Instruction/ maintenance manual of the product iH11 iHome
Go to page of 15
Model iH11 Alarm Clock for your iPod ® Questions? Visit www.ihomeaudio.com Model: iH11 Instruction Manual Date: March 5,08 Print color : Black text on white paper Size: 178W x 140H mm.
1 2 3 3 4 5 5 6 6 7 8 8 9 10 11 12 Quick Start Controls and Indicators iH11 Display Install Clock Backup Battery Using The Optional Remote Control Install/Replace the Remote Control Battery T o check .
FCC Information W arning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user ’ s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
1 Quick Start 2:inserts Select the dock insert for your iPod model from the table below and place insert in dock. Never dock an iPod without an insert in place. 3:iPod Insert iPod into dock with proper insert (iPod must not be in a skin or case). iPod will charge while docked.
Controls and Indicators Front Panel Power Off / Alarm Reset Button V olume + Button iPod Dock iPod Play/Pause Button V olume - Button DST Switch Snooze/Dimmer Button Remote Sensor Back Panel 2 DC Jack Alarm Set / Alarm On/Off Button Clock Adj.
Installing Backup Battery 3 iH11 Display I nstall Clock Backup Battery PM Indicator Battery Low Indicator Daylight Saving Time Indicator iPod Indicator Sleep Indicator Alarm Indicator Time Display The iH11 uses a CR2032 button cell backup battery system to provide continuous alarm operation and clock settings in the event of a power failure.
Install/Replace the Remote Control Battery The remote contr ol battery is already installed at the factory . When the remote contr ol stops operating or its range seems reduced, it is time to replace the battery with a new one. 1. The battery door is located on the back end of the remote contr ol.
Setting the Clock Time Note: Press the Clock Adj. Button once during normal operation to view the curr ent time display format (12 hour or 24 hour format). 12 hour is the default format. 1. Press and hold the Clock Adj. Button for 2 seconds until the display flashes.
1. Dock the alr eady playing iPod. The iH11 will automatically turn on and you will hear the music playing from your iPod. The iPod Icon will appear at the right lower corner the display , indicating iPod playing mode. For enhanced bass, slide the EXB Expanded Bass Switch located on the back of the unit to the ON position.
The iH11 Home System for iPod features “Sure Alarm”. If a power failure occurs or the AC adaptor is accidentally disconnected, the unit will change to buzzer alarm to wake you up (provided you have installed backup battery). This unit also features Gentle W aking, which gradually increases the volume of whatever alarm you set.
1. When the iH11 is off or while listening to your iPod, press the Sleep/Minute Set Button to enter sleep mode. The Sleep Icon will appear on the display to indicate it is in sleep mode. Sleep mode has a Gentle Sleep feature which gradually lowers the volume before it shuts of f.
A Consumer Guide to Product Safety 9 When used in the dir ected manner , this unit has been designed and manufactured to ensure your personal safety . However , improper use can result in potential electrical shock or fir e hazards.
T rouble Shooting 10 Unit doesn’t respond (no power) iPod cannot dock properly AC adaptor isn’t plugged to a wall outlet or the connector is not plugged into the power supply jack on the back of t.
11 Síntoma Posible Problema Solución Solución De Problemas El adaptador de AC no está conectado al tomacorriente o el conector no está conectado a la ficha en la parte posterior de la unidad La u.
12 iHome Products, a division of SDI T echnologies Inc. (hereafter referred to as SDI T echnologies), warrants this product to be fr ee from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase.
An important point after buying a device iHome iH11 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought iHome iH11 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data iHome iH11 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, iHome iH11 you will learn all the available features of the product, as well as information on its operation. The information that you get iHome iH11 will certainly help you make a decision on the purchase.
If you already are a holder of iHome iH11, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime iHome iH11.
However, one of the most important roles played by the user manual is to help in solving problems with iHome iH11. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device iHome iH11 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
