Instruction/ maintenance manual of the product DTLA-307030 IBM
Go to page of 2
Requerimientos del sistema para ATA/100 Ÿ Cable conector de 40 y 80 pins Ÿ Una controladora o chip set en placa base con capacidad A TA/ 100 Ÿ Bios compatible ATA / 100 Si no tiene alguno de estos compo n entes, su disco funcionará, pero la velocidad será inferior a 100 MB/ segundo .
9 . Conecte el cable IDE Ÿ Si usted tiene un cable conector de 40 pins, ajuste el conector de l cable en el puerto IDE de la placa base o controladora. El cable 1 del cable IDE está marcad o con una raya. Los conectores está n marcado s para ser insertados en una única posición .
An important point after buying a device IBM DTLA-307030 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IBM DTLA-307030 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IBM DTLA-307030 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IBM DTLA-307030 you will learn all the available features of the product, as well as information on its operation. The information that you get IBM DTLA-307030 will certainly help you make a decision on the purchase.
If you already are a holder of IBM DTLA-307030, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IBM DTLA-307030.
However, one of the most important roles played by the user manual is to help in solving problems with IBM DTLA-307030. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IBM DTLA-307030 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
