Instruction/ maintenance manual of the product THINKPAD 62P9239 IBM
Go to page of 8
Thank you for purchasing the IBM ThinkPad T Series computer . Match the items on this list with the items in the box. If any item is missing or damaged, please contact your place of purchase. h Computer h Battery pack Notes: 1. Some models may contain additional items that are not listed.
Setting up your computer 1. Installing the battery . a) Align the side of the battery with the side of the battery compartment in the computer 1 ; then gently push the battery into the compartment 2 . b) Slide the battery latch to lock it.
3. T urning on the system. a) Open the computer display . Press the latches 1 and open the display 2 . Then position the display so that it is convenient for viewing. b) Press the power switch 1 . 4. Using the UltraNav ™ . Y our ThinkPad computer comes with the UltraNav pointing device.
5. Using the volume control. Y ou can adjust the sound level produced by the built-in speakers by using the following three buttons: 1 V olume down 2 V olume up 3 Mute If you mute the sound and then turn off your computer , the sound will remain muted when you turn on your computer again.
Installing memory Increasing memory capacity is an ef fective way to make programs r un faster . Y ou can increase the amount of memory in your computer by installing a PC2100 double data rate (DDR) s.
If the SO-DIMM is already in the memory slot, r emove it to make room for the new one by pressing out on the latches on both edges of the socket at the same time. Be sure to save it for futur e use. 5. Find the notch on the side of the SO-DIMM. Attention: T o avoid damaging the SO-DIMM, do not touch its contact edge.
8. Replace the memory slot cover over the memory slot, aligning the back side of the cover first; then tighten the screw . Attention: When you have added or upgraded a memory card, do not use your computer until you have closed the memory slot cover .
Y our name: _________________________ Company name: _________________________ Model number: _________________________ Serial number: _________________________ Company or reseller service: ____________.
An important point after buying a device IBM THINKPAD 62P9239 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IBM THINKPAD 62P9239 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IBM THINKPAD 62P9239 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IBM THINKPAD 62P9239 you will learn all the available features of the product, as well as information on its operation. The information that you get IBM THINKPAD 62P9239 will certainly help you make a decision on the purchase.
If you already are a holder of IBM THINKPAD 62P9239, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IBM THINKPAD 62P9239.
However, one of the most important roles played by the user manual is to help in solving problems with IBM THINKPAD 62P9239. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IBM THINKPAD 62P9239 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
