Instruction/ maintenance manual of the product 335im a/d/s/
Go to page of 10
334 im 335 im 336 im PN# 319-1063 rev A 5/99.
2 19 declaration of conformity manufacturer’ s name: analog and digital systems, inc manufacturer’ s address: 300 wildwood avenue woburn, ma 01801 usa declares, that the product: product name: 334im 335im 336im conforms to the following standards: EN 50 081-1/1992 EN 50 082-1/3.
3 18 table of contents introduction ........................................................................................ 3 about this manual .................................................................................. 3 features of your 3-series loudspeaker .
4 17 features of your 3-series loudspeaker molded woofer basket - the back bone of any good woofer is it’ s basket. It pr ovides the proper alignment and support structure for the magnet while the very thin braces guarantee a minimum of early reflections of f the basket that would be ordinarily transmitted as sonic colorations through the cone.
5 16 warnings and tips Study your automobile thoroughly befor e you drill or cut any holes. T ake extra car e when working near gas tanks, gas lines, brake or hydraulic lines and electrical wiring. Wear eye and ear protection when using power tools. Keep the woofers and tweeters away from metal filings and shavings.
6 15 amplifier requir ements a note on power handling Each 3-series speaker system requir es a minimum of 20 W atts per channel to achieve r easonable listening volumes in a moving automobile without clipping the amplifier .
bi-wire connections to the cr ossover network connections to the woofer and tweeter are the same as the normal wiring method. Connect the amplifier to the tweeter to the terminals marked tweeter input. Connect the woofer amplifier to the woofer input terminals with another run of wire.
8 13 termination The woofer and the tweeter use .187 spade lugs for electrical connections. Use standard .187 female quick disconnects to attach wires to the speaker . speaker mounting woofer installation The 3-series woofer will fit into standard factory mounting locations using the existing mounting holes in the automobile.
9 12 crossover installation bi-wiring / bi-amping The 3-series allows conventional wiring, bi-wiring, or bi-amping using the supplied passive crossovers. While conventional wiring will provide excellent sound, bi-wiring or bi-amping will further enhance the performance in no-compromise systems.
10 11 rotating the tweeter Grasp the knob on the back side of the speaker , and gently turn it to the desired position. a/d/s/ recommends that you start with the tweeter angled so it points dir ectly at the listening area. Feel fr ee to experiment with the position that gives you the most pleasing sound quality .
An important point after buying a device a/d/s/ 335im (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought a/d/s/ 335im yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data a/d/s/ 335im - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, a/d/s/ 335im you will learn all the available features of the product, as well as information on its operation. The information that you get a/d/s/ 335im will certainly help you make a decision on the purchase.
If you already are a holder of a/d/s/ 335im, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime a/d/s/ 335im.
However, one of the most important roles played by the user manual is to help in solving problems with a/d/s/ 335im. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device a/d/s/ 335im along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
