Instruction/ maintenance manual of the product I-2532 ICP DAS USA
Go to page of 4
I-2532 CAN to F iber Converter Quick Start User G uide (ver. 1.1, 2008/10/0 3) -----1 Quick Start User G uide 1. Introduction Fiber optic tran smission medium is a good material to pro tect data transmission from EMI/RFI interfere nce and has been used in harsh environm ent extensively .
I-2532 CAN to F iber Converter Quick Start User G uide (ver. 1.1, 2008/10/0 3) -----2 2. A ppearanc e The follow ing figure is the appearan ce of the I-2532. 3. Pin Assignment Port Name Description CAN_L CAN_Low , signal line of CAN Port . CAN_H CAN_High, signal line of CAN Port .
I-2532 CAN to F iber Converter Quick Start User G uide (ver. 1.1, 2008/10/0 3) -----3 4. LED Indicators & Terminal Resistance The t able below shows the meanings of LED indicators on the I-2532. Transmitting/re ceiving one message to/from fiber cable will flash the TD/RD LED once.
I-2532 CAN to F iber Converter Quick Start User G uide (ver. 1.1, 2008/10/0 3) -----4 6. Bus Length & Fiber Length Higher attenuation of f iber will reduce the transmi ssion distance. Users can use follow ing table to know the relationship betw een those tw o.
An important point after buying a device ICP DAS USA I-2532 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ICP DAS USA I-2532 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ICP DAS USA I-2532 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ICP DAS USA I-2532 you will learn all the available features of the product, as well as information on its operation. The information that you get ICP DAS USA I-2532 will certainly help you make a decision on the purchase.
If you already are a holder of ICP DAS USA I-2532, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ICP DAS USA I-2532.
However, one of the most important roles played by the user manual is to help in solving problems with ICP DAS USA I-2532. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ICP DAS USA I-2532 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
