubing.
7 wiring / tri-amping 6-series allows conventional wiring, tri-wiring, or tri-amping using the supplied passive crossovers. le conventional wiring will provide excellent sound, tri-wiring or tri-amping will further enhance the ormance in no-compromise systems.
9 inaccessible. Give some thought to the electrical connec- tions. You may be able to fish the tweeter signal wire to the crossover network location after installation of the tweeter assembly.
An important point after buying a device a/d/s/ 641is (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought a/d/s/ 641is yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data a/d/s/ 641is - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, a/d/s/ 641is you will learn all the available features of the product, as well as information on its operation. The information that you get a/d/s/ 641is will certainly help you make a decision on the purchase.
If you already are a holder of a/d/s/ 641is, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime a/d/s/ 641is.
However, one of the most important roles played by the user manual is to help in solving problems with a/d/s/ 641is. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device a/d/s/ 641is along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
