Instruction/ maintenance manual of the product MXM-5 Impex
Go to page of 27
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model MXM-5 Retain This Manual for Reference 09-01-05 OWNER'S MANUAL MARCY SMITH MACHINE MXM-5 IMPEX 14777 DON JULIAN RD.
TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDW ARE PACK….......…....
IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assembl e or operate y our machine.
WA RNING LA BEL REPLA CEMENT The w arnin g labels show n h ere have been placed on t he Cross Brace and Up per Frame. If th e labels are missing or illegible, please call customer service at 1- 800-888-8899 for replacement s. A pply the labels in location shown.
HA RDEWA RE PA CK 4.
HA RDEWA RE PA CK 5.
HA RDEWA RE PA CK 6.
HA RDEWA RE PA CK 7.
A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches NOTE: It is strongly recommended tw o or more people assembling this machine to avoid possible inj ury. STEP 1 (See Diagram 1) A.) NOTE: Do not tighten the Nuts and Bol ts until instr ucted to do so.
DIAGRAM 1 9.
STEP 2 (See Diagram 2) A.) Attach the R ear Vertic al Beam (#23) onto the C ross Brace (#20) . Attach the W eight Glide Post (#22) to the Rear Vertical Beam and Cross Brace. Al ign the hol es and secure them with tw o M10 x 2 ¾” Carri age Bolts ( #93), ∅ ¾” W ashers (#82), and M10 Air craft Nuts (#99).
DIAGRAM2 11.
STEP 3 (See Diagram 3) A.) Attach the Butter fly Base (#24) and Butterfly Pul ley Br acket (#33) to the R ear Vertical Beam (#23). Ali gn the holes and secur e them with tw o M10 x 2 ½” C arriag e Bolts (#92), ∅ ¾” W ashers (#82), and M 10 Aircr aft Nuts (#99).
STEP 4 (See Diagram 4) A.) N ote: Help of another person is strongl y recommended for this step. Place the W eight Lifting Sleeve ( #38) in betw een the two Safety Stop Frames (#37).
CABLE LOOP DIAGRAM 14.
STEP 5 (See Diagram 5 & Cable Loop Diagram) A.) Attach a 124” Cable (#51) to the f ront opening on the Upper Frame (#21). Attach a Pul ley (#74) to the opening . Secure it with one M10 x 2 1/8” Allen Bolt (#87) , two Ø 7/8” Bushings ( #79), and one M10 Air craft Nut (#99) .
DIAGRAM 5 16.
STEP 6 (See Diagram 6 & Cable Loop Diagram) A.) Attach one end of the 79” Butter fly Cabl e (#52) to the cli p on the Left Butterfly (#25). D raw the Cable to the left Butterfly Pulley Bracket (#33).
STEP 7 (See Diagram 7 & Cable Loop Diagram) A.) Attach one 124” Cable ( #51) to the low er opening on the Rear Ver tical Beam (#23) . Attach a Pulley to the opening. Secur e it w ith M10 x 2 3/8” Allen Bol t (#88), tw o Ø 1” Bushings (#78), and one M10 Ai rcraft Nut ( #99).
STEP 8 (See Diagram 8) A.) Attach the Main Seat Support (#1) to the Front & Rear Stabiliz ers (#3 & #4). B.) Secur e each end wi th two M 10 x 3 1/8” C arriag e Bolts (#94), one 4 ¾” Cur ve Br acket (#8), tw o ∅ ¾” W ashers (#82), and tw o M10 Air craft Nuts (#99).
STEP 9 (See Diagram 9) A.) D o not tighten all nuts and bolts until instr ucted to so. B.) Attach the Leg Developer Holder (#2) to the M ain Seat Support. Secure i t with tw o M10 x 3 1/8” Carr iage Bolt s (#94), one 6 ¼” Curv e Bracket (#9), tw o ∅ ¾” W ashers (#82), and tw o M10 Aircr aft Nuts (#99).
STEP-10 (See Diagram 10) A.) Attach the Leg D eveloper (#7) to the Leg Devel oper Holder (#2). Secure i t wi th one M10 x 3 1/8” Allen Bol t (#90), tw o ∅ ¾” W ashers (#82), and one M10 Ai rcraft Nut (#99) . Do not over ti ghten the nut and bolt.
STEP-11 (See Diagram 11) A.) Attach the Arm Cur l Pad (#14) to the Ar m Curl Stand (#13). Secure it with tw o M8 x ¾” Allen Bolts ( #96) and ∅ 5/8” W ashers (#81). B.) Insert the Arm C url Stand into the openi ng on the Leg Devel oper Holder . Use a Lock Knob (#58) to secure i t in position.
SMITH MACHINE EXPLODED DIAGRAM 23.
24.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Seat Support 1 56 Ø 2 3/8” End Cap 4 2 Leg Developer Holder 1 57 2” x 1 ¾” Sleeve 1 3 Front Stabilizer 1 58 Lock Knob 1 4 Rear Stabilizer 1 59 Olym.
IMPEX LIMITED WARRANTY IMPEX warrants this product to be f ree f rom defec ts in work m anship and m aterial, under nor m al use and service c onditions, for a period of two y ear s on the Fram e from the date of pur chase. T his warranty extends only to the original purchaser.
An important point after buying a device Impex MXM-5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex MXM-5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex MXM-5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex MXM-5 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex MXM-5 will certainly help you make a decision on the purchase.
If you already are a holder of Impex MXM-5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex MXM-5.
However, one of the most important roles played by the user manual is to help in solving problems with Impex MXM-5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex MXM-5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
