Instruction/ maintenance manual of the product iH120 iHome
Go to page of 15
Model iH120 Alarm Clock For Your iPod Questions? Visit www.ihomeaudio.com Model: iH120 (Cost down version) Instruction Manual Date: Fen 10, 2009 Print color : Black text on white paper Size: 178W x 17.
T able of Contents 1 2 3 3 4 5 6 6 7 7 7 8 8 9 10 11 12 Quick Start Controls and Indicators iH120 Display Install Clock Backup Battery Using The Remote Control Unit Install/Replace the Remote Control .
• Place the unit on a level surface away from sour ces of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquer ed finish. A cloth or other protective material should be placed between it and the furniture.
Quick Start 2:inserts Select the dock insert for your iPod model from the table below and place insert in dock. Never dock an iPod without an insert in place. 3:iPod Insert iPod into dock with proper insert (iPod must not be in a skin or case). iPod will charge while docked.
Controls and Indicators 2 Front panel T op panel Alarm-1 Button << Button W ake-to Button Alarm Reset / Power Button V olume + Button V olume - Button iPod Dock Sleep Button >> Button iPod.
3 iH120 Display Install Clock Backup Batterie s The iH120 uses 2 alkaline “AA” batteries to provide continuous alarm operation and clock settings in the event of a power failure.
Pressing and holding FWD/REW while iPod is docked will scan forward/reverse within currently playing track. 4 Install/Replace the Remote Control Battery The remote contr ol battery is already installed at the factory . When the remote contr ol stops operating or its range seems reduced, it is time to replace the battery with a new one.
This unit is a PRESET Clock: the clock is preset for the corr ect Eastern Standard Time at the factory . Please follow the steps below to match settings to your location.
Setting the Alarms 1. Pr ess and hold the or Button until the alarm icon and alarm time blink. Press the or Button to set the alarm time. Holding the button for a few seconds will advance or reverse rapidly . Remember to set the correct AM or PM time.
During normal operation, press the Snooze/Dimmer Button to contr ol the brightness of the LCD display . 1. Dock the already playing iPod. The iH120 will automatically turn on and you will hear the music playing from your iPod. Note: If the playing song/music loudness is too low on the iPod itself, iH120 may not detect iPod is in play mode.
8 During normal operation, press and hold the W ake-to Button to set button click sound on or off. After the display shows “CLC”, press or Button to set click sound on or of f, then wait around 5 seconds to exit the setting mode. Sleep mode lets you sleep to your iPod, gradually lowering the volume until the unit shuts off at the selected time.
A Consumer Guide to Product Safety 9 When used in the directed manner , this unit has been designed and manufactur ed to ensure your personal safety . However , improper use can r esult in potential electrical shock or fire hazar ds.
T rouble Shooting 10 Unit doesn’t respond (no power) iPod cannot dock properly AC adaptor isn’t plugged to a wall outlet or the connector is not plugged into the power supply jack on the back of t.
11 Síntoma Posible Problema Solución Solución De Problemas El adaptador de AC no está conectado al tomacorriente o el conector no está conectado a la ficha en la parte posterior de la unidad La u.
12 iHome Products, a division of SDI T echnologies Inc. (hereafter referred to as SDI T echnologies), warrants this product to be free fr om defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original pur chase.
An important point after buying a device iHome iH120 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought iHome iH120 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data iHome iH120 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, iHome iH120 you will learn all the available features of the product, as well as information on its operation. The information that you get iHome iH120 will certainly help you make a decision on the purchase.
If you already are a holder of iHome iH120, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime iHome iH120.
However, one of the most important roles played by the user manual is to help in solving problems with iHome iH120. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device iHome iH120 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
