Instruction/ maintenance manual of the product IC-F14/S Icom
Go to page of 21
INSTRUCTION MANUAL This device complies with Part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interfer- ence.
i ii SAFETY TRAINING INFORMA TION Y our Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and clas- sified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such haz- ards.
iv iii FOREWORD READ ALL INSTRUCTIONS carefully and completely before using the transceiver . SA VE THIS INSTRUCTION MANUAL— This instruction manual contains important operating instructions for the IC-F14/ F14S VHF TRANSCEIVER and IC-F24/F24S UHF TRANSCEIVER .
1 1 ACCESSORIES 1 v ■ Supplied accessories The following accessories are supplied: Qty . q Flexible antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 w Battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1 ACCESSORIES 1 2 1 ACCESSORIES ■ Accessory attachments D Flexible antenna Connect the supplied flexible an- tenna to the antenna connector . CAUTION: • NEVER HOLD by the antenna when carrying the transceiver . • T ransmitting without an antenna may damage the transceiver .
4 1 ACCESSORIES 5 1 ACCESSORIES 1 ï Jack cover Attach the jack cover when the optional speaker-microphone is not used. w w q q q w T o attach the jack cover: q Attach the jack cover to the [SP MIC] connector . w T ighten the screws. T o detach the jack cover: q Unscrew the screws with a phillips screwdriver .
7 2 P ANEL DESCRIPTION 2 6 2 P ANEL DESCRIPTION ■ Front, top and side panels q CHANNEL SW/SELECTOR • IC-F14S/F24S: T oggle the channel switch to select the pre-pro- grammed channel 1 or 2. • IC-F14/F24 : Rotate the channel selector to select the pre- programmed memory channels.
9 2 P ANEL DESCRIPTION 2 8 2 P ANEL DESCRIPTION ‘ ‘ LED indicator The LED indicator indicates several informa- tion as follows; (Ref.; R=Red, G=Green, O=Orange) R R R R O O O O G G G G G G R O R O R O R O R O R O R O R O G G G R • TX: T urns Red while transmitting a signal.
10 2 P ANEL DESCRIPTION 11 2 P ANEL DESCRIPTION 2 MONITOR KEY ➥ Mute and release the CTCSS (DTCS) or 2-tone squelch mute. Open any squelch/deactivate any mute while pushing this key .
13 3 CONVENTIONAL OPERA TION 3 12 3 CONVENTIONAL OPERA TION ■ T urning power ON ➥ Rotate [VOL] to turn power ON. ■ Channel selection IC-F14S/F24S: T oggle [CHANNEL SWITCH] to select the channel 1 or 2, or , push one of [MR- CH 1] to [MR-CH 4] key to select a chan- nel directly .
15 3 CONVENTIONAL OPERA TION 3 14 3 CONVENTIONAL OPERA TION ■ Receiving and transmitting NOTE: T ransmitting without an antenna may damage the trans- ceiver .
17 3 CONVENTIONAL OPERA TION 3 16 3 CONVENTIONAL OPERA TION ■ Scrambler function The optional voice scrambler units UT -109 (#01) and UT -1 10 (#01) provide high performance private communication between stations with the same scrambler codes. ➥ Push and hold [Scrambler] to turn the scrambler function ON.
19 4 OPTIONAL UNIT INST ALLA TION 4 18 4 OPTIONAL UNIT INST ALLA TION ■ Optional unit installation Install the optional unit as follows: q Rotate [VOL] to turn the power OFF , and remove the battery pack.
21 5 BA TTERY CHARGING 5 20 5 BA TTER Y CHARGING ■ Battery charging Prior to using the transceiver for the fi rst time, the battery pack must be fully charged for optimum life and operation. CAUTION: T o avoid damage to the transceiver , turn it OFF while charging.
22 5 BA TTERY CHARGING 23 5 BA TTERY CHARGING 5 ■ Optional battery chargers D Rapid charging with the BC-160 The optional BC-160 provides rapid charging of optional Li-Ion bat - tery packs. • An AC adapter (may be supplied with BC-160 depending on ver- sion) or the DC power cable (OPC-515L/CP-17L) is additionally required.
25 5 BA TTERY CHARGING 5 24 5 BA TTERY CHARGING D Rapid charging with the BC-1 19N+AD-106 The optional BC-1 19N provides rapid charging of optional Li-Ion battery packs. The following items are additionally required: • One AD-106 (purchase separately) .
27 6 SWIVEL BEL T CLIP 6 26 6 SWIVEL BEL T CLIP ■ MB-93 contents Qty . q Belt clip …………………………………………………………… 1 w Base clip …………………………………………………………… 1 ■ T o attach q Release the battery pack if it is attached.
29 6 SWIVEL BEL T CLIP 6 28 6 SWIVEL BEL T CLIP ■ T o detach q T urn the transceiver upside down in the direction of the arrow and pull out from the belt clip. w Release the battery pack if it is attached. (p. 3) e Pinch the clip ( q ), and slide the base clip in the direction of the arrow ( w ).
31 7 OPTIONS 7 30 7 OPTIONS D BA TTER Y P ACK • BP-230 Li-Ion BA TTERY P ACK 7.4 V/800 mAh Li-Ion battery pack, allows approx. 5.5 hours* op- eration. • BP-231 Li-Ion BA TTERY P ACK 7.4 V/1 150 mAh Li-Ion battery pack, allows approx. 8 hours* op- eration.
MEMO MEMO IC-F14_F24-2.qxd 04.7.22 0:57 PM Page 32 (1,1).
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A-6369D-1EX- w Printed in Japan © 2004 Icom Inc. IC-F14_F24-2.qxd 04.7.22 0:57 PM Page 34 (1,1).
An important point after buying a device Icom IC-F14/S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Icom IC-F14/S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Icom IC-F14/S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Icom IC-F14/S you will learn all the available features of the product, as well as information on its operation. The information that you get Icom IC-F14/S will certainly help you make a decision on the purchase.
If you already are a holder of Icom IC-F14/S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Icom IC-F14/S.
However, one of the most important roles played by the user manual is to help in solving problems with Icom IC-F14/S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Icom IC-F14/S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
