Instruction/ maintenance manual of the product iH12 iHome
Go to page of 14
Model iH12 Dual Alarm Cube Clock Radio For Your iPod Questions? Visit www.ihomeaudio.com Model: iH12 (Rev 1) Instruction Manual Date: Jan 3, 2008 Print color : Black text on white paper Size: 178W x 1.
1 2 3 3 4 5 6 6 7 7 7 8 8 8 8 9 10 11 12 Quick Start Controls and Indicators iH12 Display Install Clock Backup Battery Using The Remote Control Unit Install/Replace the Remote Control Battery T o chec.
1 Quick Start 2:inserts Select the dock insert for your iPod model from the table below and place insert in dock. Never dock an iPod without an insert in place. 3:iPod Insert iPod into dock with proper insert (iPod must not be in a skin or case). iPod will charge while docked.
Controls and Indicators 2 Back panel Clock Adj Button AM Loop Antenna Socket Line-in JACK Time Zone Button DST Switch Front panel T op panel Alarm-1 Button << Button W ake-to Button Alarm-2 Butt.
3 iH12 Display Install Clock Backup Batterie s The iH12 uses 2 alkaline “AA” batteries to provide continuous alarm operation and clock settings in the event of a power failure.
Install/Replace the Remote Control Battery The remote contr ol battery is already installed at the factory . When the remote contr ol stops operating or its range seems reduced, it is time to replace the battery with a new one. 1. The battery door is located on the back end of the remote contr ol.
This unit is a PRESET Clock/Radio: the clock is preset for the corr ect Eastern Standard Time at the factory . Please follow the steps below to match settings to your location.
Setting the Alarms 1. Press and hold the Alarm-1 or Alarm-2 Button until the alarm time blinks in the lower part of the display . Pr ess the << or >> Button to set the alarm time. Holding the button for a few seconds will advance or r everse rapidly .
During normal operation, press the Snooze/Dimmer Button to contr ol the brightness of the LCD display . 1. Dock the already playing iPod. The iH12 will automatically turn on and you will hear the music playing from your iPod. Note: If the playing song/music loudness is too low on the iPod itself, iH12 may not detect iPod is in play mode.
Setting up Antenna 1. Plug the AM antenna cable into the AM Loop Antenna Socket on the back of unit. Move antenna 12” away from unit for best reception. 2. Extend FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
A Consumer Guide to Product Safety 9 When used in the directed manner , this unit has been designed and manufactur ed to ensure your personal safety . However , improper use can r esult in potential electrical shock or fire hazar ds.
T rouble Shooting 10 Unit doesn’t respond (no power) iPod cannot dock properly AC adaptor isn’t plugged to a wall outlet or the connector is not plugged into the power supply jack on the back of t.
11 Síntoma Posible Problema Solución Solución De Problemas El adaptador de AC no está conectado al tomacorriente o el conector no está conectado a la ficha en la parte posterior de la unidad La u.
12 iHome Products, a division of SDI T echnologies Inc. (hereafter referred to as SDI T echnologies), warrants this product to be free fr om defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original pur chase.
An important point after buying a device iHome iH12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought iHome iH12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data iHome iH12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, iHome iH12 you will learn all the available features of the product, as well as information on its operation. The information that you get iHome iH12 will certainly help you make a decision on the purchase.
If you already are a holder of iHome iH12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime iHome iH12.
However, one of the most important roles played by the user manual is to help in solving problems with iHome iH12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device iHome iH12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
